• 펄프종이기술
• /
• 제30권2호
• /
• pp.47-54
• /
• 1998

Refining is one of the most important processes of fiber treatment that provides optical and physical properties of final paper products. The evaluation method of refining progress is usually freeness (CSF) or wetness (SR) test because of its rapidity and convenience. However, there are some deficiencies in using freeness or wetness test to evaluate pulp fibers accurately because its results are more influenced by fines contents than extent of fibers treatment. The objective of this study is to show the deficiency of wetness in evaluating the refining process. For this, beating is done by varying the beating load. Handsheets are made after beating until 25 and $32^{\circ}C$ SR, and then paper properties are measured. Refined fibers are analyzed by fiber length, fines contents, curl, kink, WRV, and zero-span tensile strength. The results show that longer beating time is required to reach the same wetness at lower beating load. There are differences in the average fiber length, distribution curve of fiber length, fines contents, curl, kink, WRV of long fiber fraction, drainage time, and zero-span tensile strength of rewetted sample at different beating load. At the low beating load in the same wetness, apparent density, breaking length, burst strength, and tear strength are higher, while opacity and air permeability are lower than those of the high beating load. Using Page s equation, which shows the relationship among tensile strength, intrinsic fiber strength, and interfiber bonding strength, interfiber bonding strength is calculated and analyzed to explain final paper properties. At $25^{\circ}C$ SR, interfiber bonding strength is only slightly higher at 2.5kgf beating load, while the intrinsic fiber strength is substantially higher. At $32^{\circ}C$ SR, intrinsic fiber strength is a little bit higher at 2.5kgf beating load, and interfiber bonding strength is remarkably higher than those of 5.6kgf beating load. These results can be used to explain the different properties of the final paper at selected beating loads.

• Journal of Korean Biological Nursing Science
• /
• 제17권4호
• /
• pp.315-323
• /
• 2015

Purpose: This study compared the effect of music and noise blocking on the vital signs, postoperative pain, analgesic use, length of stay in the Post Anesthesia Care Unit (PACU) and satisfaction after a laparoscopic colectomy. Methods: This randomized controlled trial was performed in a 555-bed National Cancer Center, from February 13 through May 31, 2012. Subjects consisted of 69 patients who underwent a laparoscopic colectomy under general anesthesia, and were recruited by informed notices. The inclusion criteria were patients between the ages of 35-75, with an American Society Anesthesiologist physical classification I or II. The subjects were randomly allocated to three groups; music therapy group (MTG), noise blocking group (NBG) and control group (CG). Collected data were analyzed using Repeated measures ANOVA, one-way ANOVA and Kruskal-Wallis test through IBM SPSS (Version 19.0). Results: There were no significant differences in vital signs among the three groups. Postoperative pain in MTG (p<.05) and NBG (p<.05) was significantly decreased compared to CG. The amount of analgesics (p=.030) and length of stay at PACU (p=.021) in MTG was significantly decreased compared to NBG or CG; satisfaction in MTG and NBG was significantly higher compared to CG. Conclusion: Music seems to reduce postoperative pain, the amount of analgesics, and the length of stay at PACU. Therefore, music therapy is considered to be included in nursing intervention for postoperative patients at PACU.

• 한국습지학회지
• /
• 제14권4호
• /
• pp.457-469
• /
• 2012

우리나라 서해 근해역 4개지역의 해저표면형상 자료를 분석하였다. 우리나라 서해안은 조차가 클 뿐 아니라 파랑 또한 상당히 크며, 해저질의 입도가 약 1.2 ~ 1.6 ${\varnothing}$의 분포로 상대적으로 입경이 큰 사질의 형태이다. 자료를 취한 해역에서의 수심은 10 ~ 65 meters로서 해저면의 표면형상이 잘 발달해 있는 편이며, 해저표면형상에서 모래결 길이(ripple length)는 약 6 ~ 13 meters 범위이다. 기존의 모래결 길이를 예측할 수 있는 예측식 중 파랑과 흐름이 공존할 때에 적용할 수 있는 예측식으로는 Khelifa and Ouellet 과 Soulsby 가 있다. 조사한 모래결 길이를 이 두 식으로 예측한 결과 두 식 모두 실제 측정값보다 작은 값을 나타내었다. 이는 기존의 두 예측식이 우리나라 서해안과는 다른 해역에서 구한 자료로부터 얻은 식이거나 실험실에서 얻어졌기 때문으로 판단된다. 기존의 예측식에 일정한 보정계수를 곱하여 수정한 결과 우리나라 서해안에서 관측한 모래결 길이를 잘 표현할 수 있게 되었다.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.10-18
• /
• 2000

