• Restorative Dentistry and Endodontics
• /
• 제24권1호
• /
• pp.240-250
• /
• 1999

The purpose of this study was to evaluate the effect of different etching time on the shear bond strength and adaptibility of composite to enamel and dentin when used one-bottle adhesive Prime & Bond$^{TM}$ 2.0. The proximal and occlusal surfaces of 88 extracted human molars were ground to expose enamel(n=44) and dentin (=44) using diamond wheel saw. Teeth were randomly assigned to four test groups(n=11) and received the following treatments : Control group were conditioned with 36% phosphoric acid for 20 sec. according to the manufacturer's directions. Experimental 10 sec. group, 30 sec. group and 60 sec. group were conditioned with 36% phosphoric acid for 10 sec., 30 sec. and 60 sec., respectively. Teeth were rinsed and dried for 2 sec. Prime & Bond$^{TM}$ 2.0 were applied according to the manufacturer's directions and Spectrum$^{TM}$ TPH composite resins were bonded to enamel and dentin surfaces. All specimens were stored in distilled water for 24 hours. Eighty specimens were sheared in a Universal Testing Machine with a crosshead speed of 5mm/minute. One way ANOVA and LSD test were used for statistical analysis of the data. Failure modes of all specimens after shear bond strength test were examined and listed. Also, representive postfracture modes and eight specimens were examined under scanning electron microscope. The results of this study were as follows: 1. The shear bond strength to enamel was the highest value in 30 sec. group (20.68${\pm}$8.54MPa) and the lowest value in 10 sec. group (14.92${\pm}$6.07MPa), so there was significant difference of shear bond strength between two groups (p<0.05). But there was no significant difference among other groups (p>0.05). With longer etching time to enamel from 10 sec. to 30 sec., higher the shear bond strength was obtained, but the shear bond strength was decreased at 60 sec. etching time. 2. The shear bond strength to dentin was the highest value in control group (13.08${\pm}$6.25MPa) and the lowest value in 60 sec. group (9.47${\pm}$3.35MPa), but there was no significant difference among the all groups (p>0.05). The eching time over 20 sec. decreased the shear bond strength to dentin. 3. In SEM observation, the enamel and resin interfaces were showed close adaptation with no relation to etching time of enamel. And the dentin and resin interfaces were showed close adaptation at 20 sec. and 30 sec. etching time, but showed some gaps at 10 sec. and 60 sec. etching time. Accordingly, these results indicated that a appropriate etching time in Prime & Bond$^{TM}$ 2.0 was required to be 30 sec. in enamel and 20 sec. in dentin for the high shear bond strength and good adaptation between the composite resin and tooth substance.

• 한국유기농업학회지
• /
• 제27권4호
• /
• pp.453-461
• /
• 2019

본 연구는 옥수수 유기재배에서 대부분 수입에 의존하여 사용되고 있는 유박의 대체제 선발을 위해 아미노산액비와 퇴비차의 혼합처리를 평가하였다. 그 결과, 유기질 비료 성분 중 질소, 유효인산, 칼륨, 칼슘 및 마그네슘 함량은 유박 > 아미노산액비 > 퇴비차 순이었다. 이들 각각의 유기질 비료는 토양 화학성 변화에 대한 영향이 미미하였다. 옥수수 생육량 중 이삭중에 대해 아미노산액비 및 유박 단독처리가 유의성이 있었고 100립 생체중에 대해서는 모든 처리가 무처리와 비교하여 유의한 증가를 보였다. 이들 퇴비차, 아미노산액비 및 유박 단독처리는 옥수수 상품성 수량을 무처리 대비 각각 3.9, 5.4 및 5.9% 향상시켰다. 한편, 유박 대체제 선발을 위하여 퇴비차와 아미노산액비를 혼합 처리한 결과, 혼합처리도 토양 화학성 변화에 영향이 미미하였다. 생육량에서는 착수고, 착립장, 이삭중 및 100립 생체 중에서 유박 단독처리와 비교하여 혼합처리가 유의성 있는 증가를 보였고 혼합처리에 의한 상품성 수량은 유박 단독처리 대비 3.9% 향상되었다. 따라서, 아미노산액비와 퇴비차의 혼합처리는 유박을 대체할 수 있는 유기농자재 중 하나라고 판단한다.

