• Design & Manufacturing
• /
• 제13권1호
• /
• pp.55-60
• /
• 2019

Smart-phone in the recently released high-end applied to the camera module is equipped with the most features auto focusing camera module. Also, auto focusing camera module is divided into voice coil motor, encoder, and piezo according to type of motion mechanism. Auto focusing camera module is composed of voice coil motor (VCM) as an actuator and leaf spring as a guide and suspension. VCM actuator is made of magnet, yoke as a metal, and coil as a copper wire. Recently, the assembly as yoke and magnet is made by human resources. These process has a long process time and it is difficult to secure quality. Also, These process is not economical in cost, and productivity is reduced. Therefore, an automatic assembly as yoke and magnet is needed in the present process. In this paper, we have developed an automatic assembly device that can automatically assemble yoke and magnet, and performed verifying performance. Therefore, by using the developed automatic assembly device, it is possible to increase the productivity and reduce the production cost.

• 한국인터넷방송통신학회논문지
• /
• 제13권5호
• /
• pp.135-142
• /
• 2013

하드웨어와 부품 소재 산업의 급속한 발전으로 휴대 단말의 진화가 거듭되고 있으며, 모바일 폰을 이용한 다양한 응용 기술들이 최근 스마트 응용의 주류를 이루고 있다. 특히 스마트 기기의 카메라 모듈을 이용한 흥미로운 어플들이 지속적으로 개발되고 있어 다양한 모바일 응용의 사용이 가능하게 되었다. 본 논문에서는 스마트 기기의 카메라 모듈로 촬영한 화상 이미지내의 특정 피사체의 실물 크기를 비교적 정확하게 계측하기 위한 스마트 폰 어플을 설계하고 구현하였다. 이때 피사체의 정확한 계측을 위해 촬영 상황에 따라 4가지 계측 모드로 구현하였고, 스마트폰 기종이나 시스템 SW에 따라 촬영 결과 화상 이미지의 차이를 최소화할 수 있도록 0점 조절 모듈을 두어 조정하였다. 본 논문에서 구현한 어플의 계측 정확도는 모의실험을 통해 비교 분석하였다.

• 한국전기전자재료학회논문지
• /
• 제20권9호
• /
• pp.808-811
• /
• 2007

Aspheric glass lens have recently been used in camera phone module because they are more effective than spherical ones. In this paper, the grinding condition of the tungsten carbide molding core has been found after applying DOE to the development of the aspheric glass lens for the 3 Megapixel and 2.5x camera-phone module. Also, the ultra precision grinding process was investigated under this condition by experiment. Re-Ir coating was applied on the ground surface of the tungsten carbide molding core. The influence of Re-Ir coating on the form accuracy and surface roughness of molding core was compared and evaluated. The form accuracy and surface roughness of the molding core were improved by application of Re-Ir coating on the surface of the tungsten carbide molding core.

• 한국전기전자재료학회논문지
• /
• 제20권8호
• /
• pp.720-725
• /
• 2007

This study investigated the pressing conditions in the molding of aspheric glass lenses for the mega pixel phone camera module using the DOE method. Tungsten carbide (WC; Japan, Everloy Co., 002K),which contained 0.5 w% cobalt (Co), was used to build the mold. The mold surface was ultra-precision ground and polished, and its form accuracy (PV) was 0.85um in aspheric surface. We selected four factors, pressing temperature, force and time of first step, and force of second step, respectively, as the parameters of the pressing process. in order to reduce the number of experiments, we applied fractional factorial design considering the main effects and two-way interactions. The analysis results indicate that the only two main effects, the pressing temperature and the time of pressing step 1, are available for the form accuracy (PV) of the molded lens. The analysis results indicated that the best combination of the factors for lowering the form accuracy(PV) value of molded lens was to have them at their low levels.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.363-366
• /
• 2008

The transcription characteristics in the molding of aspheric glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. The molded lens showed a transcription ratio of 93.4%, which is obtained by comparing the form accuracy (PV) values of the mold and the molded lens. The transcription of the roughness topography was ascertained by bearing ratio analysis.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 춘계학술대회
• /
• pp.320-323
• /
• 2011

Smart phone에 실장되는 소형 카메라 모듈의 경우, 기존 Handset과 대비하여 Non AF 상태에서의 해상도 수준의 향상에 대한 소비자의 요구가 커지고 있으며, 높은 정밀도와 동일한 반복성 및 빠른 Auto focusing speed를 요구 받고 있다. 이에 따라 기존의 Actuator mechanical position에 기반한 algorithm에서 문제가 되었던 preview(non-AF)의 안정적 해상도 보증 문제 및 속도 개선 한계 문제를 본 논문에서 개선된 algorithm으로 제안하게 되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.336-336
• /
• 2008

The transcription characteristics in the molding of aspheric glass lenses for camera phone modules have been investigated experimentally. The surface topographies of both the form and the roughness were compared between the mold and the molded lens. The molded lens showed a transcription ratio of 93.4%, which is obtained bycomparing the form accuracy (PV) values of the mold and the molded lens. The transcription of the roughness topography was ascertained by bearing ratio analysis.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.482-486
• /
• 2007

카메라폰의 비중이 증가함에 따라 카메라 모듈, 회전힌지 모듈, CCP 등 전용부품 시장이 확대되어 높은 성장을 유지했다. 동시에 카메라폰의 다기능화 및 고화소화로 인하여 카메라폰 대당 출하가격에서 전용부품이 차지하는 비중이 점차 높아지고 있으므로 휴대폰 카메라 모듈 기술에 대한 현황 및 시장 상황을 파악하여 카메라 모듈 기술의 사업화 전략에 활용하고자 한다.

• International journal of advanced smart convergence
• /
• 제4권2호
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.

• 한국인터넷방송통신학회논문지
• /
• 제22권4호
• /
• pp.103-109
• /
• 2022

수면 중 발생되는 영유아의 높은 사망률 때문에 영유아 케어에 대한 중요성이 대두되고 있다. 본 연구에서는 블루투스 기술을 이용하여 스마트폰 으로 제어되는 Infant Care 디바이스의 초기 모델을 개발하였다. 개발된 모델은 MCU, 가속도 센서, 온도 측정 센서, 소리 센서, 블루투스 모듈, 카메라 모듈로 구성된다. 개발된 어플리케이션과 블루투스 기술을 사용하여 측정된 유아의 낙상 감지 신호 정보, 울음 감지 신호 정보, 발열 감지 신호 정보를 부모의 스마트폰과 컴퓨터 모니터를 통해 표출 하였다. Bluetooth Low Energy를 이용하여 저 전력 구동을 구현함으로서 구현된 Infant Care 시스템의 초기 설계모델의 유용성에 대해 확인 하였다.