• 한국세라믹학회지
• /
• 제47권5호
• /
• pp.433-438
• /
• 2010

Fe-carbon/$TiO_2$ composites were prepared by a sol-gel method using AC, ACF, CNT and $C_{60}$ as carbon precursors and were characterized by means of BET surface area, X-ray diffraction (XRD), scanning electron microscopy (SEM), Transmission Electron Microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). The activity of the prepared photocatalysts was investigated by degradation reaction of methylene blue (MB) irradiated with UV lamp. Effects of different carbon sources and irradiation time on photocatalytic activity were also investigated. The results showed that the photocatalytic activity of the Fe-carbon/$TiO_2$ composites was much higher than that of pristine $TiO_2$ and Fe/$TiO_2$ composites. The prominent photocatalytic activity of Fecarbon/$TiO_2$ composites could be attributed to both the effects of photo-adsorption and electron transfer by carbon substrate. In addition, the higher photocatalytic activity of Fe-carbon/$TiO_2$ composites can be compared with that of carbon/$TiO_2$ and Fe /$TiO_2$ composites due to cooperative effects between Fe and carbon.

• 펄프종이기술
• /
• 제40권5호
• /
• pp.53-59
• /
• 2008

This study was carried out to investigate the effect of photocatalysis using $TiO_2$ and UV applied for the COD reduction of wastewater in linerboard mill. Trials were done to obtain the optimum addition amounts of $TiO_2$ and $H_2O_2$ to the wastewater and find an appropriate pH condition for photocatalysis on $TiO_2$ for degrading COD. The photocatalytic reaction was applied to the wastewater collected after secondary activated sludge treatment in WWTP of linerboard mill. The optimum application of photocatalysis reaction was obtained under the addition conditions of 2 g/L of $TiO_2$ and 200 mg/L of $H_2O_2$ at pH 3.0, respectively. The removal efficiency of $SCOD_{Cr}$ by photocatalytic treatment was 86.4 % and higher than Fenton treatment in which removal efficiency was 67.4 %. It was concluded that the photocatalytic process using $TiO_2$ and UV could be applied to the wastewater treatment in linerboard mill and also to the dramatic drop-off in NBDCOD load from wastewater of tertiary treatment in WWTP.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.95-99
• /
• 2011

$CaTi_{1-x}Fe_xO_3(0{\leq}x{\leq}0.4)$ solid solution photocatalysts were synthesized by iron doping during the conventional solid state reaction at $1100^{\circ}C$ for 5 h and characterized by ultraviolet-visible (UV-vis) absorption spectroscopy, X-ray diffraction, morphological analysis. We found that $CaTi_{1-x}Fe_xO_3$ samples not only absorb UV but also the visible light photons. This is because the Fe substitution at Ti-site in $CaTi_{1-x}Fe_xO_3$ lattice induces the band transition from Fe3d to the Fe3d + Ti3d hybrid orbital. The photocatalytic activity of Fe doped $CaTiO_3$ samples for hydrogen production under UV light irradiation decreased with the increase in the Fe concentration. There exists an optimized concentration of iron in $CaTiO_3$, which yields a maximum photocatalytic activity under visible light ($\lambda\geq420nm$) photons.

• 한국세라믹학회지
• /
• 제45권1호
• /
• pp.43-47
• /
• 2008

The photocatalyst of $TiO_2$ coated on a fly ash composites (TCF) was prepared from precipitant dropping method to remove the acetaldehyde by photocatalytic reaction. The TCF were characterized by crystal aize, crystal structure and specific surface area. The photodegradation of acetaldehyde has been investigated using a UV-illuminated fixed photocatalytic reactor with TCF catalyst and P-25 catalyst in gas phase. The effect of photodegradation reaction conditions, such as initial concentration of acetaldehyde, concentration of oxidant in mixed gas and the light intensity on the photodegradation of acetaldehyde were investigated. P-25 catalyst showed the highest photodegradation of acetaldehyde and anatase $TiO_2$ coated TCF showed higher decomposition rate than rutile coated TCF. The photodegradation rate of acetaldehyde increased with the decrease of flow rate, initial concentration of acetaldehyde ($C_i$) and water vapor, however, it was increased with the increas of UV light intensity. The optimum conditions were weight of TCF=10 g, flow rate=50 ml/min $C_i$=100 ppm, concentration of oxygen=20%, concentration of water vapor=100 ppm.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 총회 및 춘계학술발표회
• /
• pp.358-361
• /
• 2004

The photocatalytic degradation of Endocrine Discruptors, dibuthyl phthalate(DBP) has been investigated over TiO$_2$ photocatalysts irradiated with a ultraviolet (UV) light. The effect of operational parameters, i.e., reaction time, light intensity, pH and additive on the degradation rate of aqueous solution of Endocrine Discruptors has been examined. Results show that the employment of efficient photocatalysts and the selection of optimal operational parameters may lead to degradation of Endocrine Discruptors solutions.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1063-1068
• /
• 2008

