• 마이크로전자및패키징학회지
• /
• 제15권1호
• /
• pp.45-50
• /
• 2008

Through via 3D SiP의 평탄화 공정에 적용하기 위해 전기도금법을 이용하여 직경 $50{\mu}m$와 $20{\mu}m$ via를 구리로 채운 후 전해연마를 실시하여 전해액 종류와 첨가제에 따른 특성을 분석하였다. 전해연마시 양극과 음극의 전위차 변화를 측정하여 평탄화 공정의 종료 시점을 판단하였다. 인산에 가속제인 acetic acid와 억제제인 glycerol을 첨가한 전해액으로 전해연마를 실시하여 via 형상 안팎의 단차를 제거하면서 평탄화를 이를 수 있었고, 양극과 음극의 전위차가 급격히 증가하는 시점에서 공정을 종료하여 via 위에 과도금된 구리만을 제거할 수 있었다.

• 대한치과보철학회지
• /
• 제32권1호
• /
• pp.23-36
• /
• 1994

Most investigators recommended that porcelain surface should be roughened with abrasives and/or be etched with acid in repairing the fractured porcelain with composite resin. This study was designed to evaluate the effect of porcelain surface treatments on the bond strength between porcelain and composite resin by measuring the shear bond strength and observing the porcelain surface with SEM. 48 porcelain disc were fabricated with Vintage porcelain and embedded in epoxy resin with the test surface exposed. The specimens were divided four groups at random and the test surfaces of the four groups were prepared as follows : Group 1 : Porcelain surface was roughened with a fine diamond and treated with 32% phosphoric acid gel for 10 seconds. Group 2 : Porcelain surface was roughened with a fine diamond and etched with 8% hydrofluoric acid gel for 5 minutes. Group 3 : Porcelain surface was roughened with a coarse diamond and treated with 32% phosphoric acid gel for 10 seconds. Group 4 : Porcelain surface was roughened with a coarse diamond and etched with 8% hydrofluoric acid gel for 5 minutes. All specimens were washed for 30 seconds. A representative specimen of each group was selected and the porcelain surface was observed with SEM at 1000 magnification. Remaining specimens were silanated, bonded with composite resin, thermocycled, and shear-tested on specially designed zig connected to Instron machine. The results were as follows : 1. The shear bond strength of the group etched with hydrofluoric acid was significantly higher than that of group treated with phosphoric acid(p<0.01). 2. The shear bond strength of the group roughened with a fine diamond was not significantly different from that of the group roughened with a coarse diamond(p>0.01). 3. SEM examination of prepared porcelain surfaces revealed that the surface etched with hydrofluoric acid showed numerous microporosities, undercut, and rougher surface than the surface treated with phosphoric acid. 4. All specimens etched with hydrofluoric acid showed cohesive failure within porcelain, but specimens treated with phosphoric acid mainly showed adhesive failure between porcelain and composite resin.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2015년도 추계학술논문요약집
• /
• pp.465-466
• /
• 2015

In this study, different amount of (fe(0)) were dissolve into different strength of phosphoric ($H_3PO_4$) acid and the optimum solubility was observed at 0.89M Fe(0) into 4M of $H_3PO_4$ acid. Different concentration of oxalic acid was added to determine the optimum precipitated condition. The dissolution kinetics of Fe(0) into $H_3PO_4$ acid was investigated at $40-50^{\circ}C$. The optimum Fe-oxalate precipitate was dried and thermal decomposition using DSC-TG was conducted. Approximately 52 wt(%) of oxalic acid was removed at $300^{\circ}C$. Iron oxides such as magnetite and hematite that may be formed on the surface of nuclear waste were also dissolved into the $H_3PO_4$ acid and the optimum solubility for magnetite is 0.005M while that for hematite is 0.02M in 8M $H_3PO_4$ acid, respectively.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.90-94
• /
• 2006

