• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1063-1071
• /
• 2023

Unmanned aerial vehicles (UAVs, drones) are becoming increasingly useful in a variety of fields. Advances in UAV and camera technology have made it possible to equip them with ultra-high resolution sensors and capture images at low altitudes, which has improved the reliability and classification accuracy of object identification on the ground. The distinctive contribution of this study is the derivation of sensor-specific performance metrics (GRD/GSD), which shows that as the GSD increases with altitude, the GRD value also increases. In this study, we identified the characteristics of various onboard sensors and analysed the image quality (discrimination resolution) of aerial photography results using UAVs, and calculated the shooting conditions to obtain the discrimination resolution required for reading ground objects.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.1
• /
• pp.129-134
• /
• 2010

Low-carbon Green Growth is highlighted as the main political issue from in and outof Korea. Recently Korean government announced the vision for low-carbon green growth. Considering this as a starting point the carbon emission estimation has become an important factor in the city planning. In order to realize the carbon reduction planning, this research was focused on the trend analyzes between the carbon exhaust estimation as well as the land use change for the past 40 years in Jinju. The image processing data of past aerial photography and the land suitability assessment databases were used to collect the useful information's for the land trend analysis for 40 years. As the results, the land use changes by new residential developments have led to increase the carbon emissions and population concentration rapidly. The urban management planning for low carbon and green growth should consider carbon emissions by population growth derived from land use change. Further research need to estimate the accurate carbon exhaust using relationship model with fuel consumption, carbon estimation, and land use.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.543-551
• /
• 2006

Recently efforts to extract information about forests by using remote sensing techniques for efficient forest management have progressed actively. In terms of extraction of tree information using single remote sensing data, however, the accuracy of tree recognition and the quantity of extracted information is limited. The objective of this study is to carry out tree modeling in domestic environment applying the latest core technique for tree modeling using color aerial photographs and LiDAR data and to estimate the result of tree modeling. A small-scale coniferous forest was investigated in Daejeon. It was 0.77 that the $R^2$ of accuracy test of tree numbers that estimated with color aerial photography and LiDAR data. In terms of tree height, there was no difference between the estimated value and the field measurements in the case of the group accuracy test of the recently unchanged area. Moreover $R^2$ was 0.83 in the case of the individual accuracy test.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.171-180
• /
• 1993

Concern about nonpoint source pollution associated with urban storm water has led to the development of new tools for better water quality planning. This paper presents an application of a geographic information system (GIS) for urban water quality study. The GIS was used to manage land use data for nonpoint source pollution modeling and to aggregate pollutant loadings within various types of geographic units. An empirical water quality model was used to estimate pollutant loadings based primarily on land use. A land use coverage was created by updating an old coverage through interpretation of recent photography. This land use coverage was also used to record all pollutant loadings for each land use polygon. Storm sewer maps were digitized and interpreted to create a coverage of storm sewer basins and sub-basins. By overlaying pollutant loadings with the sewer sub-basin layer, aggregated pollutant loadings for major sewer outfalls were calculated. Based on the loading information, critical areas of excessive pollutant loadings were located and the effectiveness of Best Management Practices (BMPs) to control pollutant loadings were evaluated.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.608-616
• /
• 2021

Purpose: Safety inspections by existing personnel have been limited in evaluation and data securing due to concerns about the safety of technicians or difficulty in accessing them, and are becoming a bigger problem as the number of maintenance targets increases due to the aging of facilities. As drone technology develops, it is possible to ensure the safety of personnel, secure visual data, and diagnose quickly, and use it is increasing as safety inspection of facilities by drones was introduced recently. In order to further enhance utilization, it is considered necessary to base a consideration standard for facility appearance investigation by drones, and in this paper, research was conducted on dams. Method: To calculate the quality, existing domestic safety inspection and drone-related consideration standards were investigated, and procedures related to safety inspection using drones were compared and analyzed to review work procedures and construction types. In addition, empirical data were collected through drone photography and elevation image production for the actual dam. Result: Work types for safety inspection of facilities using drones were derived, and empirical survey results were collected for two dams according to work types. The existing guidelines were applied for the adjustment ratios for each structural type and standard of the facility, and if a meteorological reference point survey was necessary, the unmanned aerial vehicle survey of the construction work standard was applied. Conclusion: The finer the GSD in appearance investigation using drones, the greater the number of photographs taken, and the concept of adjustment cost was applied as a correction to calculate the consideration standard. In addition, it was found that the problem of maximum GSD indicating limitations should be considered in order to maintain the safe distance.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.136-150
• /
• 2022

