• Ecology and Resilient Infrastructure
• /
• v.2 no.1
• /
• pp.33-41
• /
• 2015

In this study, an optimal improvement method of stream channel structure is presented for the enhancement of fish habitat suitability by genetic algorithm. The correlation between fish habitat suitability and physical disturbance in stream is analyzed according to the changes of hydraulic characteristics by channel structure rehabilitation. Zacco koreanus which is an indicator fish of the soundness of aquatic ecosystem was selected as a restoration target species by investigating the community characteristics of fish fauna and river environments in Wonju stream. The habitat suitability is investigated by PHABSIM with the habitat suitability index of Zacco koreanus. Hydraulic analysis by HEC-RAS and physical disturbance evaluation in stream are carried out. The optimal channel width modified for the enhancement of fish habitat suitability is provided. The correlation analysis between habitat suitability and physical disturbance with the change of hydraulic characteristics by channel modification showed that the proper channel modification enhanced fish habitat suitability and mitigated physical disturbance in the stream. The improvement of physical disturbance score by the channel structure rehabilitation for the enhancement of fish habitat suitability was confirmed in this study.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.113-118
• /
• 2010

For a present study, woven type carbon fibers were surface-modified by oxygen plasma to improve adhesive strength between carbon fibers and epoxy. The change of hydrophilic properties by the plasma modification was investigated through the contact angle measurement and the calculation of surface energy of carbon fiber due to the oxygen plasma modification. FESEM and XPS analyses were performed to study the chemical and physical changes on the surface of carbon fibers due to the oxygen plasma modification. Pin-on-disk wear tests were conducted under dry condition using unmodified and plasma-modified carbon/epoxy composites to investigate the effect of plasma modification on the wear behavior of woven type carbon/epoxy composites. The results showed that the friction coefficient and the wear rate of plasma-modified carbon/epoxy composites were lower than those of unmodified carbon/epoxy composites, respectively. XPS analysis showed that new functional group of a carbonyl type was created on the carbon fibers by the $O_2$ plasma treatment, which enhanced adhesive strength between carbon fibers and epoxy, leading to improve wear properties

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.04a
• /
• pp.277-280
• /
• 2001

• The Journal of the Korean dental association
• /
• v.19 no.7 s.146
• /
• pp.569-574
• /
• 1981

• Geomechanics and Engineering
• /
• v.11 no.2
• /
• pp.197-209
• /
• 2016

Clayey rock has large clay mineral content. When in contact with water, this expands considerably and may present a significant hazard to the stability of the rock in geotechnical engineering applications. This is particularly important in the present work, which focused on mitigating some unwelcomed properties of clayey rock. Changes in its physical properties were simulated by subjecting the rock to a low voltage direct current (DC) using copper, steel and aluminum electrodes. The modified mechanism of the coupled electrical and chemical fields acting on the clayey rock was analyzed. It was concluded that the essence of clayey rock electrochemical modification is the electrokinetic effect of the DC field, together with the coupled hydraulic and electrical potential gradients in fine-grained clayey rock, including ion migration, electrophoresis and electro-osmosis. The aluminum cathodes were corroded and generated gibbsite at the anode; the steel and copper cathodes showed no obvious change. The electrical resistivity and uniaxial compressive strength (UCS) of the modified specimens from the anode, intermediate and cathode zones tended to decrease. Samples taken from these zones showed a positive correlation between electric resistivity and UCS.

• Architectural research
• /
• v.18 no.4
• /
• pp.129-136
• /
• 2016

People have experienced physical problems including vision problems with aging; some are normal and some are abnormal. When they have abnormal and impaired vision, they have a lower level of life satisfaction than their sighted peers. For the elderly with sight loss, well-designed housing could be an important indicator for their quality of life. Housing adjustment and modification could help the elderly cope with sight loss, do daily activities more independently, and lead to better quality of life. The purpose of this study is to investigate housing conditions for the elderly with vision impaired, state of housing adjustment or modifications, and the effects of housing conditions on the wellness of the elderly in Korea. For this study, 18 housing cases were investigated and a total number of 65 visually impaired people aged over 55 participated. Housing condition of those participated was poor. Most observed home hazards are level differences in living areas, obstacles in the hallway, confined space that is not allowed structural modification, swing doors from wardrobe or cabinets, color contrast, poor lightings, and etc. Majority of households participated in this study did not make modification or refurbishments, rather many of them tend to adapt themselves to their residential environments. Older adults living in better housing condition and under less difficult environments are likely to have higher life satisfaction. The effects of housing condition on wellness could be more influential when individual capabilities (e.g. health condition) are weaker. The findings underline that with intervention of individual characteristics, the effects of housing and physical environment on negative outcomes of vision loss would get ameliorated or reduced.

