• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.129.2-129.2
• /
• 2010

AEM which were used for solid alkaline fuel cell(SAFC) were prepared by photo polymerization in method pore-filling with various quaternary ammonium cationic monomers and crosslinkers without an amination process. Their specific thermal and chemical properties were characterized through various analyses and the physico-chemical properties of the prepared electrolyte membranes such as swelling behavior, ion exchange capacity and ionic conductivity were also investigated in correlation with the electrolyte composition. The polymer electrolyte membranes prepared in this study have a very wide hydroxyl ion conductivity range of 0.01 - 0.45S/cm depending on the composition ratio of the electrolyte monomer and crosslinking agent used for polymerization. However, the hydroxyl ion conductivity of the membranes was relatively higher at the whole cases than those of commercial products such as A201 membrane of Tokuyama. These pore-filling membranes have also excellent properties such as smaller dimensional affects when swollen in solvents, higher mechanical strength, lowest electrolyte crossover through the membranes, and easier preparation process compared of traditional cast membranes. The prepared membranes were then applied to solid alkaline fuel cell and it was found comparable fuel cell performance to A201 membrane of Tokuyama.

• Journal of Forest and Environmental Science
• /
• v.28 no.1
• /
• pp.56-62
• /
• 2012

There is little information about appropriate greenspace structures to satisfy aesthetic function in Korea. The purpose of this study was to analyze Korean's aesthetic preferences for greenspace structures concerned with urban tree plantings of an areal type to explore desirable greenspace landscapes. The study considered 5 structural variables of greenspace which were species composition, tree density, tree size, vertical and horizontal structure, and tree layout pattern. A photo-questionnaire was prepared through color simulations of different landscape types for each structural variable. Preference responses of an interval-scale rating from 214 respondents were statistically analyzed between landscape types and between respondent groups. Respondents preferred greenspace landscapes with diverse tree species to single species, higher tree density to lower density, larger trees to many smaller trees, multilayered and grouped plantings to single-layered and sparse plantings, and informal pattern to formal pattern. These preferences tended to be relatively higher for educated specialist and student groups than for other generalist group. Thus, multilayered and dense plantings in natural pattern including larger trees of diverse species, which are similar to ecological plantings, are recommended to increase aesthetic function of greenspace.

• Journal of the Korean Society of Combustion
• /
• v.4 no.1
• /
• pp.27-38
• /
• 1999

We constructed a wire-cylinder type pulsed corona discharge system for $NO_x$ removal, which was operated in room temperature. A emission spectrometer was built with a boxcar averager and monochrometer equipped with photo-multiplier tube detector. The sensitivity of the emission spectrometer was greatly improved by synchronizing the emission spectrometer with pulsed corona discharge system using a triggered spark-gap switch. $N_2$ spectrum($c^3{\Pi}_u{\rightarrow}X^1{\Sigma}_g{^+}$) was measured in the range of 300 - 450 nm and oxidizing OH radical emission($A^2{\Sigma}^+{\rightarrow}X^2{\Pi}$) was measured in case $N_2$ was supplied with water bubbling. As wet gas composition of inlet $N_2$ supplied in the discharge system increased, the intensity of OH emission was increased and saturated at wet gas composition 50%. We also investigated additive effect of $C_2H_4,\;H_2O,\;H_2O_2$ on the intensity of OR emission and $NO/NO_2/NO_x$ reduction and analysed the related reaction mechanism in corona discharge process. $H_2O_2$ additive increased the intensity of OH emission and $NO/NO_x$ reduction.

• The Journal of Korean Medicine
• /
• v.24 no.2
• /
• pp.109-120
• /
• 2003

Objectives: This study was conducted to evaluate the clinical efficacy of EC102, a composition containing oriental medicine, for relieving VDT syndrome, including eye symptoms and musculo-skeletal symptoms. Methods: The study was conducted by using a double blind randomized controlled trial design. 40 subjects were randomly assigned to the placebo group or the EC102 group. The visual analogous scale (VAS) was used to evaluate various VDT symptoms, including eye pain, eye fatigue, back pain, shoulder pain and so on. Refractory indexes were measured using refractometer, and tear film break-up time (BUT) were measured using fluorescein strip. Blood circulation was measured using photo-plethysmography. Blood pressure and blood biochemistry were also measured. Statistical analysis was conducted by a Mann-Whitney test using SPSS 9.0 software. Results: The EC102 group showed a statistically significant reduction of eye symptoms including eye fatigue, eyelid fatigue, itching, pain, and photophobia when compared with the placebo group (P<0.05). The EC102 group also showed a statistically significant reduction of back pain compared with the placebo group (P<0.05). No side effects on liver function and blood biochemistry were observed. Conclusions: EC102 has significant clinical efficacy for relieving symptoms of VDT syndrome.

