• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.2
• /
• pp.47-54
• /
• 1998

Refining is one of the most important processes of fiber treatment that provides optical and physical properties of final paper products. The evaluation method of refining progress is usually freeness (CSF) or wetness (SR) test because of its rapidity and convenience. However, there are some deficiencies in using freeness or wetness test to evaluate pulp fibers accurately because its results are more influenced by fines contents than extent of fibers treatment. The objective of this study is to show the deficiency of wetness in evaluating the refining process. For this, beating is done by varying the beating load. Handsheets are made after beating until 25 and $32^{\circ}C$ SR, and then paper properties are measured. Refined fibers are analyzed by fiber length, fines contents, curl, kink, WRV, and zero-span tensile strength. The results show that longer beating time is required to reach the same wetness at lower beating load. There are differences in the average fiber length, distribution curve of fiber length, fines contents, curl, kink, WRV of long fiber fraction, drainage time, and zero-span tensile strength of rewetted sample at different beating load. At the low beating load in the same wetness, apparent density, breaking length, burst strength, and tear strength are higher, while opacity and air permeability are lower than those of the high beating load. Using Page s equation, which shows the relationship among tensile strength, intrinsic fiber strength, and interfiber bonding strength, interfiber bonding strength is calculated and analyzed to explain final paper properties. At $25^{\circ}C$ SR, interfiber bonding strength is only slightly higher at 2.5kgf beating load, while the intrinsic fiber strength is substantially higher. At $32^{\circ}C$ SR, intrinsic fiber strength is a little bit higher at 2.5kgf beating load, and interfiber bonding strength is remarkably higher than those of 5.6kgf beating load. These results can be used to explain the different properties of the final paper at selected beating loads.

• Journal of Korean Biological Nursing Science
• /
• v.17 no.4
• /
• pp.315-323
• /
• 2015

Purpose: This study compared the effect of music and noise blocking on the vital signs, postoperative pain, analgesic use, length of stay in the Post Anesthesia Care Unit (PACU) and satisfaction after a laparoscopic colectomy. Methods: This randomized controlled trial was performed in a 555-bed National Cancer Center, from February 13 through May 31, 2012. Subjects consisted of 69 patients who underwent a laparoscopic colectomy under general anesthesia, and were recruited by informed notices. The inclusion criteria were patients between the ages of 35-75, with an American Society Anesthesiologist physical classification I or II. The subjects were randomly allocated to three groups; music therapy group (MTG), noise blocking group (NBG) and control group (CG). Collected data were analyzed using Repeated measures ANOVA, one-way ANOVA and Kruskal-Wallis test through IBM SPSS (Version 19.0). Results: There were no significant differences in vital signs among the three groups. Postoperative pain in MTG (p<.05) and NBG (p<.05) was significantly decreased compared to CG. The amount of analgesics (p=.030) and length of stay at PACU (p=.021) in MTG was significantly decreased compared to NBG or CG; satisfaction in MTG and NBG was significantly higher compared to CG. Conclusion: Music seems to reduce postoperative pain, the amount of analgesics, and the length of stay at PACU. Therefore, music therapy is considered to be included in nursing intervention for postoperative patients at PACU.

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.457-469
• /
• 2012

Bedform data at 4 shallow zones in the Yellow Sea where waves as well as tidal range are high and bed material is relatively coarse were collected and analyzed here. Water depths in the study area where the bedform data were collected are 10 ~ 65 meters, and ripple lengths well developed are between 6 ~ 13 meters. Existing empirical formula for prediction of ripple length as for coexistence of waves and currents include Khelifa and Ouellet(2000) and Soulsby(2005), both of which have been based on laboratory measurements, or field measurements at different physical environment from the Yellow Sea with respect to tidal range, wave strength, and bed material. New scaling factors are proposed here for better prediction of the ripple length on coastal zone in the Yellow Sea.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.10-18
• /
• 2000

