• 한국건축시공학회지
• /
• 제15권4호
• /
• pp.391-396
• /
• 2015

도심지 건물의 증가는 친환경 공간에 대한 요구를 발생시키고, 이에 따라 옥상 및 인공지반 녹화의 보급이 급속히 증가되고 있다. 녹화시공은 방수층, 방근층, 보호콘크리트 등과 같이 다양한 재료를 시공하므로 시공시간이 길고, 하자 발생가능성이 높아진다. 본 연구는 기존의 녹화시스템 시공단계를 단축, 시공성을 향상시킨 새로운 녹화시스템에 사용하는 일체화된 방수 방근 하이브리드 시트의 물리적성능, 내구성, 방수성, 방근성을 평가함으로써 성능수준을 확인하고, 현장 적용 여부를 판단하고자 하였다. 시험결과, 우수한 물리적 성능 및 내구성, 방수성, 방근성을 확인하였으며, 향후 mock-up 시험을 수행하여 장기성능을 검증 중이다.

• 성인간호학회지
• /
• 제15권2호
• /
• pp.193-204
• /
• 2003

Purpose: Perceived barriers to exercise were investigated for adults. Method: A total 1266 subjects were selected by a quota sampling method with age, gender, and residence. Perceived barriers were categorized under 4 groups: knowledge, psychological, physical, and external factors. All 23 items of perceived barriers were responded on a dichotomous (yes/no) scale. Result: Mean number of perceived barriers was 4.61 and 87.9% subjects perceived at least one barrier which prevented involvement in exercise. External barriers ranked highest, followed in order by psychological, knowledge, and physical barriers. Most factors of perceived barriers were found to be different by age, gender, and residence, in that, the younger, female, living in Daejeon subjects were found to respond with more barriers than the older, male, living in Chungju or Seoul. Conclusion: Perceived barriers to exercise are differenct by age, gender, and residence. Therefore, it is recommended that age, gender, and residence of subjects must be considered in order to develop exercise programs and public campaigns.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.102-103
• /
• 2020

Research for heat insulation of buildings is being carried out, in which a heat exchange barrier is used around the openings and balcony parts as a method for heat exchange blocks. However, the preparation for a fire is inadequate. In order to improve the EPS used as a heat exchange barrier in an attempt to solve this, there is a study on lightweight foamed concrete, but as the amount of EPS used for strengthening fire resistance increases, it becomes lower. There is no strength applied to buildings, and also. There is a limit to the amount of EPS used. In the study, we use oyster shells to secure the EPS replacement rate limit of lightweight Foamed concrete, and try to measure the change of physical properties depending on the unit cement content.

• 디자인학연구
• /
• 제18권1호
• /
• pp.81-90
• /
• 2005

유니버설 디자인은 베리어 프리(barrier-free), 수용 가능한(adaptive), 평생의 디자인(life-span design)의 세 개념을 포함한다. 그것은 단순히 장애가 있는 사람들을 위한 접근성 차원의 디자인이라기보다는 확장된 개념으로서 인간이 접하는 모든 물리적 환경이나 시설들을 접근하기 쉽고 사용하기 편하도록 디자인하는 것이다. 본 연구에서는 그러한 유니버설디자인의 현재와 미래 방향을 부엌디자인의 사례를 중심으로 조망해보았다. 문헌상의 디자인지침과 사례들에서 살펴본 현재 시장의 추이와 선행연구들의 특징들에서 살펴본 시대적 추이를 토대로 제안한다면, 향후 유니버설 부엌디자인은 '사용자에 따른 대량맞춤', '신기술의 적용', '심리적 측면의 고려' 등의 방향으로 전개되어야 할 것이다. 또한 유니버설디자인이 확산되기 위해서는 '적절한 경제적 비용문제의 해갈, '사회적 인식의 확산', 디자인에 있어 '문제인식의 전환'이 있어야 할 것으로 판단된다. 아직 우리나라에서는 유니버설디자인개념의 디자인모델들이 여러 분야에서 양산되고 있는 실정은 아니다. 앞으로 우리나라 상황에 적합한 유니버설디자인을 개발 연구하기 위해서는 물리적, 지각적, 심리적 측면뿐만 아니라 우리의 문화적, 지역적 특성도 감안되어야 할 것이다.