• Restorative Dentistry and Endodontics
• /
• 제24권4호
• /
• pp.647-656
• /
• 1999

The purpose of this study was to investigate the shear bond strength and marginal microleakage of composite to enamel and dentin according to different treatment methods when the applied bonding agent was contaminated by artificial saliva. For the shear bond strength test, the buccal and occlusal surfaces of one hundred twenty molar teeth were ground to expose enamel(n=60) and dentin surfaces(n=60). The specimens were randomly assigned into control and 5 experimental groups with 10 samples in each group. In control group, a bonding system(Scotchbond$^{TM}$ Multi-Purpose plus) and a composite resin(Z-100$^{TM}$) was bonded on the specimens according to manufacture's directions. Experimental groups were subdivided into 5 groups. After polymerization of an adhesive, they were contaminated with at artificial saliva on enamel and dentin surfaces: Experimental group 1 ; artificial saliva was dried with compressed air. Experimental group 2 ; artificial saliva was rinsed with air-water spray and dried. Experimental group 3 ; artificial saliva was rinsed, dried and applied an adhesive. Experimental group 4 ; artificial saliva was rinsed, dried, and then etched using phosphoric acid followed by an adhesive. Experimental group 5, artificial saliva was rinsed, dried, and then etched with phosphoric acid followed by consecutive application of both a primer and an adhesive. Composite resin(Z-100$^{TM}$) was bonded on saliva-treated enamel and dentin surfaces. The shear bond strengths were measured by universal testing machine(AGS-1000 4D, Shimaduzu Co. Japan) with a crosshead speed of 5mm/minute under 50kg load cell. Failure modes of fracture sites were examined under stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's test. For the marginal microleakage test, Class V cavities were prepared on the buccal surfaces of sixty molars. The specimens were divided into control and experimental groups. Cavities in experimental group were contaminated with artificial saliva and those surfaces in each experimental groups received the same treatments as for the shear test. Cavities were filled with Z-100. Specimens were immersed in 0.5% basic fuchsin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from the one specimen. Marginal microleakages of enamel and dentin were scored under streomicroscope and averaged from four sections. The data were analyzed by Kruskal-Wallis test and Fisher's LSD. The results of this study were as follows. 1. The shear bond strength to enamel showed lower value in experimental group 1(13.20${\pm}$2.94MPa) and experimental group 2(13.20${\pm}$2.94MPa) than in control(20.03${\pm}$4.47MPa), experimental group 4(20.96${\pm}$4.25MPa) and experimental group 5(21.25${\pm}$4.48MPa) (p<0.05). 2. The shear bond strength to dentin showed lower value in experimental group 1(9.35${\pm}$4.11MPa) and experimental group 2(9.83${\pm}$4.11MPa) than in control group(17.86${\pm}$4.03MPa), experimental group 4(15.04${\pm}$3.22MPa) and experimental group 5(14.33${\pm}$3.00MPa) (p<0.05). 3. Both on enamel and dentin surfaces, experimental group 1 and 2 showed many adhesive failures, but control and experimental group 3, 4 and 5 showed mixed and cohesive failures. 4. Enamel marginal microleakage was the highest in experimental group 1 and there was a significant difference in comparison with other groups (p<0.05). 5. Dentin marginal microleakages of experimental group 1 and 2 were higher than those of other groups (p<0.05). This result suggests that treatment methods, re-etching with 35% phosphoric acid followed by re-application of adhesive or repeating all adhesive procedures, will produce good effect on both shear bond strength and microleakage of composite to enamel and dentin if the polymerized bonding agent was contaminated by saliva.

• 대한치과보철학회지
• /
• 제41권3호
• /
• pp.319-324
• /
• 2003

Statement of problem. Adhesives in dentistry playa major role in the success of restorative treatments. In the treatment of all ceramic restoration it is needed to find the adequate bond strength between enamel and dentin. Purpose. The purpose of this study was to evaluate shear bond strength of resin cement bonded to extracted human uncut enamel, cut enamel, and dentin in vitro. Material and methods. Ten freshly extracted anterior teeth without any previous restorative treatments were chosen. The extracted teeth were embedded in PMMA cold acrylic in the shape of a cylinder, 25 mm in diameter by 25 mm in height. The bonding system used was as follow: Uni-Etch (32% phosphoric acid), One-Step adhesive, Duolink resin cement. The specimens were acid etched and rinsed with water. Two layers of One-Step adhesive were coated with a disposable brush on the uncut enamel. VIP curing light at $500mV/cm^2$ was used to cure the adhesive. For cut enamel shear bond test, the specimen used for uncut enamel was further reduced approximately $0.3{\sim}0.5mm$ using a laminate preparation diamond bur (0.3 mm in depth). The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit SiC paper and cleaned with distilled water. The bonding procedure on the cut enamel was same as uncut enamel bonding procedure. For dentin bonding test, the specimen used for cut enamel was further reduced approximately $0.5mm{\sim}1.0mm$ using a laminate preparation diamond bur (0.5 mm in depth of diamond cutting). The amount of reduction was evaluated with the silicone mold. The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit silicon carbon paper and cleaned in distilled water. The bonding procedure on the dentin was same as uncut enamel bonding procedure. All samples were mounted and secured on the Ultradent shear bond test sample holder, and Ultradent restricted shear bond testing device was used with Universal Instron machine until fracture. Analysis of variance (ANOVA) test was performed comparing the result at P<0.05. Multiple comparison (Tukey) was used to compare each groups. Result. The result showed that the mean value in shear bond strength of resin cement bonded to uncut enamel, cut enamel and dentin were 27.04 Mpa, 30.25 Mpa and 26.39 Mpa with respect. Conclusion. Within the limitation of this study, the mean value of the shear bond strength of cut enamel was higher than those of uncut enamel or dentin. However there existed no statistical differences between three different human dentition substrates due to increased adhesive characteristics.