• Journal of Microbiology
• /
• v.34 no.3
• /
• pp.270-273
• /
• 1996

Micrococcus luteus purine nucleoside phosphorylase (PNP) has been purified and characterized. The physical and kinetic properties have been described previously. Chemical modification of the enzyme was attempted to gain insight on the active site. The enzyme was inactivated in a time-dependent manner by the arginine- specific modifying reagent phenylglyoxal. There was a linear relationship between the observed rate of inactivation and the phenylglyoxal concentration. At 30 $^{\circ}C$ the bimolecular rate constant for the modification was 0.015 $min^{-1}mM^{-1}$ in 50 mM $NaHCO_3$ buffer, pH 7.5. The plot of logk versus log phenylglyoxal concentration was a strainght line with a slope value of 0.9, indicating that modification of one arginine residue was needed to inactivate the enzyme. Preincubation with saturated solutions of substrates protected the enzyme from inhibition of phenylglyoxal, indicating that reactions with phenylglyoxal were directed at arginyl residues essential for the catalytic functioning of the enzyme.

• Rubber Technology
• /
• v.5 no.2
• /
• pp.94-103
• /
• 2004

The present work describes modification of dual phase filler by electron beam irradiation in presence of multifunctional acrylates like trimethylol propane triacrylate (TMPTA) or silane coupling agent like bis (3-triethoxysilylpropyltetrasulphide) and in-fluence of the modified fillers on the physical properties of styrene-butadiene rubber (SBR) vulcanizates. Modulus at 300 % elongation increases whereas the tensile strength decreases with increase in radiation dose for the dual phase filler loaded styrene-butadiene rubber vulcanizates (SBR). However, modulus and tensile strength significantly increase, which is more, pronounced at higher filler loadings for TMPTA modified dual phase filler loaded SBR. These changes in properties are explained by the equilibrium swelling data and Kraus plot interpreting the polymer-filler interaction. Electron beam modification of the filler results in a reduction of tan ${\delta}$ at $70^{\circ}C$, a parameter for rolling resistance and increase in tan ${\delta}$ at $0^{\circ}C$, a parameter for wet skid resistance of the SBR vulcanizates. Finally, the influence of modified fillers on the properties like abrasion resistance, tear strength and fatigue failure and the improvement in the properties have been explained in terms of polymer-filler interaction.

• Journal of Korea Multimedia Society
• /
• v.25 no.9
• /
• pp.1328-1337
• /
• 2022

Recently, research on various font designs has been actively conducted to deliver effective emotional information in a digital environment. In this study, we propose a Hangul font outline vector modification algorithm that effectively conveys sensitivity according to weather information and can be transformed immediately. The algorithm performs a series of transformations: sets outlines according to design pattern templates, calculates the glyph's position to reflect physical rules, splits outline segments into smaller sizes and deforms the outlines. Through this, we could create several vector font designs such as humidity, cloud, wind, and snow. The usability evaluation was close to good, so it can be used in diverse ways if we improve readability and effective design expression.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1744-1753
• /
• 2007

The purpose of this study was to provide obese middle school girls with walking and behavior modification program(WBMP) by investigating effects of the exercise on their body composition(BC), physical fitness(PF) and metabolic syndrome(MS). Analysis result of the difference between before and after the exercise(paired and independent t-test) was acquired by measuring BC, PF and MS for 12 weeks(60min/day, three a week). 24 Volunteers were 14 years over ${\geq}223.64kg/m^2$ and 15 years over ${\geq}24.00kg/m^2$. In the body composition, waist circumference(WC), body fat mass(BFM), %fat, arm muscle circumference(AMC), total body water(TBW), physical score(PS) were significant difference between the exercise group(EG) and the control group(CG), also including all factors in PF. The components of metabolic syndrome were significant difference between EG and CG, but HDL-C, systolic & diastolic blood pressure were no difference. The metabolic syndrome factors by separate of waist girth were no difference between EG and CG, but BMI, diastolic blood pressure were significant difference. The prevalence of metabolic syndrome was 4 of 24(16.7%) before intervention, but it dropped from 2 to 1 after intervention in WBMP. The components of metabolic syndrome was distributed a big WC>low HDL-C>high TG>hypertension. The changes of AMC, We, PS, BW, 50m run and BFM effect the factors on BMI(35%), WHR(waist-hip ratio, 69%), HDL-C(42%), fasting blood glucose(65%), HOMA-IR index(34%) and systolic blood pressure(39%) respectively. There were significantly increased in breakfast frequency, walking steps, and meal eating period, but decreased in snacks and eating out in exercise group.