• Composites Research
• /
• 제26권6호
• /
• pp.355-362
• /
• 2013

복합재료 중 가장 많이 사용되는 탄소계 나노복합재의 성능 향상에 대한 연구가 수행되었다. 나노 사이즈의 탄소나노튜브(CNT)와 마이크로 사이즈의 그레파이트(Graphite) 입자를 일정한 형태로 배열하여 나노복합재를 제작하였다. 입자를 배열하기 위하여 전기장을 활용하였다. 일정한 방향 혹은 형태로 배열된 입자는 에폭시 기지 속에서 섬유강화 복합재 처럼 일정한 방향으로 강성의 향상을 나타낸다. 복합재의 구조적 강성이나 물리적 특성은 강화 입자의 배열상태에 따라 매우 달라지게 된다. 본 연구에서는 특히 탄소나노튜브와 그레파이트 강화입자의 전기장 배열에 의해서 만들어진 나노복합재의 강성 및 방사능 차폐특성을 규명하였다. 전기장에 의한 입자의 배열로 만들어진 탄소계 복합재는 구조적 성능뿐만 아니라 물리적인 방사능 차폐에서도 훌륭한 특성을 나타내었다.

• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.460-466
• /
• 2013

4 mol% Yttria-stabilized zirconia (4YSZ) coatings with $200{\mu}m$ thick are fabricated by Electron Beam Physical Vapor Deposition (EB-PVD) for thermal barrier coating (TBC). $150{\mu}m$ of NiCrAlY based bond coat is prepared by conventional APS (Air Plasma Spray) method on the NiCrCoAl alloy substrate before deposition of top coating. 4 mol% YSZ top coating shows typical tetragonal phase and columnar structure due to vapor phase deposition process. The adhesion strength of coating is measured about 40 MPa. There is no delamination or cracking of coatings after thermal cyclic fatigue and shock test at $850^{\circ}C$.

• 한국BIM학회 논문집
• /
• 제11권4호
• /
• pp.31-41
• /
• 2021

Digital twins between "BIM Digital Model-Physical Prototype Model" will be built for Noise Barrier tunnel(NBT) that meet the definition of N.G smart city facilities derived from previous studies to build a data flow that connects data at each stage of design, construction, and operation. In this process, BIM design automation tools are created and utilized, and consistent transmission of member and attribute data is performed by converting them into IFC format. Through this, the purpose is to improve the labor-intensive environment required from the design stage of the NBT and to consistently maintain the information required for subsequent production and construction. This includes achieving changes in the construction industry based on digital transformation by unifying various data formats used differently for each industry from design to operation. In addition, it demonstrates that information exchange in the maintenance and management stages is possible based on the data exchange of the established digital twin and aims to improve the existing labor-intensive environment and expand operability between digital and physical information. As suggested in previous studies, the implementation of digital twins in these N.G smart city facilities includes the possibility of building an environment that adds to the possibility of high value-added product platforms as well as the function of big data platforms targeting existing smart cities.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.239-240
• /
• 2008