• Restorative Dentistry and Endodontics
• /
• 제39권1호
• /
• pp.12-16
• /
• 2014

Objectives: Extensively destroyed teeth are commonly restored with composite resin before cavity preparation for indirect restorations. The longevity of the restoration can be related to the proper bonding of the resin cement to the composite. This study aimed to evaluate the microshear bond strength of two self-adhesive resin cements to composite resin. Material and Methods: Composite discs were subject to one of six different surface pretreatments: none (control), 35% phosphoric acid etching for 30 seconds (PA), application of silane (silane), PA + silane, PA + adhesive, or PA + silane + adhesive (n = 6). A silicone mold containing a cylindrical orifice ($1mm^2$ diameter) was placed over the composite resin. RelyX Unicem (3M ESPE) or BisCem (Bisco Inc.) self-adhesive resin cement was inserted into the orifices and light-cured. Self-adhesive cement cylinders were submitted to shear loading. Data were analyzed by two-way ANOVA and Tukey's test (p < 0.05). Results: Independent of the cement used, the PA + Silane + Adhesive group showed higher microshear bond strength than those of the PA and PA + Silane groups. There was no difference among the other treatments. Unicem presented higher bond strength than BisCem for all experimental conditions. Conclusions: Pretreatments of the composite resin surface might have an effect on the bond strength of self-adhesive resin cements to this substrate.

• 한국식품영양과학회지
• /
• 제46권4호
• /
• pp.459-464
• /
• 2017

본 연구에서는 국내 미설정 보존료인 biphenyl의 분석법 확립을 위해 국내외 다양한 분석법을 조사하고 비교 검토하였다. 식품용 기구 및 용기 포장공전 목재류 시험법의 경우 범용적 장비와 비교적 간단한 시험 전처리 방법이지만 회수율이 10% 이하로 측정되었으며 방해 물질 제거가 어려워 효과적인 시료 전처리와 분석방법이 될 수 없음을 확인하였다. 식품공전의 잔류농약 분석법의 경우 시료 전처리에 사용된 추출 용매는 아세토니트릴이고 정제는 아미노프로필 카트리지를 이용하였으며, 정성 및 정량분석이 가능하고 효과적으로 matrix를 제거하는 장점이 있으나, 30% 이하의 회수율과 전처리 시간이 많이 소요되는 것을 확인하였다. AOAC official method 분석법의 경우 n-heptane을 이용하여 추출 후 무수황산나트륨 칼럼을 이용하여 정제한 뒤 TLC와 spectrophotometry를 이용하여 확인 시험 결과 시료 전처리에 시간 소요가 많고 재현성과 숙련도가 요구되는 단점이 확인되었다. QuEchERs 방법은 시료를 아세토니트릴로 추출 후 dispersive SPE kit을 이용하여 전처리 후 GC-MS와 HPLC를 이용하여 확인 결과 시료 전처리 시간이 비교적 짧고 좋은 재현성이 있는 장점이 있으나, 소모품 사용 시 경제적 부담이 큰 단점을 가지고 있다. Anklam E 등의 시험법은 GC-FID이며 디클로로메탄, 메탄올, 헥산을 이용한 단순 추출 후 2시간 방치한 다음 GC-MS와 GC-FID로 분석하는데, 일부 시료에서 효과적인 matrix 제거가 어려운 것으로 확인되었다. 따라서 국내외 여러 시험방법을 검토 및 응용하여 간단한 시료 전처리와 분석법을 확립하였다. 시료 중의 biphenyl 분석에 사용한 칼럼은 Capcellpak UG 120 $C_{18}$($4.6mm{\times}250mm$, $5{\mu}m$), 이동상은 3차 증류수에 녹인 25 mM phosphoric acid(solvent A)와 아세토니트닐에 녹인 25 mM phosphoric acid(solvent B)를 이용하여 gradient로 분석하였다. UV 흡수 파장은 230 nm, 오븐 온도는 $40^{\circ}C$, 유속은 1.0 mL/min을 이용하였다. 직선성은 0.999($R^2$) 이상의 높은 직선성을 보였으며 직선성 각각의 농도에 대한 정밀도는 6.7% 이하, 정확도는 86.7~102.9%, 검량선 내 서로 다른 농도 3가지에 대한 일내 정밀도는 0.7~1.9%, 정확도는 95.8~104.0%로 확인되었다. 일간은 정밀도가 1.6~2.4%, 정확도는 96.7~102.4%로 확인되었다. 검출한계 $0.04{\mu}g/mL$, 정량한계는 $0.13{\mu}g/mL$로 측정되었다. 회수율 측정 결과 3가지 농도에서 정밀도는 1.8% 이하이고, 회수율은 92.7~99.4%로 측정되었다. 확립된 biphenyl의 분석법 확립의 적용성 검토를 위해 시료는 총 111건을 수집하였으며, 일본 현지에서 구입한 시료는 30건, 서울 경기 대형마트 및 중소형 식품 도매점에서 81건을 수집하여 총 111건에 대해 분석한 결과 모든 시료에서 불검출이 확인되었다. 향후 국내 미설정 보존료인 biphenyl을 사용한 식품에 대해 정량한계($0.13{\mu}g/mL$)까지 분석할 수 있는 분석법 확립과 국내에 비의도적으로 혼용될 수 있는 수입식품의 사전사후 관리에 기여될 수 있을 것으로 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.382-388
• /
• 2002