화학기상증착법으로 제조된 $TiO_2$ 광촉매 볼을 이용하여 마이크로웨이브와 자외선을 동시에 조사시켜 메틸렌블루 수용액의 광촉매 분해실험을 하였다. 광촉매반응에 마이크로웨이브와 자외선을 같이 사용하기 위하여 마이크로웨이브에 의해 방전되는 무전극자외선램프를 개발하였다. 실험결과 마이크로웨이브의 강도, 반응수용액의 순환유속 그리고 산화보조제의 첨가량이 증가할수록 광촉매분해속도가 증가하였다. 특히 과산화수소를 첨가한 광촉매반응에 마이크로웨이브를 부가한 실험의 반응속도상수는 $0.0197min^{-1}$이고 광촉매반응에 과산화수소만을 첨가한 경우의 속도상수는 $0.0061min^{-1}$로 약 3배정도 높은 값을 나타내었다. 본 연구의 결과로부터 광촉매반응에 마이크로웨이브가 미치는 영향을 정량적으로 평가하기는 어렵지만, 과산화수소가 첨가되는 광촉매반응에 마이크로웨이브의 조사가 매우 중요한 인자인 것을 알 수 있었다.

• Ecology and Resilient Infrastructure
• /
• 제2권4호
• /
• pp.330-336
• /
• 2015

본 논문은 수용액에서 $TiO_2$ 나노입자 (Degussa P25) 광촉매 반응에 의한 비스페놀 A (BPA)의 분해 제거를 연구하였다. 3시간의 광촉매 반응 (자외선 파장 = 365 nm, 자외선 강도 = $3mW\;cm^{-2}$, $TiO_2$ 농도 = $2.0g\;L^{-1}$)에 의하여 98%의 BPA ($1.0{\times}10^{-5}M$)와 89%의 총유기탄소가 제거되었다. 그리고 광분해, 가수분해와 흡착반응에 의한 BPA의 분해 제거는 각각 2%, 5%와 13%로 나타났다. 광촉매 반응에 의한 BPA의 분해 제거는 수산화 라디칼의 소광제인 메탄올의 농도가 증가 할수록 감소하였다. 이것은 BPA와 수산화 라디칼의 반응이 BPA 분해 제거의 주요한 기작이라는 것을 나타낸다. 이 반응의 초기 유사 1차 속도 상수는 $7.94{\times}10^{-4}min^{-1}$로 계산되었으며, BPA 90%를 분해 제거하는 시간은 25분으로 나타났다. 그리고 광촉매 반응에 의한 BPA의 독성 저감을 평가하기 위하여 물벼룩 (Daphnia magna, 생후 24시간 미만)을 이용한 급성독성 시험을 실시하였다. 물벼룩에 대한 BPA의 급성독성 (48시간)은 초기 2.93 TU (독성 단위)였으며, 3시간의 광촉매 반응 후에는 무독성으로 나타났다. 이것은 BPA의 광촉매 반응에서 독성 분해산물이 생성되지 않는 다는 것을 제시한다.

• 분석과학
• /
• 제9권1호
• /
• pp.62-71
• /
• 1996

광전기화학쎌을 사용하여 염료 감응법으로 태양에너지의 전기적 에너지 전환효율을 극대화하고자 하였다. 초감응제 thiourea를 포함하는 rose bengal 감응 광전류의 크기는 thiourea가 존재할 경우 5배 이상이었으나 장시간에 걸친 광조사는 전류를 감소시켰다. 광조사 전후 염료 용액의 변화를 분광학적으로 조사한 결과 광촉매작용에 의하여 용액 중에서 염료가 광표백되고 불용성의 침전이 형성되어 그 결과 용액으로부터 염료가 사라져 광전류가 감소하는 것을 확인하게 되었다.

• Journal of Photoscience
• /
• 제1권2호
• /
• pp.107-111
• /
• 1994

Photocatalytic ($\lambda$$_{ex}$ > 300 nm) reaction at room temperature by platinized titanium (IV) oxide particles produced 1-methyl-1, 2, 3, 4-tetrahydroisoquinolines (MIQ's) from phenethylamines in aqueous ethanol suspension under deaerated atmosphere. Among the phenethylamines, dopamine (2-(3, 4-dihydroxyphenyl) ethylamine) showed the highest reactivity to give MIQ almost selectively under the neutralized conditions. The other phenethylamines gave predominantly N-alkylated and N, N-dialkylated products in the methanol or ethanol solutions. The reaction mechanism includes a Schiff base intermediate to undergo either nucleophilic attack leading to MIQ or reduction to N-alkylated products.

• 한국표면공학회지
• /
• 제32권3호
• /
• pp.336-339
• /
• 1999

Photo-excited $TiO_2$ surface has a strong ability to induce various chemical reactions. Our study concentrates mainly on the utilisation of light energy to induce reactive radicals for environmental protection application. For instance, we have successfully used TiO$_2$ to break down foul smelling substances in air. In order to retain and separate the $TiO_2$ catalyst from the reactants and products, $TiO_2$ was immobilised by fixing onto various substrates. $TiO_2$ catalyst coated onto glass, wall paper and painted panel was found to show significant deodorising effect. The deodorising effect continues as long as$TiO_2$ is exposed to light irradiation.