• Geomechanics and Engineering
• /
• 제30권1호
• /
• pp.45-49
• /
• 2022

In the present study, a physical model was built for the Jintan underground gas storage cavern group according to the similarity theory. In this regard, four ellipsoid caverns were built with scaled in-situ stresses and internal pressure. Then the stability of underground caverns was analyzed. The obtained results demonstrate that loss of internal pressure adversely affects the safety of caverns and attention should be paid during the operation of gas storage.

• 전력전자학회논문지
• /
• 제20권6호
• /
• pp.498-508
• /
• 2015

In the simulation of photovoltaic (PV) power conditioning systems, PSIM is a widely accepted circuit simulation platform because of its fast speed and C-code support. PSIM provides two kinds of generic PV panel models: functional model and physical model. Whereas the functional model simulates PV in the standard test condition (STC) only, the physical model can emulate changing PV characteristics under varying temperatures and irradiation conditions and is thus more suitable for system simulation. However, the physical model requires complicated parameters from users, and thus it is prone to errors and is difficult to use. In this study, a new PSIM model for PV is presented to solve these problems. The proposed model utilizes manufacturers' datasheet values specified under STC only and excludes user-defined information from input parameters. To achieve good accuracy even in varying environmental conditions, single-diode model parameters are successively tuned to a time-varying virtual datasheet. Comparison with a conventional physical model shows that the proposed model provides more accurate simulation according to error analysis based on the EN50530 standard.

• 한국컴퓨터정보학회논문지
• /
• 제21권1호
• /
• pp.169-180
• /
• 2016

In this paper, we propose a CT-SPI Model based on a physical computing for improving Computational Thinking(CT) for elementary students. This study analyzes the results obtained from applying the CT-SPI model to fourth-grade class. The model is designed to embrace the learning activities and CT elements for three different stages: System thinking, Prototyping and Interaction. For providing curriculum with CT-SPI model, physical SW educational module is developed, so that learners could focus on internalizing CT. The study results indicate that a learning satisfaction and a degree of learner interest improve significantly. Comprehensive CT capability assessment results in three levels show that the capability in lowest level (score is below 4 out of 10) has decreased by 46.6% but capability in highest level (over 7 out of 10) has increased by 20%.

• Korean Journal of Geomatics
• /
• 제2권2호
• /
• pp.139-143
• /
• 2002

The rational polynomial coefficients (RPC) model is a generalized sensor model that is used as an alternative solution for the physical sensor model for IKONOS of the Space Imaging. As the number of sensors increases along with greater complexity, and the standard sensor model is needed, the applicability of the RPC model is increasing. The RPC model has the advantages in being able to substitute for all sensor models, such as the projective, the linear pushbroom and the SAR. This report aimed to generate a RPC model from the physical sensor model of the KOMPSAT-1(Korean Multi-Purpose Satellite) and aerial photography. The KOMPSAT-1 collects 510~730 nm panchromatic imagery with a ground sample distance (GSD) of 6.6 m and a swath width of 17 km by pushbroom scanning. The least square solution was used to estimate the RPC. In addition, data normalization and regularization were applied to improve the accuracy and minimize noise. This study found that the RPC model is suitable for both KOMPSAT-1 and aerial photography.

• 대한간호학회지
• /
• 제38권5호
• /
• pp.639-648
• /
• 2008

Purpose: This study was designed to construct and test a structural equation model on sexual function in women with gynecologic cancer. Methods: The model was constructed and tested under the hypotheses that women's physical changes in sexual function after gynecologic cancer treatment did not automatically lead to sexual dysfunctions. Women's psychosocial factors were considered to be mediating variables. Two hundred twelve women with cervical, ovarian, and endometrial cancer were recruited and asked to complete a survey on their physical factors, psychosocial factors and sexual function. Data was analyzed using SPSS WIN 12.0 and Amos WIN 5.0. Results: Predictors of sexual function in the final model were sexual attitude affected by physical distress and couple's age, sexual information affected by physical distress and couple's age, depression affected by physical distress, and marital intimacy affected by physical distress. Tumor stage and time since last treatment directly affected women's sexual function without any mediating psychosocial variables. However, body image did not affect women's sexual function. Conclusion: Nursing professionals should develop a tailored educational program integrating both physical and psychosocial aspects, and apply it to women and their spouses in order to promote sexual function in women with gynecologic cancer.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2202-2211
• /
• 2010

The wind power prediction system is composed of a meteorological forecasting module, calculation module of wind power output and HMI(Human Machine Interface) visualization system. The final information from this system is a short-term (6hr ahead) and mid-term (48hr ahead) wind power prediction value. The meteorological forecasting module for wind speed and direction forecasting is a combination of physical and statistical model. In this system, the WRF(Weather Research and Forecasting) model, which is a three-dimensional numerical weather model, is used as the physical model and the GFS(Global Forecasting System) models is used for initial condition forecasting. The 100m resolution terrain data is used to improve the accuracy of this system. In addition, optimization of the physical model carried out using historic weather data in Jeju. The mid-term prediction value from the physical model is used in the statistical method for a short-term prediction. The final power prediction is calculated using an optimal adjustment between the currently observed data and data predicted from the power curve model. The final wind power prediction value is provided to customs using a HMI visualization system. The aim of this study is to further improve the accuracy of this prediction system and develop a practical system for power system operation and the energy market in the Smart-Grid.

