• 한국수소및신에너지학회논문집
• /
• 제21권4호
• /
• pp.301-306
• /
• 2010

The present work is performed to photocatalytically reduce Cr(VI) by means of metal deposited anodized $TiO_2$ tubes, which are prepared by anodization of Ti foil followed by metal deposition. Stably immobilized photo-reactive materials are favored in the field of detoxification in a conventional aqueous medium, preventing gradual loss of efficiency and process malfunction due to detachment of the materials. The prepared samples are characterized by SEM, TEM, EDAX, and photocurrent. The metal deposited-$TiO_2$ electrode shows higher efficiency for Cr(VI) reduction (ca. 20%) and higher ability for adsorption (4~5 times) than pure one.

• Rapid Communication in Photoscience
• /
• 제3권2호
• /
• pp.35-37
• /
• 2014

PEC (photoelectrochemical) water splitting for $O_2/H_2$ production is one of the promising but difficult way to utilize solar energy. Among photocatalytic materials for PEC water oxidation, $BiVO_4$ (Eg = 2.4 eV) has been recently intensively studied since it has various advantageous properties. But its maximum efficiency has not been realized owing to kinetic factors - slow water oxidation at surface & insufficient stability. These problems can be simultaneously solved by application of oxygen evolution catalyst (OEC) such as $CoO_x$, Co-Pi, $IrO_x$ etc. Herein we report the first successful application of $NiFeO_x$ OEC on $BiVO_4$, showing good performance compared to other effective OEC applied on $BiVO_4$ under basic conditions. The enhanced activity of OEC loaded $BiVO_4$ has been supported by the surface charge separation efficiency and electrochemical impedance studies.

• 한국수소및신에너지학회논문집
• /
• 제1권1호
• /
• pp.48-54
• /
• 1989

Semiconductive property of the passivating $TiO_2$ film was investigated by measuring the impedance of passivated titanium electrode in a 0.1 N NaOH solution. The passive film was prepared galvanostatically with $10mA/cm^2$ at formation potential of 50 V in a 1 N $H_2SO_4$ solution. The impedance measurement was conducted by superimposing an ac voltage of 5 m V amplitude with the frequency ranging from 5 to 10000 Hz on a dc bias (applied potential). The donor distribution in the film was depicted from the analysis of the non-linear slope of Mott-Schottky plot. The region with nearly constant concentration of donors near the electrolyte/film interface amounts at about 60 percent of the total film thickness and donor concentration increases largely with distance from the surface in an inner region near the film/metal interface. In a region of the film/metal interface the donor concentration showed a frequency dependence greater than in a region of the electrolyte/film interface. The result of donor concentration against frequency suggests a transition from crystalline to amorphous state with distance from the electrolyte/film interface in the passivating $TiO_2$ films. This is also confirmed by the ac conductivity measurement.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.329-334
• /
• 2016

Hydrogen is eco-friendly alternative energy source and the photoelectrochemical water splitting is believed to be one of the promising methods for hydrogen production. Many researchers have studied several potential photocatalysts to increase the photoelectochemical performance efficiency for hydrogen conversion. In this study, the GO (graphene oxide) was prepared by Tour's method and was dispersed in precursor solutions of $WO_3$ and $BiVO_4$. Those precursor solutions were spin-coated on FTO glass and several photocatalyst thin films of $WO_3$, $BiVO_4$ and $WO_3/BiVO_4$ were prepared by calcination. The morphologies of prepared photocatalyst thin films were measured by scanning electron microscope. The photoelectrochemical performances of photocatalyst thin films with rGO (reduced graphene oxide) and without rGO were analyzed systematically.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.222-225
• /
• 2009

In this paper, $TiO_2$ nanotube is prepared and the preparation is influenced by electrochemical etching rate and chemical dissolution rate. Especially, the chemical dissolution rate is lowered as the length $TiO_2$ nanotube increases. Titanium foil were anodized at various bias or current such as 20V, 55V and 0.1A (bath temperature $25^{\circ}C$) in organic electrolytes (ethylene glycol, glycerol) and then annealed at $450^{\circ}C$ and $650^{\circ}C$ to obtain the crystallized tubular $TiO_2$ on the Ti foil. Higher efficiency (89.1%) for the Cr(VI) reduction was obtained with the prepared sample compared to that (20.9%) with the sample in 0.5% HF electrolyte earlier studied.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.378-378
• /
• 2011