To improve the physical properties of OCC (Old Corrugated Container) fibers, we used the mechanical pre-treatment on the fibers before refining . The mechanical action in the Hobart mixer induced high shear and compression on the fibers, which resulted in changes of fiber internal structure, and microcompressions on the surface of the fibers. We evaluated the amount of mechanical treatment on the fibers by fiber curl index for convenience. Four different refining techniques were applied to the pre-treated fibers (valley beater, Kady mill, PFI mill, and Impact refining) to find the best combination of the pre-treatment and the refining methods. Conclusions were summarized as followed. 1. Mechanical pre-treatment in Hobart mixer for more than 1 hour caused the increase of curl index of OCC fibers, and increased breaking length, burst index, and tear index the handsheets more than 10 % in this experiment. 2. Kady mill and PFI mill refining were effective in keeping fiber length from shortening Kady mill and Valley beater refining straightened out the fiber curls, and reduced the curl index. 3. Valley beating reduced fiber length very fast and generated fines more than other refining methods. 4. To increase breaking length and burst strength while keeping tear strength , combination of mechanical pre-treatment and Valley beating were most effective.

• 한국의류학회지
• /
• 제38권5호
• /
• pp.733-742
• /
• 2014

This study investigated the degree of inconvenience in existing ready-made clothes and clothing preferences through a survey of 197 wheelchair-bound males in order to provide preliminary data for the development of a suit that considers the physical characteristics and requirements of the disabled in wheelchairs for improved quality of living and positive interpersonal relations. Among the survey respondents, the 30s to 40s age group was the largest at 71.6%. The most common type of disability was myelopathy at 72.6%. Also 59.9% of respondents had a job and ongoing external and social activities. As for the duration of wheelchair use, 10-20 years was the longest at 40.6%. It was found from the survey that respondents felt inconvenienced with existing clothes and changing pants was most inconvenient. Most experienced having their clothes altered due to the difficulty in finding well-fitting ones; consequently, the length of pants was the most altered item because pants are based on the size of a standing man and there exists a discrepancy in length due to the atrophy of the legs of the disabled. They preferred one style in general for clothing preferences as well as common design and details as well. However, they preferred a style with a short front and long back due to a discomfort in jacket length. A short length was the most complained about pants item.

• 대한가정학회지
• /
• 제26권3호
• /
• pp.135-152
• /
• 1988

The purpose of this study was to survey the improvement activities for the apartment house ; and to examine the relationship between apartment residents and their housing improvement activities in order to present some informations for the further studies and plans of apartment design and housing policy. Library and questionnaire survey methods were used in this research. the sample was taken from 102 housewives living in the apartments over 45 pyong (1602 sq. ft.), in Seoul, Data were analyzed with the SPSS using frequency, percentage, chi-square test, F-test, Duncan's multiple range test, η2, and C2. The results were as follows: 1. It was found that residents had experienced with 3.6 kinds of housing improvement activities. Living rooms, dining rooms, and kitchens in family living areas ; balconies and utility rooms in utility areas were improved for the physical convenience and quality of living. 2. This survey indicated that apartment residents evaluated thier housing condition as high, except storage spaces and outdoor noises. 3. About 80% of respondents were expected to live continuously in the current apartments because they were satisfied with the size of thier residences, However, they wanted to improve the inside of the entire apartment, especially bathrooms. 4. Variables which had a significant relationship in housing improvement activities in the past were the length of residence, the expected length of residence, and the characteristic of residence. 5. The expected length of residence, and the characteristic of residence were found to be effective variable for evaluating the current residence. 6. Finally, the expected length of residence, and the characteristic of residence were significant variables of the housing plan in the future. Housing improvement activities were prevalent recently and expected to be continued in the future. It can be said, therefore, that apartment residents have a long -term plan to live in one place rather than moving out ever two-three years.

• 한국추진공학회지
• /
• 제6권2호
• /
• pp.37-44
• /
• 2002

액체로켓엔진에 사용되는 2-유체 동축형 분사기의 분무 연소 특성을 수치적으로 해석하였다. 가스 역학적 상호작용에 의한 미립화 및 그에 따른 물리 현상들에 대해 유동에 대한 보존방정식과 이론식들을 적용, 수치화하여 액체 제트의 상태, 제트의 속도, 제트의 붕괴길이, 액적의 크기등을 예측 하였으며, 액체제트 분사공 크기에 따른 미립화의 변화를 고찰하였다. 모델 검증을 위하여 액체 제트의 접촉길이와 액적의 크기를 기존의 실험결과와 비교하였으며, 그 결과 정성적으로 일치함을 나타내었다. 액체 제트의 접촉길이는 분사공의 직경이 증가할수록 짧아지고 액적의 크기도 분사공의 직경이 증가할수록 작아진다. 액체 제트는 박리율 증가에 따른 분무화에 의하여 단면적이 감소되며, 그에 따른 질량유속의 보존과 가스로부터의 운동량 화산에 따라 미립화가 활발해지는 영역으로부터 그 속도가 급속히 증가된다.

