• Tribology and Lubricants
• /
• v.14 no.3
• /
• pp.7-16
• /
• 1998

The electrorheological (ER) behavior of suspensions in silicone oil of phosphoric ester cellulose powder (average particle size: 17.77 $\mu$m) was investigated at room temperature with electric fields up to 2.5 KV/mm. For development of anhydrous ER suspensions using at wide temperature range, we aimed to know the effect of activation of phosphoric ester cellulose particles on the ER activities. As a first step, the anhydrous ER suspensions mixing with the phosphoric ester cellulose particles which were treated with 2M phosporic acid and 4M urea were measured. After activating the anhydrous ER suspensions at 12$0^{\circ}C$, not only the analysis of dispersing cellulose particles which were reacted by phosphoric ester but also the electrorheological characteristics of ER suspensions such as dielectric constant, current density, electrical conductivity and rheological properties were studied. From the experimental results, the activation of phosphoric ester cellulose particles had an influence on the ER properties of anhydrous ER suspensions. As the activation time went by, the size and number of dispersing particles, the electrical properties and the initial apparent viscosity $(η_0)$ of ER suspensions were increased till the activation time passed 5 hours. Also, it was possible, the electrorheological effect $($\tau$/$\tau$_0)$ of ER fluids was grown by the activation of phosphoric ester cellulose particles.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.974-978
• /
• 1999

This study was concerned with the scouring effect of anionic surfactants, PAPE(sodium polyoxyethylene alkyl phosphoric ester) for cotton fibres. Sodium polyoxyethylene(7) nonylphenyl phosphoric ester(CPB-1) and the sodium polyoxyethylene(7) tridecyl phosphoric ester(CPB-2) were synthesized by the phosphoric esterification reaction from NP-7(polyoxyethylene(7) nonylphenyl ether) and TDA-7(polyoxyethylene(7) tridecyl ether) as scouring agents. Defoaming ability, fibre wetting time and absorbency rate of scouring agents were investigated. Being compared with the conventional scouring agent(Ultravon GP; Ciba-guyge Co.), CPB-1 and CPB-2 showed a higher defoaming ability in the cotton scouring process at room temperature. And CPB-1 has a higher wetting effect than the agents, CPB-2 or GP in distilled water bath but CPB-2 showed more scouring effect in 1.2 wt % NaOH solution bath.

• Tribology and Lubricants
• /
• v.15 no.1
• /
• pp.8-16
• /
• 1999

The electrorheological (ER) behavior of suspensions in silicone oil of phosphoric ester cellulose powder (average particle size : 18$\pm$1 ${\mu}{\textrm}{m}$) was investigated on the elevated temperature up to 10$0^{\circ}C$. For development of anhydrous ER fluids using at wide temperature range, it should be researched to how the effect of temperature on the ER activities. As a first step, the anhydrous ER suspensions mixing with the phosphoric ester cellulose particles which were made from the phosphoric ester reaction of cellulose were measured. As increasing the temperature, not only the analysis of electrical properties such as dielectric constant current density and electrical conductivity but also the rheological properties of ER fluids were studied. From the experimental results, the temperature had a large influence to the ER properties of anhydrous ER fluids. The current density, conductivity and elecoorheological effect ($\tau$$_{A}$$\tau$$_{0}$) of phosphoric ester cellulose ER fluids were proportional to the temperature with power law. And the shear stress of them was closely related with the square of dielectric constant mismatch parameter ($\beta$$^2$) under constant shear rate and electric field.d.

• Tribology and Lubricants
• /
• v.15 no.3
• /
• pp.240-247
• /
• 1999

The electrorheological (ER) behavior of suspensions in silicone oil of phosphoric ester cellulose particles (average particle size : 18$\pm$1${\mu}{\textrm}{m}$) coated with octadecylamine ( $C_{18}$ $H_{37}$ N $H_2$) as surfactant was investigated at room temperature. For development of anhydrous ER suspension using at real application, it should be researched how can reduce deposition of ER particles in ER suspension. Anhydrous ER suspensions mixing with phosphoric ester cellulose particles coated with octadecylamine were measured. As increasing the coating concentration of octadecylamine, not only analysis of electrical properties such as dielectric constant, current density and electrical conductivity but also rheological properties of ER suspensions were studied. From the experimental results, coating concentration of surfactant had large influence to ER properties of anhydrous ER suspension. Current density, conductivity and electrorheological effect ($\tau$/$\tau$$_{0}$) of ER suspension were linearly reduced with increasing the coating concentration of octadecylamine. But ER suspensions dispersed the phosphoric ester cellulose particles coated with octadecylamine showed reducing deposition of ER particles and could be redispersed easily.

