• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.1-8
• /
• 2021

Currently, lithium-ion batteries are mainly used in energy storage equipment products including automobiles. This can be exposed to dangerous situations such as explosions in the event of incorrect battery management conditions that are overcharged or left in high temperature conditions. It also causes a situation battery cannot be used when it has been over discharged. Therefore, a system that manages the state of the battery is required. The battery management system aims to obtain optimum battery efficiency by accurately recognizing the state of the battery and keeping the voltage of each cell constant. In this paper, we develop a lithium-iron phosphate battery that has higher safety than a general lithium-ion battery. Then, in order to manage this, we try to develop the algorithm of the BMS module based on the Bluetooth communication using the MATLAB-SIMULINK.

• Journal of Environmental Science International
• /
• v.24 no.1
• /
• pp.47-53
• /
• 2015

Removal characteristics of Cu(II) ions by solid-phase extractant immobilized D2EHPA and TBP in PVC were investigated. Cu(II) ion concentrations in the solution and removal capacity of Cu(II) ion according to operation time were compared. The lower the initial concentration of Cu(II) ion in aqueous solution was, the removal capacity of Cu(II) ion by solid-phase extractant was increased relatively. The bigger the initial concentration of Cu(II) ion was, the removal capacity of Cu(II) ion was increased relatively. The pseudo-second-order kinetics according to operation time was showed more satisfying results than the pseudo-first-order kinetics for the removal velocity of Cu(II) ion. The removal capacity of Cu(II) ion was 0.025 mg/g in aqueous solution of pH 2, but the removal capacity of Cu(II) ion was increased to 0.33 mg/g mg/g in aqueous solution of pH 4 according to increasing pH.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.47-55
• /
• 1993

The quantitative determination of trace cyanide ion in the presence of sulfide ion has been studied by addition of cupric ion using differential pulse Cathodic Stripping Voltammetry. The detection limit of cyanide ion in the presence of $5.0*10^{-5}M$ sulfide ion and $1.0*10^{-3}M$ cupric ion was $2.0*10^{-7}M$ in KCI-Phosphate buffer(pH=7.0) at accumulation potential -0.30V and accumulation time 3.0 min.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.529-534
• /
• 1995

The metal ion selective resins were prepared by surface template polymerization using monooleyl phosphoric acid (1), oleyl methyl phosphoric acid (2) or oleyl ethyl phosphoric acid (3) as an amphiphilic host surfactant. The $Cu^{2+}$-imprinted resins prepared in the presence of $Cu^{2+}$ adsorbed $Cu^{2+}$ much more effectively than did their reference resins. On the other hand, the $Cu^{2+}$-imprinted resins showed much less binding ability to $Zn^{2+}$. The template-dependent selectivity should be ascribed to a favorable placement of the surface-anchored metallophilic groups for multidentate coordination to specific metal ion.

• Clean Technology
• /
• v.30 no.1
• /
• pp.28-36
• /
• 2024

As demand for electric vehicles increases, the market for lithium-ion batteries is also rapidly increasing. The battery life of lithium-ion batteries is limited, so waste lithium-ion batteries are inevitably generated. Accordingly, lithium was selectively preleached from waste lithium iron phosphate (LiFePO₄, hereafter referred to as the LFP) cathode material powder among lithium ion batteries, and iron phosphate (FePO₄) powder was recovered. The recovered iron phosphate powder was mixed with alkaline sodium carbonate (Na₂CO₃) powder and heat treated to confirm its crystalline phase. The heat treatment temperature was set as a variable, and then the leaching rate and powder characteristics of each ingredient were compared after water leaching using Di-water. In this study, lithium showed a leaching rate of approximately 100%, and in the case of powder heat-treated at 800 ℃, phosphorus was leached by approximately 99%, and the leaching residue was confirmed to be a single crystal phase of Fe₂O₃. Therefore, in this study, lithium, phosphorus, and iron components were individually separated and recovered from waste LFP powder.

• Journal of Animal Science and Technology
• /
• v.47 no.6
• /
• pp.1025-1032
• /
• 2005

This study was carried out to separate ovotransferrin in chicken egg white by gel chromatography and heparin affinity chromatography. In gel filtration which was performed with 50mM Phosphate buffer (pH 7.2, 0.15M salt) at a flow rate of 2.0 ml/min, ovotransferrin and ovalbumin were eluted together in fraction number 11-16. In order to separate pure ovotransferrin, fraction No. 12-14 of them which have high concentration of ovotransferrin were concentrated and rechromatographed. However, the ovotransferrin did not separated clearly. In heparin affinity chromatography, the separation was performed with 50mM ethylaminetetraacetic acid (EDTA, pH7.2) and 50mM Phosphate buffer (pH 7.2, 0.15M salt contained) on ferrous and ferric ion saturated column at as same flow rate as gel filtration system's. Ovotransferrin and albumin were eluted together at 10-15min (fraction No.3) and 15-20min (fraction No.4), respectively. However, purified ovotransferrin was eluted at 156-165min and 165-175min (tube No.32-33) with 50 mM phosphate buffer (pH 7.2, 0.15M salt free), respectively. Heparin affinity chromatography with ferric ion saturated column was resulted in the best separation of ovotransferrin rather than separation by gel chromatography and ferrous ion saturated heparin affinity chromatography.