• Korean Institute of Interior Design Journal
• /
• no.29
• /
• pp.181-187
• /
• 2001

The art museum plays a role as a cultural space that can solve the cultural desire of people and see a good art works. It is in exhibition space that they personally exchange the feeling between an art work and a viewer in art museum. The types and works - a fiber, a photo, an establishment that needs many places, devices, a video art, and an action art called "performance", cultural art - are shown in small art museum. Moreover, exhibition spaces are modified into the space of another art activities like dancing, music concerts in small art museum because it has no profit space for diverse art activities. And the exhibition the characters of the exhibition space in small art museum. So, it needs to change the characters of the exhibition space in small art museum. Under these background, this stud\ulcorner surveys and analyzes the exhibits, the organization methods, the modified conditions, and the scale of the existing exhibitional space in small art museum. Therefore, the goal of this study is to suggest the composition of the exhibition space unit considering the function and the multifunction in minimum art museum and small art museum.

• Journal of the Korean Society of Combustion
• /
• v.22 no.1
• /
• pp.39-45
• /
• 2017

Combustion instability analysis of partially premixed model gas turbine combustor was conducted with 1D lumped method. Flame Transfer Function(FTF) was obtained with variation of fuel composition by Photo Multiplier Tube(PMT) and Hot Wire Anemometry(HWA). Decreasing instability frequency was observed when combustor length increased and multi-mode instability was confirmed. Instability frequency mode was changed while $H_2$ composition rate was increased and had agreement with experimental value. This work confirms that prediction of longitudinal combustion instability mode of partially premixed combustor is possible using 1D lumped method.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1325-1326
• /
• 2007

We have demonstrated new functionalities of Ag doped chalcogenide glasses based on their capabilities as solid electrolytes. Formation of such amorphous systems by the introduction of silver via photo-induced diffusion in thin chalcogenide films is considered. The influence of silver on the properties of the newly formed materials is regarded in terms of diffusion kinetics and Ag saturation is related to the composition of the hosting material. Silver saturated is related to the composition of the hosting material. Silver saturated Ge-Ch glasses have been used in the formation of solid electrolyte which is the active medium in programmable metallization cell (PMC) devices. This paper concerns our more recent work on silver-doped germanium selenide electrolytes and describes the electrical characteristics of PMC devices made from these materials following annealing at $300^{\circ}C$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.155.2-155.2
• /
• 2013

Strain-relaxed SiGe layer on Si substrate has numerous potential applications for electronic and opto- electronic devices. SiGe layer must have a high degree of strain relaxation and a low dislocation density. Conventionally, strain-relaxed SiGe on Si has been manufactured using compositionally graded buffers, in which very thick SiGe buffers of several micrometers are grown on a Si substrate with Ge composition increasing from the Si substrate to the surface. In this study, a new plasma process, i.e., the combination of PIII&D and HiPIMS, was adopted to implant Ge ions into Si wafer for direct formation of SiGe layer on Si substrate. Due to the high peak power density applied the Ge sputtering target during HiPIMS operation, a large fraction of sputtered Ge atoms is ionized. If the negative high voltage pulse applied to the sample stage in PIII&D system is synchronized with the pulsed Ge plasma, the ion implantation of Ge ions can be successfully accomplished. The PIII&D system for Ge ion implantation on Si (100) substrate was equipped with 3'-magnetron sputtering guns with Ge and Si target, which were operated with a HiPIMS pulsed-DC power supply. The sample stage with Si substrate was pulse-biased using a separate hard-tube pulser. During the implantation operation, HiPIMS pulse and substrate's negative bias pulse were synchronized at the same frequency of 50 Hz. The pulse voltage applied to the Ge sputtering target was -1200 V and the pulse width was 80 usec. While operating the Ge sputtering gun in HiPIMS mode, a pulse bias of -50 kV was applied to the Si substrate. The pulse width was 50 usec with a 30 usec delay time with respect to the HiPIMS pulse. Ge ion implantation process was performed for 30 min. to achieve approximately 20 % of Ge concentration in Si substrate. Right after Ge ion implantation, ~50 nm thick Si capping layer was deposited to prevent oxidation during subsequent RTA process at $1000^{\circ}C$ in N2 environment. The Ge-implanted Si samples were analyzed using Auger electron spectroscopy, High-resolution X-ray diffractometer, Raman spectroscopy, and Transmission electron microscopy to investigate the depth distribution, the degree of strain relaxation, and the crystalline structure, respectively. The analysis results showed that a strain-relaxed SiGe layer of ~100 nm thickness could be effectively formed on Si substrate by direct Ge ion implantation using the newly-developed PIII&D process for non-gaseous elements.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.405-407
• /
• 2008

Body fat measures a large number places body because error is oversized that measure in single specification region to measure body whole body fat degree by non-invasive optical method and bio-electrical impedance method. Use LED source of light that center wavelength is 660nm wavelength and measure at same time by BIA(Bio-electrical Impedance Analysis) method And then photo-electricity method calculate fat correlation formula.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.174-174
• /
• 2006

By condensing two different functional monomers, highly fluorescent aromatic polymers were prepared to produce a conjugated- conjugated spacer-type copolymer or conjugated-non-conjugated spacer-type copolymer. As synthesized polymers were soluble in an organic solvent and showed significantly enhanced optical properties compared to its monomer. Variation in the monomer composition afforded polymers having multifunctionaility such as photochromic-fluorescent polymers. Transparent thin films of the polymer as a solid medium were prepared using spin coating method and fabricated as a photoswitch, which showed photo-induced conductivity switching properties depending on the core monomeric unit in the polymers.