• KSBB Journal
• /
• v.7 no.2
• /
• pp.118-125
• /
• 1992

Most of cosmetics are emulsion-type products which contain the sources of nutrition, i.e., vegetable oil, mineral oil and carbohyrate etc.. These additives are usually very susceptible to the contamination by microorganisms. The purpose of this study is to obtain the data necessary not only to prevent dermalopathia occurred by microbials but also to maintain the quality. In this experiment we observed the growth of P.aeruginosa in the cosmetics with or without antiseptics so as to prevent contamination. During the contamination period, the phase became unstable and creaming phenomina was happened together with some discoloration and bad smell. The pH of cosmetic was decreased from 7.6 to 6.0 and the concentration was increased from 1.443 to 1.453 in terms of refractive index during 40 days incubation. By adding antiseptics to the cosmetics, the number of P. aeruginosa from the challenge test method were decreased from $10^8$ cell/ml to $5{\times}10^3$ cell/ml. For the antibacterial effect against P. aeruginosa, p-hydroxy benzoic acid propyl ester in phosphoric acid buffer solution showed the best result.

• Elastomers and Composites
• /
• v.38 no.1
• /
• pp.72-80
• /
• 2003

Phosphoric ester compound was employed as thermal resistant and flame retardant for chlorinated polyethylene(CPE) rubber material which is used to prepare automotive oil cooler hose. Cure characteristics, physical properties, thermal resistance, and flame retardation of CPE rubber compounds were investigated. CPE rubber which has excellent properties such as cold resistance and chemical corrosion resistance, and is inexpensive in price than existing ethyleneacrylate rubber(EAR) was used to prepare a rubber compound useful for hose. A non-halogen flame retarding agent N,N'-bis- (diphenylphosphoro) diaminohexane(BDPDH), which is condensed phosphoric ester, was synthesized and it was mixed to CPE rubber material with the range of $0{\sim}30 phr$. From the test results, rheological properties, heat resistance, and flame retardance of CPE rubber compounds were found out to be much increased. The optimum content of BDPDH to rubber which gives maximum effect on thermal resistance and flame retardation, within the range of tolerable specification for rubber materials, was determined to be 20 phr.

• The Korean Journal of Rheology
• /
• v.10 no.3
• /
• pp.143-151
• /
• 1998

실리콘 오일에 인산처리 셀룰로오스 분말을 분산시킨 비수계 전기유변성(ER) 유체 의 전기유변 거동을 상온에서 최대 2.5KV/mm의 전기장하에서 실험하였다. 넓은 온도 영역 에서 사용이 가증한 비수계 ER 유체를 개발하기 위해 셀룰로오스의 인산 에스테르 반응이 ER 유체의 전기유변효과에 미치는 영향을 조사하였다. 먼저 여러 가지의 인산처리 농도로 처리된 인산처리 셀룰로오스 미립자를 분산시킨 ER 유체를 제조한 후 ER 유체의 유전상수, 전류밀도 및 전기전도도 등과 같은 전기적 특성을 측정하였으며 ER 유체의 전기유변 특성 또한 측정하였다. 인산처리 셀룰로오스가 분산된 비수계 ER 유체의 전류밀도는 셀룰로오스 의 인산 에스테르 반응에서의 인산처리 농도에 의해 조절할수 있음을 알수있었으며 셀룰로 오스의 인산처리 농도가 2.5 M과 3.0 M 사이일 때 인산처리 셀룰로오스가 첨가된 비수계 ER 유체의 전기유변효과 ($\tau$/$\tau$0)가 가장 높게 측정되었다.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.1025-1032
• /
• 2008

(4,5-Dichloro-6-oxo-6H-pyridazin-1-yl)phosphoric acid diethyl ester (3a) are efficient and selective coupling agents for the amidation of carboxylic acids. Amidation of aliphatic and aromatic carboxylic acids with aliphatic and aromatic amines using 3a under mild condition gave chemoselectively the corresponding amides in good to excellent yield. Three protected-dipeptides were also synthesized from N-BOC-Phe and O-Me-amino acid hydrochlorides using 3a under mild condition.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.11
• /
• pp.2247-2251
• /
• 2008

• Restorative Dentistry and Endodontics
• /
• v.10 no.1
• /
• pp.7-16
• /
• 1984

The purpose of this study was to investigate the pulpal responses to adhesive resins as phosphoric ester system: "Clearfil F II" (Composite filling material), "Panavia EX" (Composite cementing Material) and "Silar" (Microfilled Compsoite resin) comparing with Zinc-Oxide-Eugenol cement. Total 70 cavities of the permanent healthy teeth from 5 dogs were prepared and placed with experimental resins and Zinc-Oxide-Eugenol cement as control. The dogs were sarificed at 5 intervals of 3 days, one, two, four, six weeks. The specimens were routinely prepared and stained by Hematoxylin-Eosin. Followings were the results obtained through microscopic examination. 1. In cases of Clearfil F II and Panavia EX without etching and lining, pulp response in the early stage showed more severe vascular congestion and hemorrhage than that of Zinc-Oxide-Engenol cement. 2. The pulp response of totally etched cases was similar to that of unetched cases in the groups of Clearfil F II and Panavia EX. 3. The cases of Clearfil F II and Panavia EX with enamel etching showed no significant histologic change compared to that of total cavity etching. 4. The Silar case with total etching showed retarded tendency of histologic recovery compared to Clearfil F II and Panavia EX group. 5. Generally, pulp responses of experimental groups were not severe and the six week case showed the evidence of a histologic recovery.