In this study, a comparative review was conducted on how to use RGB images to obtain river topographic information, which is one of the most essential data for eco-friendly river management and flood level analysis. In terms of the topographic information of river zone, to obtain the topographic information of flow section is one of the difficult topic, therefore, this study focused on estimating the river topographic information of flow section through RGB images. For this study, the river topography surveying was directly conducted using ADCP and RTK-GPS, and at the same time, and orthomosiac image were created using high-resolution images obtained by drone photography. And then, the existing developed regression equations were applied to the result of channel topography surveying by ADCP and the band values of the RGB images, and the channel bathymetry in the study area was estimated using the regression equation that showed the best predictability. In addition, CCHE2D flow modeling was simulated to perform comparative verification of the topographical informations. The modeling result with the image-based topographical information provided better water depth and current velocity simulation results, when it compared to the directly measured topographical information for which measurement of the sub-section was not performed. It is concluded that river topographic information could be obtained from RGB images, and if additional research was conducted, it could be used as a method of obtaining efficient river topographic information for river management.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.1
• /
• pp.19-28
• /
• 2007

Tunnel management is a time-consuming and expensive task. In particular, visual analysis of tunnel inspection often requires extended time and cost and shows problems on data gathering, storage and analysis. This study proposes a new approach to extract information for tunnel management by using a laser scanning technology. A prototype tunnel laser scanner developed was used to obtain point clouds of a railway tunnel surface. Initial processing of laser scanning data was to separate those laser pulses returned from the installations attached to tunnel liner using radiometric and geometric characteristics of laser returns. Once the laser returns from the installations were separated and removed, physically damaged parts on tunnel lining are detected. Based on the plane formed by laser scanner data, damaged parts are detected by analysis of proximity. The algorithms presented in this study successfully detect the physically damaged parts which can be verified by the digital photography of the corresponding location on the tunnel surface.

• Journal of Korean Society of Rural Planning
• /
• v.10 no.2 s.23
• /
• pp.35-42
• /
• 2004

This study aimed at establishing the multi-ranged approach on data acquisition technique for rural landscape planning, which tried categorization, grading and transferring of landscape elements in the more detailed level. For the systematic management of database for the topographic informations in the village level, a kind of the aerial photographing techniques with UAV(Unmanned Aerial Vehicle) was used and its resultant data for the landscape simulation of the rural village, which in turn helped the convenient approach to understanding of its comprehensive spatial structure. The image data from aerial photography was systematically processed through; First, after revision of the distorted one, the image map was adjusted with the topographical and cadastral maps. Second, the farm houses and buildings, and other facilities difficult to find out in the topographical map was digitally read from the adjusted image. The topographical landscape view of rural village was simulated on the base of DEM(Digital Elevation Model) and the 3-dimensional shapes of farm houses and buildings were automatically modelled using the input system developed by the author. In conclusion, the aerial image information adjusted with the edited maps could give more intuitive and detailed villagescape than the ordinary one and through landscape simulation of the rural village, its topography, features of houses/buildings and spatial distribution of land uses were effectively reproduced. And, by the linkage between field survey and photographed/simulated results of the typical landscape elements using hyper-link method, it would be expected to develop as an effective visualization technique of rural landscape.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.455-461
• /
• 2018

This study empirically examines the differences in advertising-related memory and product-related memory effects and ad attitudes between art infusion(interactive/ print advertising) and reguratory focus (promotion focus / prevention focus). Two - way MANOVA analysis was used for the factor analysis. The advertising experiment for renowned artists manipulated the 'self portrait' of 'Vincent Van Gogh'. The results of this study are as follows: First, promotion - focused consumers remember interactive advertising more than advertising printed advertisements in advertisements for advertising on publicity. Second, the consumers who focus on preventive focus tend to recall the information related to the product rather than the interactive advertisement.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.2
• /
• pp.65-80
• /
• 2020

This paper deals with risk assessment of life in a landslide-prone area by a GIS-based modeling method. Landslide susceptibility maps can provide a probability of landslide prone areas to mitigate or proper control this problems and to take any development plan and disaster management. A landslide inventory map of the study area was prepared based on past historical information and aerial photography analysis. A total of 550 landslides have been counted at the whole study area. The extracted landslides were randomly selected and divided into two different groups, 50% of the landslides were used for model calibration and the other were used for validation purpose. Eleven causative factors (continuous and thematic) such as slope, aspect, curvature, topographic wetness index, elevation, forest type, forest crown density, geology, land-use, soil drainage, and soil texture were used in hazard analysis. The correlation between landslides and these factors, pixels were divided into several classes and frequency ratio was also extracted. Eventually, a landslide susceptibility map was constructed using a logistic regression model based on entire events. Moreover, the landslide susceptibility map was plotted with a receiver operating characteristic (ROC) curve and calculated the area under the curve (AUC) and tried to extract a success rate curve. Based on the results, logistic regression produced an 85.18% accuracy, so we believed that the model was reliable and acceptable for the landslide susceptibility analysis on the study area. In addition, for risk assessment, vulnerability scale were added for social thematic data layer. The study area predictive landslide affected pixels 2,000 and 5,000 were also calculated for making a probability table. In final calculation, the 2,000 predictive landslide affected pixels were assumed to run. The total population causalities were estimated as 7.75 person that was relatively close to the actual number published in Korean Annual Disaster Report, 2006.