Compomer is composed of matrix and filler : matrix is made of the combination of resins and polycarboxylic molecules that are light-cured, and a filler is a glass component which is capable of ion-release. The resin content of compomers produces polymerization shrinkage which can adversely affect marginal adaptation. Pretreatment is a fundamental step which is treated with conditioner or primer in the use of these materials. Microleakage of restorative materials has been investigated mostly by dye penetration method. Dye penetration method was not quantitative and not measured repeatedly. Fluid filtration method, introduced and developed by Pashley's group, has been extensively used for 20 years for research purpose to understand the physiology of dentin, as well as the effects of various restorative treatments on dentin permeability. It permits quantitative, nondestructive measurment of microleakage in a longitudinal manner. The purpose of this study was to evaluate the change of dentin permeability according to the process of compomer restoration. In this study. Cl V cavities were prepared on buccal surface of thirty extracted human molars. The prepared cavities were etched by 37% phosphoric acid. The experimental teeth were randomly divided into three groups. Each group was treated with following materials Group 1 : Prime & Bond NT/Dyract AP, Group2： Single Bond/F2000 compomer, Group 3 : Syntac Single Component/Compoglass. The bonding agent and compomer were applied for each group following manufacturers information. Dentin permeability of each group was measured at each process by fluid filtration method; Step 1 : preparation(smear layer). Step 2 : etching(smear layer removal), Step 3 : applying the bonding agent, Step 4 : filling the compomer. Dentin permeability was expressed by hydraulic conductance ($\mu\textrm{l}$ min$^{-1}$cm$H_2O$$^{-1}$). The data were analysed statistically using One-way ANOVA and Sheffe's method. The results were as follows : 1. Dentin permeability differences between each process were significant except between step 1 and step 2(p<0.01). 2. Dentin permeability after removal of smear layer was highly increased(p<0.01). 3. In most case, decrease of dentin permeability was obtained by applying bonding agent(p<0.01). 4. Dentin permeability differences among the experimental groups were not significant(p>0.05). 5. None of compomers used in this study showed perfect seal at the interface.

