• 동아시아식생활학회지
• /
• 제24권3호
• /
• pp.368-374
• /
• 2014

We investigated the physical and cooking properties of commercial noodles supplemented with functional ingredients. RVA (rapid visco analyzer), color, water activity, texture and cooking properties were tested. Noodles containing kudzu showed the highest initial gelatinization temperatures, whereas noodle containing kelp displayed the highest peak viscosity and set back. Holding strength and final viscosity were highest in noodles containing mugwort. The L value ($94.89{\pm}0.02$) of wheat flour noodle was the highest. Among functional noodles, L value ($88.65{\pm}0.01$) and a value ($7.42{\pm}0.02$) of cactus noodle were the highest, whereas b value of pumpkin noodle was $40.81{\pm}0.03$, which was higher value than in other noodles. Water activity of cactus noodle was highest (0.455), but the difference was not significant. Cooking properties (including weight, volume, and water absorption) and turbidity of pumpkin noodles showed the highest growth rate. In terms of texture, hardness was highest ($12836.8{\pm}7.1g/cm^2$) in green tea noodles, and cohesiveness and gumminess were highest in kelp and mugwort noodles. Considerig the quality characteristics of noodles supplemented with mulberry leaves, cactus, mugwort, green tea, pumpkin, kelp or kudzu, pumpkin noodles were most stable in terms of gelatinization and cooking properties.

• 한국농공학회논문집
• /
• 제55권4호
• /
• pp.65-72
• /
• 2013

The physical, mechanical, water purification and temperature properties of fiber reinforced porous hwang-toh green roof concrete have been evaluated in this study. The effect of the depending on replacement ratio of blast furnace slag to cement was investigated such that the replacement ratio is varied to 0 % and 30 %. Also, the replacement ratios of hwang-toh were 0, 20 and 30 %. The polyvinyl alcohol fiber was used for the reinforcing fiber. A series of pH test, unit weight, void ratio, compressive strength, after purification and variation of temperature test have been performed to evaluate the performance, water purification effect and temperature properties of the fiber reinforced porous hwang-toh green roof concrete. The test results indicate that the physical and mechanical properties of fiber reinforced porous hwang-toh green roof concrete is affected by the replacement ratio of the blast furnace slag and hwang-toh contents. Results of purifying water showed that the water purification effect of porous hwang-toh green roof concrete is about 40 %. Also, the temperature properties test results indicate the green roof blocks using fiber reinforced porous hwang-toh green roof concrete have insulation and temperature reduction effect.

• Journal of the Korean Wood Science and Technology
• /
• 제44권5호
• /
• pp.767-775
• /
• 2016

목재의 재질특성은 토양, 지형, 강우, 기후변화 등의 환경적 인자뿐만 아니라 임분 특성에 의해서도 바뀌게 된다. 지역 성림기원에 따라 종가시나무 목재의 물리 역학적 특성을 비교 검토하였다. 지역에 따른 비교분석은 전라남도와 제주도의 종가시나무 천연림을 대상으로 실시하였다. 지역에 따른 결과에서 제주지역은 전남지역에 비하여 높은 생장률을 나타내었으며 역학적 특성에서는 휨강도를 제외한 여러 역학적 특성에서 상관관계가 인정되었으나 실제 값으로 볼 때 큰 차이는 나타나지 않았다. 또한 성림기원에 따른 결과에서는 생장률 및 역학적 특성에서 특별한 차이가 나타나지 않았다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.44-53
• /
• 1994

This research was carried out to investigate the effect of paper sludge addition on formaldehyde emission, and physical and mechanical properties of UF-particleboard. In order to investigate the effect of paper sludge addition to resin, particleboards were bonded with urea-formaldehyde resins containing 5, 10, 15% paper sludge powders of three types(A Type: -200 mesh, B Type: -100~+200 mesh. C Type: -50~+100 mesh), based on weight of resin solid. Also the effect of paper sludge addition to furnish was studied from particleboards fabricated with ratios of sludge to particle of 5:95, 10:90, 15:85 based on oven-dry weight. Tests were conducted on the manufactured particleboards to determine formaldehyde emission, bending properties, internal bond strength and thickness swelling. The obtained results were summarized as follows: The addition of paper sludge powder to resin yielded a higher pH of cured resin. Formaldehyde emission decreased with the increase of paper sludge powder addition to resin and paper sludge composition ratio to furnish. Particleboard bonded with urea-formaldehyde resin containing paper sludge powder and particleboard mixed with paper sludge have similar bending properties(MOR, MOE) and thickness swelling compared with control particleboard. Internal bond strength of particleboards treated with paper sludge were lower than that of control particleboard. The use of paper sludge as scavenger was achieved reduction of formaldehyde emission without depression of physical and mechanical properties of particleboard. Also the use of paper sludge was able to concluded that there is possibility of partial substitution of wood particle materials.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.76-86
• /
• 1998