• 한국컴퓨터정보학회논문지
• /
• 제24권10호
• /
• pp.117-127
• /
• 2019

본 연구에서는 사이즈코리아의 제7차 인체측정조사 자료 중 40-59세 중년 남성의 직접 계측 데이터를 분석하여 전신 체형의 특성을 알아보고, 중년 남성의 전신 체형을 유형화하고자 하였다. 이를 통해 맞음새가 우수한 중년 남성의 의복패턴 제작에 필요한 기초자료를 제공하고자 하였다. 전신 계측자료는 SPSS Ver. 24.0 프로그램으로 분석하였다. 요인은 신체의 수평, 수직, 어깨관련, 앞중심길이, 다리굵기, 어깨처짐 등 6개 요인이 추출되었다. 중년 남성의 전신체형은 3개로 유형화되어 유형1은 둘레는 가늘고 너비는 좁으며, 높이는 낮고 앞중심길이는 짧으며 다리가 얇은 체형이다. 유형 2는 높이는 높고 앞중심길이는 길며, 둘레 및 너비는 보통으로 다리가 굵고 어깨가 처진 체형이다. 유형3은 둘레는 크고 너비는 넓으며 어깨도 넓은 체형으로 앞중심길이는 긴 편이지만 신체높이는 낮고 어깨가 처지지 않은 체형이다. 중년 남성은 복부의 돌출 및 지방축적에 따른 둘레와 두께 항목의 증가가 두드러지므로 이를 반영한 패턴 제작이 필요할 것으로 생각된다.

• 대한통합의학회지
• /
• 제7권2호
• /
• pp.39-47
• /
• 2019

Purpose : This study was investigated effects of vibration on scapular winging of knee push-up plus exercise. Methods : Twenty-eight female subjects with scapular winging were evaluated after performing knee push-up plus exercise, with or without vibration, three times a week for four weeks. Muscle activation of the serratus anterior and upper trapezius, and the ratio of activation of the upper trapezius to serratus anterior were measured using surface EMG; and scapular winging length was measured by using the caliper. Results : The findings showed that knee push-up plus exercise -with and without- vibration induced a significant increase in muscle activation of serratus anterior (p<.05) and a significant decrease in muscle activation of the upper trapezius (p<.05), the ratio of muscle activation of the upper trapezius to the serratus anterior (p<.05) and scapular winging length (p<.05). There was also a significant difference in muscle activation of the serratus anterior (p<.05) and upper trapezius (p<.05) between control and experimental group at post-test. Conclusion : This study suggests positive clinical effects of knee push-up plus exercise with vibration which enhanced muscle activation of serratus anterior and reduced muscle activation of upper trapezius in person with scapular winging. However, vibration had no effectiveness to improve muscle imbalance between serratus anterior and upper trapezius, and reduce the scapular winging length.

• 대한통합의학회지
• /
• 제9권4호
• /
• pp.85-89
• /
• 2021

Background : Klippel-Trenaunay-Weber syndrome (KTS) is a rare congenital medical condition characterized by complex vascular malformation. KTS consists of a classic triad of capillary malformation (hemangioma), venous malformations and bone or soft tissue hypertrophy causing limb asymmetry. The aim of this report is to describe management for gait disturbance and foot pain in a Patient with KTS using custom-made total contact insole. Case presentation : A 32-year-old man with KTS presented with a 3-year history of gait disturbance on hard surface due to right first toe pain and Achilles tendon tightness. The patient had soft tissue hypertrophy, varicose veins and port-wine stains over the right lower limb associated with KTS. True leg length discrepancy was 2 cm. We prescribed custom-made total contact insole to protect his deformed foot and correct leg length discrepancy. The insole of right side included wedge shaped heel lift and the insole of left side included full length lift to add extra support on unaffected side. Also, we provided compression stocking and physiotherapy including manual lymphatic drainage for lymphedema and stretching exercise for tightness in right lower extremity. At 3 years follow-up, postural alignment including pelvic obliquity was improved using a custom-made total contact insole. The degree of scoliosis and foot pain were also reduced. Conclusion : An individualized and multidisciplinary approach is essential regarding the complexity of comorbidities in patients with KTS. For patients with KTS, orthotic management should be considered to prevent and correct deformities related to KTS. Active orthotic management, compression stocking and physiotherapy can enhance the quality of life and function in patients.