• Restorative Dentistry and Endodontics
• /
• 제27권3호
• /
• pp.299-309
• /
• 2002

The purposes of this study were to evaluate the microtensile bond strength of one-step adhesives accord ing to various dentin surface treatments and to observe the interface between resin(Z-100$^{TM}$) and dentin under SEM. In this study forty-five non-caries extracted human molars and three adhesive systems were used ; AlI-Bond 2(AB), One-Up Bond F(OU), AQ-Bond(AQ). ; In Group 1, 2, 3, AB was used and tooth surfaces were treated by smearing(S), ultrasonic cleansing(US), etching(E) respectively. In Group 4. 5, 6, One-Up Bond F was used and tooth surfaces were also treated as the same way above. In Groups 7, 8, 9, AQ Bond was used and tooth surfaces wet$.$e treated as the same way. Each specimen was prepared for microtensile bond testing, and were stored for 24hrs in 37$^{\circ}C$ distilled water. After that, microtensile bond strength for each specimen was measured. Specimens were fabricated to examine the failure patterns of interface between resin and dentin and observed under the SEM. The results were as follows ; 1. The results(mean$\pm$SD) of microtensile test were group 1, 25.69$\pm$4.31MPa; group 2, 40.93$\pm$10.94MPa; group 3, 47.65$\pm$8.85MPa； group 4, 35.98$\pm$9.14MPa； group 5, 39.66$\pm$8.45MPa; group 6, 43.26$\pm$13.01MPa; group 7, 25.07$\pm$4.2MPa；group 8, 30.4$\pm$4.74MPa；group 9, 33.61$\pm$7.88MPa. 2. One-Up Bond F was showed the highest value of 36.98$\pm$9.14MPa in dentin surface treatment with smearing, and there were significant differences to the other groups (p<0.05). 3. All-Bond 2 was showed the highest value of 40.93$\pm$10.94MPa in dentin surface treatment with ultra-sonic cleansing, but was no significant difference to One-Up Bond F(p>0.05) 4. All-Bond 2 was showed the highest value of 47.65$\pm$8.85MPa in dentin surface treatment with etch ing(10%phosphoric acid), and there were significant differences to the other groups(p<0.05). 5. All-Bond 2 was showed the highest value of 47.65$\pm$8.85MPa in dentin surface treatment according to manufacture's directions. but was no significant difference to One-Up Bond F(p>0.05). 6. AQ Bond was skewed the lowest microtensile bond strength with various dentin surface treatment, and the were significant differences to the other groups(p<0.05).

• 한국작물학회지
• /
• 제65권2호
• /
• pp.130-141
• /
• 2020

본 연구 목적은 선발된 생선, 골분+어분, 고춧잎, 깻묵 발효액비를 다양한 처리방법별로 고추 및 토마토 묘에 처리하여 생육촉진 정도를 알아보고자 수행하였다. 또 다른 연구목적은 선발된 자재 자체와 이들 자재를 이용하여 제조한 발효, 물 및 열수추출물에 대한 무기영양소 용출 정도를 조사하여 효과적인 추출방법을 찾는데 있었다. 생선, 골분+어분, 고춧잎 및 깻묵을 발효액비 처리에 의한 토마토 육묘의 생육은 경엽처리가 관주 처리에 비해 좋았고, 처리횟수(1회 또는 2회)에 상관없이 생육촉진에 효과적이었다. 이들 액비처리에 의한 고추육묘 생육의 경우는 관주처리가 경엽처리에 비해 좋았다. 처리횟수별 고추와 토마토 생육 증진은 큰 차이가 없었다. 그러나 전반적으로 액비에 의한 생육 증진은 고추보다는 토마토에서 좋았고, 파종 후 40일 육묘보다는 파종 후 20일묘에서 큰 것으로 나타났다. 또한 고추와 토마토의 생육 증진은 자재 간에 차이는 크지 않았다. 파종 후 20일에 이들 사용한 액비는 고추와 토마토의 초장보다는 지상부 생체중 증가에 영향을 미치는 것으로 나타났다. 고추 지상부 생체중의 경우는 모든 액비에서 0.1% 처리에서 효과가 있었고, 토마토의 경우도 생선액비를 제외하고 0.1%에서 효과가 있었다. 그러나 생선의 경우는 1% 이상의 농도에서 토마토 지상부 생채중이 증가하였다. 파종 후 40일 경우도 사용한 액비는 고추와 토마토의 초장보다는 지상부 생체중 증가에 영향을 미치는 것으로 나타났다. 고추 지상부 생체중의 경우는 생선액비(0.5%)을 제외한 골분+어분, 고춧잎 및 깻묵 액비에서 0.1% 처리에서 효과가 있었다. 토마토의 지상부 생체중의 경우는 0.1% 모든 액비처리에서 증가하였다. 이들 액비처리에 의한 고추 및 토마토의 생육 증가는 질소, 인산 및 칼륨과 같은 주요 대량 무기영양소 뿐만 아니라 다양한 대량 및 미량 무기영양소의 상호작용에 의해 기인되는 것으로 사료된다. 생선, 골분, 어분, 고춧잎 및 깻묵에 함유되어 있는 무기영양소는 발효추출물에 의해 용출이 잘되지 않았다. 그러나 이들 자재에 의한 물과 열수추출법은 다량원소 용출이 발효추출법보다 많아서 추후 고추 및 토마토 생육을 촉진하는데 사용될 수 있을 것으로 기대된다.