액정(LCD)과 반도체 제조공정에서 발생하는 인산, 질산, 초산, Al, Mo 등이 혼재하고 있는 인산계 혼산폐액을 액정제조공정에서 사용할 수 있는 고순도 에칭액으로 재활용하기 위해서 용매추출법, 진공 증발법, 확산투석법 및 이온교환법의 각각의 기술적 특성을 살린 혼합 처리공정을 이용하여 고순도 인산 회수 기술을 확립하고 상용화 시스템을 개발하고자 하였다. 시험 결과 진공증발에 의해 질산과 초산을 100% 제거할 수 있었고, TOP를 사용한 용매추출에서도 추출 4단, 탈거 6단, 상비 1/3으로 완벽하게 제거할 수 있었다. 이온교환의 전단계로 적용한 확산투석에서 Al 97%, Mo 75% 제거할 수 있었고 이온교환공정에서 Al 및 Mo를 각각 1ppm 이하로 정제할 수 있었다.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.238-249
• /
• 2021

In this study, the effect on flame retardancy and various physical properties when TiO₂ was added with a citric acid/phosphate complex acid catalyst together with Pyrovatex CP new (N-methylol dimethylphosphonopropionamide), a phosphorus-based flame retardant, was studied on cotton fibers. SEM-EDS analysis was performed to confirm the surface characteristics and surface element analysis of the flame-retardant treated cotton fibers, and a vertical carbonization test was performed to confirm the char formation capability and flame retardancy according to the phosphoric acid ratio. By comparing the LOI index before and after washing 10 times, the washing durability of the flame retardant solution containing the phosphoric acid catalyst and TiO₂ was tested by LOI index after ten washing cycles. In addition, the influence of the flame-retardant processing on the physical properties were compared including thermogravimetric analysis (TGA), tear strength and whiteness.

• Tribology and Lubricants
• /
• 제14권3호
• /
• pp.7-16
• /
• 1998

The electrorheological (ER) behavior of suspensions in silicone oil of phosphoric ester cellulose powder (average particle size: 17.77 $\mu$m) was investigated at room temperature with electric fields up to 2.5 KV/mm. For development of anhydrous ER suspensions using at wide temperature range, we aimed to know the effect of activation of phosphoric ester cellulose particles on the ER activities. As a first step, the anhydrous ER suspensions mixing with the phosphoric ester cellulose particles which were treated with 2M phosporic acid and 4M urea were measured. After activating the anhydrous ER suspensions at 12$0^{\circ}C$, not only the analysis of dispersing cellulose particles which were reacted by phosphoric ester but also the electrorheological characteristics of ER suspensions such as dielectric constant, current density, electrical conductivity and rheological properties were studied. From the experimental results, the activation of phosphoric ester cellulose particles had an influence on the ER properties of anhydrous ER suspensions. As the activation time went by, the size and number of dispersing particles, the electrical properties and the initial apparent viscosity $(η_0)$ of ER suspensions were increased till the activation time passed 5 hours. Also, it was possible, the electrorheological effect $($\tau$/$\tau$_0)$ of ER fluids was grown by the activation of phosphoric ester cellulose particles.

