• 한국산림과학회지
• /
• 제89권2호
• /
• pp.161-166
• /
• 2000

지류문화재의 소재로 주로 사용되어온 수록한지를 네 종류로 구분하고 이를 PEG 분자량과 농도별에 따른 광 변색 억제 효과를 태양의 분광분포와 거의 흡사한 xenon arc 등(燈)을 조사(照射)해 시험한 바 다음과 같이 요약할 수 있었다. 1) Polyethylene glycol을 분산제로 사용한 미 표백 한지는 광 조사 이후 PEG 분자량과는 관계없이 10시간까지는 백색도가 급속히 떨어지는 경향을 보였으나 그 이후부터는 점진적으로 향상되는 경향을 나타내 광 변색 억제의 효과가 있음을 알 수 있었다. 2) 약품 표백을 실시한 한지는 20시간 이후부터 백색도가 증가하는 현상이 나타나 시간이 지체될 뿐 변색 억제의 효과는 있음을 알 수 있었다. 3) 황단규근(黃團葵根)을 분산제로 사용해 초지(秒紙)한 한지(韓紙)는 PEG 400-20%에 침지했을 때 백색도가 가장 낮았으나 광 조사 후는 백색도 차가 가장 적어 광 변색 억제효과가 가장 컸음을 알 수 있었다. 4) 광 열화에 의한 표면현상으로 제일 먼저 나타나는 황변(黃變) 현상을 PEG 침지로써 억제할 수 있음을 b*+값이 감소하는 것으로 알 수 있었고 명도 저하 역시 L* 값의 증가로 상당량 억제할 수 있음을 알 수 있었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.337-347
• /
• 2006

Papers made from unbleached and bleached bagasse chemimechanical pulp were chemically modified by acetylation. The effects of irradiation on unbleached and bleached also reduced papers of bagasse chemimechanical pulp before and after acetylation were investigated in this study. Chemimechanical pulp was prepared from bagasse and then bleached with hydrogen peroxide. Unbleached and hydrogen bleached pulps were reduced by Sodium borohydride in different procedures. Paper sheets were prepared from pulps and then acetylated using a technical grade of acetic anhydride. Accelerated photo-aging was run on the samples using fluorescent lamps to verify photo-stability of paper sheets before and after pretreatments. Brightness reversion (as Post-color number) and other optical properties of the paper sheets were measured. Efficient inhibition of photo-yellowing of papers made from bagasse CMP was achieved by acetylation. The acetylated unbleached CMP was noticeably photo-bleached during irradiation. Sodium borohydride reduction followed by acetylation had the same effect as acetylation alone at the same degree of reaction time and reductive treatment did not affect the yellowing rate to any great extent. The pre-reduced, acetylated unbleached papers were, however, not brightened during irradiation. Calculation done by Kubelka-Munk equation showed that reductive treatment had little effect in reducing the photo-yellowing of paper made from CMP pulp; a small stabilization effect was observed in the case of bleached CMP, while unbleached CMP was slightly more prone to discolor in the later phase of photo-reversion. The improved stability towards light may was closely related to the decrease in the phenolic hydroxyl content as a result of blocking by acetyl groups during treatment with acetic anhydride. The results support the hypothesis that phenolic hydroxyl has an important role in the process of photo-reversion of high-yield pulps. The results obtained in this study demonstrate that the acetylation of paper manufactured from peroxide bleached Bagasse CMP significantly retards light-induced discoloration. The inhibition of yellowing is connected with a decrease in the phenolic hydroxyl content of both unbleached and peroxide bleached papers.

• Carbon letters
• /
• 제9권3호
• /
• pp.195-199
• /
• 2008

A nanocomposite consisting of $Fe_3O_4$ and MWCNT was produced via sol-gel technique using $FeCl_3$ along with MWCNT by calcination at $300^{\circ}C$. The degradation effect of rhodamine B dye has been investigated under UV illumination in a darkroom. The degradation reaction was studied by monitoring the discoloration of dye as a function of irradiation time using UV-visible spectrophotometeric technique. The $Fe_3O_4$-MWCNT samples have continuous degradation ability under the UV illumination with the first order kinetics and the dye removal was better than in the pristine $Fe_3O_4$. The resultant composite catalyst was found to be efficient for the photo-Fenton reaction of the dye.

