• Journal of the Korea Furniture Society
• /
• v.11 no.1
• /
• pp.69-74
• /
• 2000

Pinus $rigida{\times}taeda$ and Liriodendron tulipifira have been planted in this country for about 20 years. They are known as a relatively 13st-grown and useful species. The physical properties such as green moisture contents, specific gravities and dimensional shrinkages were examined with natively grown timbers. The kiln-dry schedules were developed with 30m thick boards by using an oven-fast-drying method. In both species the green MC's of sapwoods were higher than those of heartwoods, but their discrepancies were small. The green specific gravities of Pinus $rigida{\times}taeda$ and Liriodendron tulipifera were 0.48 and 0.41~O.42, respectively. The developed kiln-dry schedules were proven to minimize drying defects for the hoards of 30mm thickness and various width.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.3
• /
• pp.83-90
• /
• 2004

Pulp mold is one of the famous environmental friendly materials, which made from re cycled materials such as old newsprints through the environmental friendly processes. Furthermore, the used pulp mold can be easily recycled and the pulp mold itself is biodegradable. However, the higher cost and some deficiency in physical properties of pulp mold have been considered as issues to be overcome for a substitute for polymeric packaging materials such as EPS (Expandable Polystyrene). The way for the optimization of a pulp mold mill was proposed in this report. The possible reduction of drying energy was calculated by using a computer simulation method, which could Provide the detailed information about mass balance of overall process. The simulated results showed a great possible curtailment of production cost by improving the forming systems, for example, increasing the temperature and the dryness of a wet pulp mold.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.103-107
• /
• 1995

The intention of this study is to reduce the drying shrinkage of the cement mortar using the shrinkage reducing agent and the inorganic admixture. In this experiment the drying shrinkage strain, rate of weight loss and strength have been measured depending on age using the motar specimen. The result show that the usage of shrinkage reducing agent up to 1.5% will give an effect of approximately 30% without loss of strength, and the efficiency will increase together with the inorganic admixture. Also, as the amount of shrinkage reducing agent increases, the rate of weight loss increases. Drying shrinkage reduces at the same rate of weight loss.

• Korean Journal of Food Science and Technology
• /
• v.24 no.5
• /
• pp.414-422
• /
• 1992

To keep up with urgent need of continuous, effective and rapid drying unit, a fluidized bed drying system with computer controlling air temperature, velocity and relative humidity was designed. This study was attempted to determine physical properties and some basic experiments of fluidized bed d교ing of barley. Also experimental data of the designed fluidized bed drying system using the barely were compared with those of published equations to confirm the reliability of the system and the following results were obtained. The physical dimension husked barley were shown larger than that of naked barley from the experiment. When air temperature. relative humidity and charged amount were $35^{\circ}C$, 30% and 300g respectively, the minimum fluidization velocity of naked and husked barley were found 1.5 m/s and 1.7 m/s. And the optimum fluidization velocity was shown as 3.0 m/s from the experiment. The empirical equation of $U_{mf}$ in this fluidized system was obtained as follow; $U_{mf}^2= \frac{{\phi_s}\;d_p}{Hk}\;{\cdot}\;\frac{(\rho_s-\rho_g)g\;{{\varepsilon}_{mf}^3}} {\rho_g}(Re_p>1,000)$ Where HK=0.4881 for naked barley, 0.6649 for husked barley.

• Journal of Life Science
• /
• v.10 no.3
• /
• pp.229-235
• /
• 2000

The absorption characteristics of Korean yam powder according to different drying methods were investigated. The physical properties of yam powder by different drying methods were showed the biggest porosity in freeze drying sample, while the smallest in hot air drying sample. No difference was founded in proximate compositions of yam powder by various drying methods. The amount of total phenolic compound and Vit C were showed the bigger decrement in freeze dried sample than other drying methods. The time reaching to equilibrium moisture content were determined in 12 days. Monolayer moisture contents were predicted to 0.0508∼0.0588 by BET equation and 0.0705∼0.0811 g H2O/g solid by GAB equation. BET equation for isothermal absorption curve showed over 0.95 R-square for every drying methods. GAB equation showed over 0.99 in vacuum and freeze drying but a poor R-square in hot air drying.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.292-301
• /
• 1997

In drying process, to minimize the quality degradation by improved drying process and pretreatment methods, carrots, cabbages and radishes were dried and rehydrated. Physico-chemical properties of product were analyzed to determine the optimum pretreatment method and drying models were applied to explain drying mechanisms. Microwave, steam and water were used prior to drying as blanching method. In consideration of physical properties, optimum treatment time was decided that microwave was 1 min, steam and water were each 10 min. Control, steam, water, microwave and osmotic dehydration were treated prior to drying as pretreatment individually, osmotic dehydration was lower than the other treatmemt in drying efficiency, but carotene content was higher than the others. The effect continued after rehydration. Ten panelists tested dried and rehydrated carrots. After rehydration, the quality of air dried product with osmotic dehydration was superior to freeze dried without treatment. The fittness of drying models were conducted in order to explain the mechanism of drying each process. Quadratic model was most fittable to explain during drying. However, in rehydration process, no fittable model was found.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.925-928
• /
• 2000

In this paper, physical properties of cement mortar for floor using expansion agent are discussed varied with mixing time and curing temperature, delivery time and content of added water for preventing fluidity loss. According to experimental results, slump loss shows high with elapse of time And as curing temperature goes up, it also show high when curing temperature goes up and time lag between mixing and casting increases. As curing temperature goes down, drying shrinkage shows to be decreased. But it shows decline tendency with increase of added water content.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.164-165
• /
• 2021

To prepare the good-adherent and weather-resistant acrylic resin coatings, acrylic resin was prepared by a radical polymerization. Glass transition temperature(Tg) of the acrylic copolymer was fixed at 30℃ and the contents of tertiary amine monomer(DMAEMA) was varied to be 5, 10, 15, 20 wt% respectively. γ-Glycidoxypropyltrimethoxysilane(GPTMS) containing epoxy group was used for curing agents and di-n-butyltindilaurate(DBTDL) was used for drying accelerator. The equivalent ratio of amine to epoxy was 1:1. The prepared coatings exhibited excellent adhesion to various substrates, and various physical properties of the coatings were satisfactory. The gloss retention and color difference were improved at low tertiary amine concentration. The coatings containing 10wt% tertiary amine concentration have especially good weather resistant properties.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.12 no.1
• /
• pp.145-157
• /
• 1994

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printability of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular \veight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.369-372
• /
• 2005

This study is about physical properties of concrete with changing displacement ratio of calcium sulfa aluminates(CSA) type admixture. Firstly, test shows that as displacement ratio of CSA increases and setting properties changes, fluidity and air contents decreases. In water to binder ratio 35$\%$ and 45$\%$, concrete using the cement replacing CSA 4$\%$ by volume shows that bleeding decreases 94.7$\%$ and 74.3$\%$ respectively, compared with plain concrete. In addition, setting time was promoted around 3 to 6 hour and 1 to 4 hour respectively. For harden concrete, increase of displacement ratio caused tendency of higher compressive strength as OPC has at early age. Replacing higher CSA admixture led to reduce of drying shrinkage.