본 연구에서는 ZnO 나노선 기판을 제작하여 그 위에 밴드갭이 낮은 물질인 CdS, CdSe를 증착시킨 후 p-type 반도체 물질인 CuSCN을 증착시켜 안정성이 향상된 양자점 감응형 태양전지를 제작하였다. ZnO 나노선 기판은 투명한 FTO 기판 위에 ZnO를 진공증착시켜 seed layer를 제작하고 그 위에 $10{\mu}m$정도의 길이의 나노와이어를 성장시킨 후, 밴드갭이 낮은 CdS, CdSe 물질과의 다중접합을 이용하여 제작하고, 이러한 나노선 구조위에 chemical solution deposition을 이용하여 ${\beta}$-CuSCN을 형성시켰다. 양자점 감응형 태양전지는 ZnO 나노선을 photoanode로 이용하고 ZnO 나노선은 암모니아수와 아연염을 이용한, 비교적 저온의 수열합성법을 통해 합성하였고, sensitizer로 쓰인 CdS, CdSe 물질은 CBD방식을 통하여 합성된 나노선 위에 in-situ로 접합시켰다. 또한, 기존의 액체전해질을 이용한 양자점 감응형 태양전지의 안정성을 향상시키기 위해 p-type의 반도체 물질인 CuSCN물질을 propyl sulfide를 이용, ${\sim}80^{\circ}C$의 열을 가하여 in-situ 방식으로 다공성 구조에 효율적으로 접합이 가능하도록 deposition하였다. 일반적으로, CuSCN film은 홀 전도체로서의 장점을 지닌 반면, 전도성이 낮은 단점이 있기 때문에 이를 향상시키기 위해서 첨가제를 이용, 농도에 따라서 전도도가 향상되고 셀의 성능이 향상되는 것을 확인하였다. 이와 같이 합성된 구조는 주사전자현미경(SEM), X-선 회절(XRD), 솔라시뮬레이터 등의 분석장비를 이용하여 태양전지로서의 특성을 분석하였다. 또한 안정성 평가를 위하여 시간에 따른 셀의 특성변화도 비교하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권6호
• /
• pp.1989-1992
• /
• 2012

We present a low temperature (${\approx}70^{\circ}C$) method to prepare anatase, vertically aligned feather-like $TiO_2$ (VAFT) nanowire arrays $via$ reactive pulsed DC magnetron sputtering. The synthesis method is general, offering a promising strategy for preparing crystalline nanowire metal oxide films for applications including gas sensing, photocatalysis, and 3rd generation photovoltaics. As an example application, anatase nanowire films are grown on fluorine doped tin oxide coated glass substrates and used as the photoanode in dye sensitized solar cells (DSSCs). AM1.5G power conversion efficiencies for the solar cells made of 1 ${\mu}m$ thick VAFT have reached 0.42%, which compares favorably to solar cells made of the same thickness P25 $TiO_2$ (0.35%).

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.411-414
• /
• 2013

In order to enhance the photovoltaic property of the CdS/CdSe co-sensitized quantum dot sensitized solar cells (QDSSCs), the surface of nanoporous $TiO_2$ photoanode was modified by ultrathin $Al_2O_3$ layer before the deposition of quantum dots (QDs). The $Al_2O_3$ layer, dip-coated by 0.10 M Al precursor solution, exhibited the optimized performance in blocking the back-reaction of the photo-injected electrons from $TiO_2$ conduction band (CB) to polysulfide electrolyte. Transient photocurrent spectra revealed that the electron lifetime (${\tau}_e$) increased significantly by introducing the ultrathin $Al_2O_3$ layer on $TiO_2$ surface, whereas the electron diffusion coefficient ($D_e$) was not varied. As a result, the $V_{oc}$ increased from 0.487 to 0.545 V, without appreciable change in short circuit current ($J_{sc}$), thus inducing the enhancement of photovoltaic conversion efficiency (${\eta}$) from 3.01% to 3.38%.

• 한국전기전자재료학회논문지
• /
• 제22권6호
• /
• pp.501-505
• /
• 2009

$TiO_2$ nano-particle paste was prepared by ethyl cellulose, $\alpha$-terpineol and bis(2-ethylhexyl) phthalate (dioxcyl phthalate) for dye-sensitized solar cells (DSSCs). Dispersion and absorbance of $TiO_2$ photoanode films was controlled by adding different amount of ethyl cellulose and $\alpha$-terpineol. The morphology of prepared $TiO_2$ films was studied by field emission scanning electron microscopy (FE-SEM) and the optical properties of $TiO_2$ films were measured by UV/vis spectra. Photovoltaic-current density was observed to determine the electrochemical response of DSSCs. Energy conversion efficiency was obtained about 7.1% at ethyl cellulose and $\alpha$-terpineol at optimal mixed ratio (as ethyl cellulose: 0.1 g; $\alpha$-terpineol: 1.5 ml) under illumination with AM 1.5($100\;Wcm^{-2}$) simulated sunlight.

• 청정기술
• /
• 제27권3호
• /
• pp.217-222
• /
• 2021

Although monolayer black phosphorus (BP) and few-layer BP nanosheets (NSs) have been extensively studied as promising alternatives to graphene, research has focused primarily on atomically thin-layered BP in an isolated form. In order to realize the practical applications of BP-related devices, a BP film based on continuous networking of few-layer BP NSs should be developed. In this study, a transparent BP film with high quality was fabricated via a vacuum filtration method. An oxygen-free water solvent was used as an exfoliation medium to avoid significant oxidation of the few-layer BP NSs in liquid-phase exfoliation. The exfoliation efficiency from bulk BP to the few-layer BP NSs was estimated at 22%, which is highly efficient for the production of continuous BP film. The characteristics of the high-quality BP film were determined as 98% transparency, minimum oxidation of 18%, structural stability, and an appropriate bandgap of about 1.8 eV as a semiconductor layer. In order to demonstrate the potential of the BP film for photocatalytic activity, we performed photoelectrochemical water oxidation of the transparent BP film. Although its performance should be improved for practical applications, the BP film could function as a photoanode, which offers a new potential semiconductor in water oxidation. We believe that if the BP film is adequately engineered with other catalysts the photocatalytic activity of the BP film will be improved.