• Analytical Science and Technology
• /
• v.15 no.4
• /
• pp.329-334
• /
• 2002

Tributyl phosphate(TBP) is used in solvent extraction process for radioactive waste. This compound may be degraded to dibutyl phosphate($DBP^-$), monobutyl phosphate($MBP^{2-}$) and ${PO_4}^{3-}$ by radioactive material. Amount of $DBP^-$ and $MBP^{2-}$ in TBP must be monitored because they production of these compounds means degradation of which leads to a decrease in the extraction yield. Retention behavior for $DBP^-$, $MBP^{2-}$, $F^-$, $Cl^-$, ${NO_2}^-$, ${NO_3}^-$, ${SO_4}^{2-}$ and ${PO_4}^{3-}$ are studied with AS4A-SC(Dionex) analytical column and $Na_2CO_3$/NaOH eluent by Ion chromatography. Optimum condition for these anions is 2 mM $Na_2CO_3$/1 mM NaOH eluent. All anions by this condition is well separated within 15min. Dynamic range is $10{\mu}g/mL$ - $100{\mu}g/mL$ for DBP and $5{\mu}g/mL$ - $50{\mu}g/mL$ for $MBP^{2-}$, respectively. The Detection limit for AS4A-SC are $1{\mu}g/mL$ for $DBP^-$ and $0.5{\mu}g/mL$ for $MBP^{2-}$ in this system with a $25{\mu}L$ sample loop.

• Journal of environmental and Sanitary engineering
• /
• v.4 no.1 s.6
• /
• pp.7-15
• /
• 1989

According to the increase of population and development of industrialization air and water pollution problems are still keeping going to great nuisance to human activities. Specially man should drink 2l clean water to maintain our health every day, but we afraid of drink the city tap water because of the contaminants like heavy metals, bacteria trihalomethane, etc. In the analysis of the anions in potable water, we usually adapt the Standard methods for the Examination of Water and Wastewater. But this method is tedious and time consuming, so the Ion Chromatography method is now used in research of water quality. Author worked with Ion Chromatography in measuring the anions in drinking water by attaching conductivity dector to normal High Performance Liquid Chromatograph. Low-capacity ion-exchange coulmn and dilute eluents, 0.00M phthalic aic was used in this study. The concentration of chloride ion was 1.55 ppm$\~$3 8.81ppm, nitrate ion was 5.45 ppm$\~$18.27ppm, and sulfate ion was 19.64 ppm$\~$28.86 ppm. The phosphate ion was detected only in Apt. tap water as 167.99 ppm whose amount was supposed to be used as a water pipe cleaner.

• Environmental Engineering Research
• /
• v.17 no.1
• /
• pp.17-25
• /
• 2012

Concern about green water problem has surfaced as a serious issue in Korea. In order to solve this problem, it is necessary to research inhibition of green water and corrosion control of copper pipe in water service. This paper discovered that moderate corrosion inhibitors can solve the green water problem and copper corrosion in water service by adding the optimal concentration of corrosion inhibitors based on regulation. Firstly, in the case of phosphate based corrosion inhibitors, as dosage of the corrosion inhibitor increases from 1 mg/L to 5 mg/L, the relative effect of corrosion inhibitor declines rapidly. Secondly, except for 1 mg/L dosage of silicate based inhibitor, relative effects of the inhibitor displays a positive number depending on inhibitor concentration. The most significant result is that the amount of copper release shows a downward trend, whereas the phosphate based inhibitor accelerates copper ion release as the inhibitor dosage increases. Thirdly, as the dosage of mixed inhibitors increases to 10 mg/L, the copper release change shows a similar trend of phosphate based inhibitor. Lastly, according to the Langelier saturation index (LI), silicate based inhibitors have the most non corrosive value. Larson ratio (LR) indicates that phosphate based inhibitors are the least corrosive. Korea water index (KWI) represents that silicate based inhibitors are most effective in controlling copper pipe corrosion.

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.10a
• /
• pp.232-235
• /
• 1998

ion conducting polymers have been extensively investigated because of their potential application as an electrolyte in solid state batteries [1]. Among the polymer electrolytes, solid polymer electrolytes (SPEs) composed of ion conducting polymer and alkali metal salt have many advantages such as high ionic conductivity, high energy density and light weight. This made them suitable replacement for liquid electrolytes. (omitted)