As semiconductor devices are scaled down for better performance and more functionality, the Cu-based interconnects suffer from the increase of the resistivity of the Cu wires. The resistivity increase, which is attributed to the electron scattering from grain boundaries and interfaces, needs to be addressed in order to further scale down semiconductor devices [1]. The increase in the resistivity of the interconnect can be alleviated by increasing the grain size of electroplating (EP)-Cu or by modifying the Cu surface [1]. Another possible solution is to maximize the portion of the EP-Cu volume in the vias or damascene structures with the conformal diffusion barrier and seed layer by optimizing their deposition processes during Cu interconnect fabrication, which are currently ionized physical vapor deposition (IPVD)-based Ta/TaN bilayer and IPVD-Cu, respectively. The use of in-situ etching, during IPVD of the barrier or the seed layer, has been effective in enlarging the trench volume where the Cu is filled, resulting in improved reliability and performance of the Cu-based interconnect. However, the application of IPVD technology is expected to be limited eventually because of poor sidewall step coverage and the narrow top part of the damascene structures. Recently, Ru has been suggested as a diffusion barrier that is compatible with the direct plating of Cu [2-3]. A single-layer diffusion barrier for the direct plating of Cu is desirable to optimize the resistance of the Cu interconnects because it eliminates the Cu-seed layer. However, previous studies have shown that the Ru by itself is not a suitable diffusion barrier for Cu metallization [4-6]. Thus, the diffusion barrier performance of the Ru film should be improved in order for it to be successfully incorporated as a seed layer/barrier layer for the direct plating of Cu. The improvement of its barrier performance, by modifying the Ru microstructure from columnar to amorphous (by incorporating the N into Ru during PVD), has been previously reported [7]. Another approach for improving the barrier performance of the Ru film is to use Ru as a just seed layer and combine it with superior materials to function as a diffusion barrier against the Cu. A RulTaN bilayer prepared by PVD has recently been suggested as a seed layer/diffusion barrier for Cu. This bilayer was stable between the Cu and Si after annealing at $700^{\circ}C$ for I min [8]. Although these reports dealt with the possible applications of Ru for Cu metallization, cases where the Ru film was prepared by atomic layer deposition (ALD) have not been identified. These are important because of ALD's excellent conformality. In this study, a bilayer diffusion barrier of Ru/TaCN prepared by ALD was investigated. As the addition of the third element into the transition metal nitride disrupts the crystal lattice and leads to the formation of a stable ternary amorphous material, as indicated by Nicolet [9], ALD-TaCN is expected to improve the diffusion barrier performance of the ALD-Ru against Cu. Ru was deposited by a sequential supply of bis(ethylcyclopentadienyl)ruthenium [Ru$(EtCp)_2$] and $NH_3$plasma and TaCN by a sequential supply of $(NEt_2)_3Ta=Nbu^t$ (tert-butylimido-trisdiethylamido-tantalum, TBTDET) and $H_2$ plasma. Sheet resistance measurements, X-ray diffractometry (XRD), and Auger electron spectroscopy (AES) analysis showed that the bilayer diffusion barriers of ALD-Ru (12 nm)/ALD-TaCN (2 nm) and ALD-Ru (4nm)/ALD-TaCN (2 nm) prevented the Cu diffusion up to annealing temperatures of 600 and $550^{\circ}C$ for 30 min, respectively. This is found to be due to the excellent diffusion barrier performance of the ALD-TaCN film against the Cu, due to it having an amorphous structure. A 5-nm-thick ALD-TaCN film was even stable up to annealing at $650^{\circ}C$ between Cu and Si. Transmission electron microscopy (TEM) investigation combined with energy dispersive spectroscopy (EDS) analysis revealed that the ALD-Ru/ALD-TaCN diffusion barrier failed by the Cu diffusion through the bilayer into the Si substrate. This is due to the ALD-TaCN interlayer preventing the interfacial reaction between the Ru and Si.

• 한국농촌건축학회논문집
• /
• 제16권3호
• /
• pp.45-52
• /
• 2014

Recently, Korean people are more interested in leisure time as the Korean economy has enjoyed the economic growth on a continual basis. Along with it, the disabled people's demand for enjoying the beach is growing. To meet the disabled people's demand for enjoy the beaches, it is important to prepare the convenient facilities where the disabled people in the wheel chair can use comfortably, including the handicapped parking area, toilet for the disabled, shower stall room and am bathhouse. On the backdrop of this, the study has been made on the obstacles which keep the disabled people from using the convenient facilities installed on 12 beaches in the southern coat of Korea from the perspective of barrier free design. This study showed that half of the beaches in question did not have the handicapped parking places. The parking space was also so narrow that it was difficult for handicapped people to access the parking lot with their vehicles. There were also 3 beaches which did not have the toilet for the disabled. Even the beaches which have the toilet for the disabled, the size of entrance door and floor space was so narrow and there were a lot of physical obstacles such as no handles for the disabled people that it was really hard for the disabled people in wheelchair to use them.

• 한국표면공학회지
• /
• 제54권6호
• /
• pp.331-339
• /
• 2021

Environmental barrier coatings(EBCs) are applied to the SiC/SiC ceramic matrix composites(CMCs) in order to protect CMCs from being corroded with water vapor by combustion gas in gas turbine engines. Ytterbium silicates, such as ytterbium monosilicate and ytterbium disilicate, are ones of the candidate materials for EBCs due to their excellent resistance to water vapor corrosion as well as thermal-expansion match with SiC. In this study, ytterbium silicates are fabricated with 2-step solid-state synthesis targeting ytterbium disilicate. After synthesizing ytterbium monosilicate, the mixtures of ytterbium monosilicate and SiO₂ are heat-treated and densified by using pressureless sintering or hot pressing with a variety of heating conditions. The phase formation, thermal expansion, and oxidation behavior are examined with fabricated specimens. The final densified bodies are found to be composites between ytterbium monosilicate and ytterbium disilicate with different ratios, which results in 4.43 to 6.72×10^-6/K range of coefficients of thermal expansion. The probability of these ytterbium silicates for EBC applications is also discussed.