To improve the physical properties of OCC (Old Corrugated Container) fibers, we used the mechanical pre-treatment on the fibers before refining . The mechanical action in the Hobart mixer induced high shear and compression on the fibers, which resulted in changes of fiber internal structure, and microcompressions on the surface of the fibers. We evaluated the amount of mechanical treatment on the fibers by fiber curl index for convenience. Four different refining techniques were applied to the pre-treated fibers (valley beater, Kady mill, PFI mill, and Impact refining) to find the best combination of the pre-treatment and the refining methods. Conclusions were summarized as followed. 1. Mechanical pre-treatment in Hobart mixer for more than 1 hour caused the increase of curl index of OCC fibers, and increased breaking length, burst index, and tear index the handsheets more than 10 % in this experiment. 2. Kady mill and PFI mill refining were effective in keeping fiber length from shortening Kady mill and Valley beater refining straightened out the fiber curls, and reduced the curl index. 3. Valley beating reduced fiber length very fast and generated fines more than other refining methods. 4. To increase breaking length and burst strength while keeping tear strength , combination of mechanical pre-treatment and Valley beating were most effective.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.5
• /
• pp.733-742
• /
• 2014

This study investigated the degree of inconvenience in existing ready-made clothes and clothing preferences through a survey of 197 wheelchair-bound males in order to provide preliminary data for the development of a suit that considers the physical characteristics and requirements of the disabled in wheelchairs for improved quality of living and positive interpersonal relations. Among the survey respondents, the 30s to 40s age group was the largest at 71.6%. The most common type of disability was myelopathy at 72.6%. Also 59.9% of respondents had a job and ongoing external and social activities. As for the duration of wheelchair use, 10-20 years was the longest at 40.6%. It was found from the survey that respondents felt inconvenienced with existing clothes and changing pants was most inconvenient. Most experienced having their clothes altered due to the difficulty in finding well-fitting ones; consequently, the length of pants was the most altered item because pants are based on the size of a standing man and there exists a discrepancy in length due to the atrophy of the legs of the disabled. They preferred one style in general for clothing preferences as well as common design and details as well. However, they preferred a style with a short front and long back due to a discomfort in jacket length. A short length was the most complained about pants item.

• Journal of the Korean Home Economics Association
• /
• v.26 no.3
• /
• pp.135-152
• /
• 1988

The purpose of this study was to survey the improvement activities for the apartment house ; and to examine the relationship between apartment residents and their housing improvement activities in order to present some informations for the further studies and plans of apartment design and housing policy. Library and questionnaire survey methods were used in this research. the sample was taken from 102 housewives living in the apartments over 45 pyong (1602 sq. ft.), in Seoul, Data were analyzed with the SPSS using frequency, percentage, chi-square test, F-test, Duncan's multiple range test, η2, and C2. The results were as follows: 1. It was found that residents had experienced with 3.6 kinds of housing improvement activities. Living rooms, dining rooms, and kitchens in family living areas ; balconies and utility rooms in utility areas were improved for the physical convenience and quality of living. 2. This survey indicated that apartment residents evaluated thier housing condition as high, except storage spaces and outdoor noises. 3. About 80% of respondents were expected to live continuously in the current apartments because they were satisfied with the size of thier residences, However, they wanted to improve the inside of the entire apartment, especially bathrooms. 4. Variables which had a significant relationship in housing improvement activities in the past were the length of residence, the expected length of residence, and the characteristic of residence. 5. The expected length of residence, and the characteristic of residence were found to be effective variable for evaluating the current residence. 6. Finally, the expected length of residence, and the characteristic of residence were significant variables of the housing plan in the future. Housing improvement activities were prevalent recently and expected to be continued in the future. It can be said, therefore, that apartment residents have a long -term plan to live in one place rather than moving out ever two-three years.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.2
• /
• pp.37-44
• /
• 2002

A theoretical study of spray and combustion characteristics due to coaxial twin-fluid injection is conducted to investigate the effects of liquid jet property, droplet size, contact length and liquid jet velocity. Model is properly validated with measurements and shows good agreement. Prediction of jet contact length, droplet size, liquid jet velocity reflects genuine features of coaxial injection in physical and practical aspects. Both the jet contact length and tile droplet size are reduced in a linear manner with an increase of injector diameter. Cross sectional area of liquid intact core is reduced with augmented jet splitting rate, thus the jet is accelerated to maintain the mass continuity and with an assistant of momentum diffusion by burnt gas.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.117-127
• /
• 2019