• 대한치과교정학회지
• /
• 제25권3호
• /
• pp.341-353
• /
• 1995

이 연구는 부식농도가 전단결합강도와 법랑질 표면의 부식깊이에 미치는 영향을 관찰하기 위하여 표면을 편평하게 연마한 소의 법랑질을 $0%,\;5%,\;10%,\;20%,\;30%,\;40%,\;50%,\;60%,\;70%,\;80%$ 및 $85\%$ 인산용액으로 60초간 부식시키고, 브라켓 접착의 전단결합강도와 법랑질 표면의 부식깊이와 조도를 측정하고, 주사전자현미경으로 부식면을 검경하였으며, 이상에서 얻은 자료를 통계처리하고 평가하여 다음과 같은 결론을 얻었다. 법랑질 표면의 부식깊이는 인산액의 농도가 $40\%$ 내지 $50\%$에 도달할 때까지 증가하다가 그 이후의 농도증가와 함께 점진적으로 감소하였다. 법랑질 표면의 부식깊이와 부식면의 조도 사이에 상관성이 없었으며, 부식면의 조도와 전단결합강도 사이에 중등도의 상관성($\gamma$=0.63)을 보였다. 인산액의 농도가 $5\%$에서 $40\%$에 도달할때까지 균질의 편평한 부식면을 나타내는 소견을 보였으나 $50\%$와 $60\%$에서 불균질의 과도한 그리고 편평하지 못한 부식면소견을 보였으며, $10\%$에서 $60\%$까지의 인산액에 의한 법랑질 부식 후 레진 접착제의 전단결합강도 사이에는 유의차가 얼었으며, $5\%$와 $70\%$의 인산액에 의한 것은 전자보다 작았으나 구강내에서 교정력에 견딜수 있는 전단결합강도를 나타낼 것으로 추정된다.

• 공업화학
• /
• 제9권5호
• /
• pp.680-688
• /
• 1998

친수성 단량체 glycidylmethacrylate (GMA)에 가교제인 divinylbenzene (DVB)과 세공형성제인 2,2,4-trimethylpentane (TMP)량을 각각 0~10 mol %과 0~100 vol %로 변화시켜 현탁중합법으로 macroreticular (MR)형 GMA-DVB 공중합체 (RG라 칭함)을 합성하였다. 이들 공중합체를 벤젠 존재하에서 인산으로 인산화시켜 인산기를 갖는 거대망상형 양이온 교환수지 (macroreticular type cation exchange resins containing phosphoric acid groups, RGP)을 제조하였으며, 이들 수지에 대한 물성과 우라늄의 흡착능을 고찰하였다. RGP수지들의 물성은 합성시 가교도와 희석제량에 따라 영향이 있었으며, 우라늄의 흡착능은 가교도 영향인 경우 $$RGP-10(50){\sim_=}RGP-1(50)>RGP-2(50)>RGP-5(50)>RGP-0(50)$$ 이며, 희석제량의 영향인 경우는 RGP-2(100)>RGP-2(75)>RGP-2(50)>RGP-2(30)>RGP-2(0)순이였다. RGP수지들의 물성과 우라늄의 흡착능에서 가교도의 영향인 경우 RGP 수지의 세공구조, 양이온 교환 용량 및 팽윤비에 의존하며, 희석제량의 영향인 경우는 양이온 교환 용량보다도 비표면적과 세공구조에 더 영향이 있었다.

• 대한치과교정학회지
• /
• 제3권1호
• /
• pp.21-28
• /
• 1972

저자는 direct bonding system의 pretreatment액 처리후 Epoxy adhesive의 bonding strength의 변화를 측정하기 위해서 발거된 상악 전치 진면 법랑질 표면에 pretreatment액으로서 $65\%$ phosphoric acid를 도포한 실험군과 도포하지 않은 비교군을 비교연구하고 임상에 적용하여 다음과 같은 결과를 얻었다. 1. 법랑질 표면에 pumicing과 $65\%$ phosphoric acid를 도포했을때 joint strength는 현저히 상승했다. 2. Epoxy adhesive의 bonding strength는 plastic attachment를 치아면에 접착유지시키기에 충분하며 임상적으로 이용할 수 있다. 3. Joint area가 클 수록 bonding strength는 증가했다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1991년도 추계학술대회 논문집
• /
• pp.160-164
• /
• 1991

The effect of various parameters, such as temperature, current density and operating valtage on the performance of phosphoric acid fuel cell stack was studied by using numerical analysis. The utilization ratio of reaction gas, inlet condition of reaction air and cooling air, inlet condition of cooling air flow latin were changed regularly, The results showed good agreements with the existing results and experimental ones.