• Journal of the Korean Wood Science and Technology
• /
• 제50권4호
• /
• pp.283-298
• /
• 2022

Wood has always been used for various day-to-day applications such as interior or exterior construction materials, and household products. However, it can undergo photodegradation and discoloration by environmental factors including ultraviolet (UV) light, and thus has shortened its service life. Bleaching or delignification of wood surfaces is a suitable solution to stabilize wood against weathering by UV because these techniques can alter or remove the chromophores in lignin, which is a main factor of wood discoloration. To improve the color stability of wood surface according to the lifespan, surface delignification was conducted using peracetic acid (PAA) and hydrogen peroxide (HP) on the woods of Larix kaempferi and Quercus mongolica. After the PAA treatment, L^* increased considerably from 60-70 to 90-95. Furthermore, wood surface color did not change significantly after UV exposure. The color differences (𝜟E^*) between before and after PPA treatment of wood showed the 4.8-12.2 of L. kaempferi, and 1.7-3.7 of Q. mongolica, respectively. The lignin-related peaks in Fourier transform infrared spectroscopy (FT-IR) spectra disappeared with increased duration of PAA treatment. These results confirmed that the lignin component was partially or completely removed after the PAA treatment; the color differences (𝜟E^*) clearly showed that there was a reduction in redness (a^*) and yellowness (b^*), and an increase in lightness (L^*) owing to the removal of lignin. Based on these results, this study demonstrated that the partial removal of lignin from wood surfaces is a fundamental method for resolving photo-degradation.

• Carbon letters
• /
• 제9권4호
• /
• pp.294-297
• /
• 2008

A CNT-$TiO_2$ nano composite was prepared from titanium chloride ($TiCl_4$) via sol-gel process using multi walled carbon nano tube (MWCNT) followed by calcination at $450^{\circ}C$. Spectral analysis revealed that the formed $TiO_2$ resided on the carbon in anatase form. The effect of adsorption was investigated using aqueous solution of methylene blue and procion blue dye. The photochemical reaction of CNT-$TiO_2$ composite in aqueous suspensions was studied under UV illumination in batch process. The reaction was investigated by monitoring the discoloration of the dyes employing UV-Visible spectro-photometeric technique as a function of irradiation time. The catalyst composites were found to be efficient for the photodegradation of the dye.

• 접착 및 계면
• /
• 제24권1호
• /
• pp.26-35
• /
• 2023

일반적으로 유기 용매를 이용한 코팅제는 제조 과정에서 발암성 물질인 휘발성 유기화합물 (Volatile Organic Compounds, VOC)을 배출하게 되어 환경적인 문제로 사용이 규제되고 있다. 게다가 기존의 화석 연료 자원이 한정적이라 에너지 자원 고갈을 야기시킨다는 문제가 있다. 따라서 본 연구에서는 바이오매스 물질인 isosorbide의 함량을 달리하여 광경화형 바이오매스계 우레탄 아크릴레이트 올리고머를 합성하여 코팅제의 물성 평가를 진행하였다. Isosorbide 함량이 증가할수록 점도, 유리전이온도, 인장강도, 내오염성, 연필경도 등이 증가하였고 신율 및 굴곡성은 낮게 측정되었으며, 부착력은 BOI-3가 가장 좋은 결과를 나타내었다. 올리고머의 isosorbide 함량을 20% 로 고정하고 polycaprolactone diol(PCL)과 Ecoprol H1000(Ecoprol)의 함량비에 따라 광경화형 바이오매스계 우레탄 아크릴레이트 올리고머를 합성하여 코팅제의 물성 평가를 진행하였다. PCL/Ecoprol의 함량비가 증가할수록 유리전이온도, 신율 및 굴곡성은 증가하였지만 인장강도와 연필경도는 감소하였으며, PCL 첨가로 인한 표면 결합력 향상으로 부착력과 내오염성이 크게 증진한 것을 확인할 수 있었다. 합성된 올리고머의 필름은 모두 변색 없이 투명한 결과를 나타내었다.