The purpose of this study was to analyze the direct measurement data of 40-59 year old middle-aged men from Size Korea's 7th anthropometric survey, and to identify the body shape characteristics and to type the body shape of middle-aged men. Through this, this study aimed to provide basic data necessary for the clothing patterns of middle-aged men with excellent fit. The data was SPSS Ver. 24.0 program analysis. Factors extracted six including body horizontal, vertical, shoulder, waist front length, leg thickness, and shoulder deflections. The body shape of middle-aged men was classified into three types. Type 1 had a thin body circumference, a narrow width, a low height, a short waist front length, and a thin ankle and calf. Type 2 had a high body height, a long waist front length, a normal circumference and width, a thick ankle, a calf, and a sagging shoulder. Type 3 had a large body circumference, a wide body, a wide shoulder, and a long waist front length. A prominent feature of the changes in body shape of middle-aged men is the increase in the circumference and thickness items due to abdominal protrusion and fat accumulation. Therefore, pattern design according to these physical characteristics is considered to be necessary.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.2
• /
• pp.39-47
• /
• 2019

Purpose : This study was investigated effects of vibration on scapular winging of knee push-up plus exercise. Methods : Twenty-eight female subjects with scapular winging were evaluated after performing knee push-up plus exercise, with or without vibration, three times a week for four weeks. Muscle activation of the serratus anterior and upper trapezius, and the ratio of activation of the upper trapezius to serratus anterior were measured using surface EMG; and scapular winging length was measured by using the caliper. Results : The findings showed that knee push-up plus exercise -with and without- vibration induced a significant increase in muscle activation of serratus anterior (p<.05) and a significant decrease in muscle activation of the upper trapezius (p<.05), the ratio of muscle activation of the upper trapezius to the serratus anterior (p<.05) and scapular winging length (p<.05). There was also a significant difference in muscle activation of the serratus anterior (p<.05) and upper trapezius (p<.05) between control and experimental group at post-test. Conclusion : This study suggests positive clinical effects of knee push-up plus exercise with vibration which enhanced muscle activation of serratus anterior and reduced muscle activation of upper trapezius in person with scapular winging. However, vibration had no effectiveness to improve muscle imbalance between serratus anterior and upper trapezius, and reduce the scapular winging length.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.4
• /
• pp.85-89
• /
• 2021

Background : Klippel-Trenaunay-Weber syndrome (KTS) is a rare congenital medical condition characterized by complex vascular malformation. KTS consists of a classic triad of capillary malformation (hemangioma), venous malformations and bone or soft tissue hypertrophy causing limb asymmetry. The aim of this report is to describe management for gait disturbance and foot pain in a Patient with KTS using custom-made total contact insole. Case presentation : A 32-year-old man with KTS presented with a 3-year history of gait disturbance on hard surface due to right first toe pain and Achilles tendon tightness. The patient had soft tissue hypertrophy, varicose veins and port-wine stains over the right lower limb associated with KTS. True leg length discrepancy was 2 cm. We prescribed custom-made total contact insole to protect his deformed foot and correct leg length discrepancy. The insole of right side included wedge shaped heel lift and the insole of left side included full length lift to add extra support on unaffected side. Also, we provided compression stocking and physiotherapy including manual lymphatic drainage for lymphedema and stretching exercise for tightness in right lower extremity. At 3 years follow-up, postural alignment including pelvic obliquity was improved using a custom-made total contact insole. The degree of scoliosis and foot pain were also reduced. Conclusion : An individualized and multidisciplinary approach is essential regarding the complexity of comorbidities in patients with KTS. For patients with KTS, orthotic management should be considered to prevent and correct deformities related to KTS. Active orthotic management, compression stocking and physiotherapy can enhance the quality of life and function in patients.