• Journal of Information Display
• /
• 제10권3호
• /
• pp.101-106
• /
• 2009

In this study, a physical OLED analog behavior model for SPICE simulation was described using the Verilog-A language. The model was presented through theoretical equations for the J-V characteristics of OLED derived according to the internalcarrier emission equation based on a diffusion model at the Schottky barrier contact, and the mobility equation based on the Pool-Frenkel model. The accuracy of this model was examined by comparing it with the results of the device simulation that was conducted.

• Safety and Health at Work
• /
• 제1권2호
• /
• pp.124-133
• /
• 2010

Objectives: This study was conducted to develop a model describing the interaction between lifestyle, job, and postural factors and parts of the upper extremities in shipyard workers. Methods: A questionnaire survey was given to 2,140 workers at a shipyard in Ulsan City. The questionnaire consisted of questions regarding the subjects' general characteristics, lifestyle, tenure, physical burden, job control, posture and musculoskeletal symptoms. The overall relationship between variables was analyzed by a structural equation model (SEM). Results: The positive rate of upper extremity musculoskeletal symptoms increased in employees who worked longer hours, had severe physical burden, and did not have any control over their job. Work with a more frequent unstable posture and for longer hours was also associated with an increased positive rate of musculoskeletal symptoms. Multiple logistic regression analysis showed that unstable posture and physical burden were closely related to the positive rate of musculoskeletal symptoms after controlling for age, smoking, drinking, exercise, tenure, and job control. In SEM analysis, work-related musculoskeletal disease was influenced directly and indirectly by physical and job stress factors, lifestyle, age, and tenure (p < 0.05). The strongest correlations were found between physical factors and work-related musculoskeletal disease. Conclusion: The model in this study provides a better approximation of the complexity of the actual relationship between risk factors and work-related musculoskeletal disorders. Among the variables evaluated in this study, physical factors (work posture) had the strongest association with musculoskeletal disorders.

• 운동영양학회지
• /
• 제25권1호
• /
• pp.23-29
• /
• 2021

[Purpose] This preliminary study aimed to develop a regression model to estimate the non-exercise activity thermogenesis (NEAT) of Korean adults using various easy-to-measure dependent variables. [Methods] NEAT was measured in 71 healthy adults (male n = 29; female n = 42). Statistical analysis was performed to develop a NEAT estimation regression model using the stepwise regression method. [Results] We confirmed that age^A, weight^B, heart rate (HR)_average^C, weight × HR_average^D, weight × HR_sum^E, systolic blood pressure (SBP) × HR_rest^F, fat mass ÷ height^2G, gender × HR_average^H, and gender × weight × HR_sum^I were important variables in various NEAT activity regression models. There was no significant difference between the measured NEAT values obtained using a metabolic gas analyzer and the predicted NEAT. [Conclusion] This preliminary study developed a regression model to estimate the NEAT in healthy Korean adults. The regression model was as follows: sitting = 1.431 - 0.013 × (A) + 0.00014 × (D) - 0.00005 × (F) + 0.006 × (H); leg jiggling = 1.102 - 0.011 × (A) + 0.013 × (B) + 0.005 × (H); standing = 1.713 - 0.013 × (A) + 0.0000017 × (I); 4.5 km/h walking = 0.864 + 0.035 × (B) + 0.0000041 × (E); 6.0 km/h walking = 4.029 - 0.024 × (C) + 0.00071 × (D); climbing up 1 stair = 1.308 - 0.016 × (A) + 0.00035 × (D) - 0.000085 × (F) - 0.098 × (G); and climbing up 2 stairs = 1.442 - 0.023 × (A) - 0.000093 × (F) - 0.121 × (G) + 0.0000624 × (E).

• 한국IT서비스학회지
• /
• 제7권4호
• /
• pp.247-268
• /
• 2008

This study aims to develop an integration performance measurement model for each stage of information systems integration. In order to achieve the purpose of the research, first of all, the concepts of IS integration or consolidation are analyzed through theoretical and practical reviews. Also, a number of important studies of domestic and overseas cases about the stage models of IS integration or consolidation are critically reviewed. Second, we proposed three step stage model of is integration, Physical Integration stage, Application Integration stage, Service Integration stage, and Also proposed the performance measurement model for each stage of information systems integration. Third, especially in case of performance indicators and performance measurement methodology for physical integration stage are illustratively proposed, based upon the case of NCIA (National Computing Integration Agency) in Korea. This study provides the theoretical basis for reasonably deriving the stage model and performance measurement model for each stage of Information Systems Integration, and they are validating through investigating domestic and foreign practices. The results of this study are very likely to contribute to presenting the practical guideline for desirably implementing is integration or IS consolidation.