Effects of processing variables and MAPP (maleic anhydride polypropylene) coupling agent on the properties of composite were discussed for turbulent-air-mixed woodfiber-polypropylenefiber composites. In this research, density, composition ratio, and mat moisture content were established as processing variables, and emulsified MAPP prepared by direct pressure method was incorporated as the coupling agent. And the turbulent air mixer, which was improved in function through alteration of our previous fiber mixer, was used to mix wood fibers and polypropylene fibers. At the addition level of 1% MAPP, based on oven-dried wood fiber weight, woodfiber-polypropylenefiber composites generally showed enhanced the physical and mechanical properties. And composites with low to medium densities of 0.6 to 0.8g/$cm^3$ greatly increased in these property values than with high densities of 1.0g/$cm^3$ or more by adding 1 % MAPP. Thus, MAPP addition was thought to be an effective way of enhancing properties for nonwoven web composites. At the mat moisture contents of 5 to 20%, however, the physical and mechanical properties were not enhanced by adding 1% MAPP. In the composites containing 15% polypropylene fibers, the lowest thickness swelling and water absorption values were observed at the 1% MAPP level. The addition of more than 1% MAPP had the adverse effect on the physical and mechanical properties of composites.

• 한국토양비료학회지
• /
• 제46권4호
• /
• pp.281-287
• /
• 2013

Due to its high salt content and poor physical properties in reclaimed tidal lands, it is important to ameliorate soil physical properties to improve the efficiency of desalination. The objective of this study was to evaluate the changes of soil properties at Saemangeum reclaimed tidal saline soil with various soil amendments. Field experiment was conducted at Saemangeum reclaimed tidal land in Korea and the dominant soil series was Munpo series (coarse loamy, mixed, nonacid, Mesic, Typic, Fluvaquents). Woodchips, crushed-stone, oyster shell, coal bottom ash, and rice hull were added as soil amendments and mixed into surface soil to improve soil physical properties. There was large variability in soil hardness, but oyster shell treatment was significantly lower soil hardness at surface layer. Soil hardness was not significantly different below 15 cm depth. Infiltration rate was also significantly greater at oyster shell treatment. This may be due to the leaching of Ca ions from oyster shell and improved soil properties. However, there was no statistical significant difference of the soil bulk density, moisture content, and porosity. Improved physical properties increased desalinization rate in soil and retarded the resalinization rate when evapotranspiration rate was high. Although soil salinity was significantly decreased with oyster shell amendment, soil pH was increased that should be made up as a soil amendment. Our results indicated that oyster shell application increased infiltration rate and improved soil hardness, and thus oyster shell could be used to improve soil salinity level at Saemangeum reclaimed tidal saline soil.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.127-130
• /
• 1999

Physical properties and microstructure of slag blended cement were investigated to evaluate the influence of sulphates and chlorides. The compressive strength developed as high chloride content dust and gypsum added and accordingly the microstructure modification was showed. The deviation of pore size distribution and hydrates was also observed. From these results we discussed optimum condition of gypsum and high chloride content dust leading to physical properties in this study.

• 한국염색가공학회지
• /
• 제12권2호
• /
• pp.79-88
• /
• 2000

Draw textured yarns have many differences with yarn quality as well as wearing, due to the bulkiness, thermal and physical properties according to the false twist texturing system. In order to improve such property, many studies have been accomplished for developing good textured yarns and their fabrics, but these have been essentially obtained by experimental data or mathematical analysis. This study surveyed various properties of DTY produced by false twist texturing system, namely pin and crossed-belt false twist insertion systems. And 6 yarn specimens of 2 group(pin twisting type, belt twisting type) were measured and analysed.

• 한국결정학회지
• /
• 제12권4호
• /
• pp.227-232
• /
• 2001

Structure-physical properties relationships for Aurivillius ceramics are discussed, with empha-sis in symmetry considerations. Single-crystal materials and polycrystal ceramics are analysed. Electric and magnetic coupling properties are considered. Colour Symmetry Groups and Texture Analysis tool are emploed. Symmetry conditions for polarisation vectors and inverse pole figures related to Aurivillius phases are given. The influence of crystallographic texture of the physical properties of polycrystalline Aurivillius ceramics is evaluated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.723-728
• /
• 1997

The aim of this study is to define the physical properties of successive pours surfaces of concrete by various surface treatment methods with the laps of time. This paper is intended to study on the physical properties (the compressive strength, the tensile strength, the shear bonding strength and the bending strength) of the concrete successive pours surface used concrete surface finishing agent.