• Journal of the Korean Wood Science and Technology
• /
• 제15권1호
• /
• pp.1-11
• /
• 1987

소나무 크라프트 펄프제조과정중 회수된 폐액으로 Black liquor-phenol formaldehyde. Methylolated kraft lignin-phenol formaldehyde 및 Lignin cake-phenol rein 세 종류의 접착제가 제조되었다. Black liquor-phenol formaldehyde resin 제조시 Phenol의 약 60%를 크라프트 폐액으로 대치할 수 있다. 본 접착제의 최적압착조건은 $160^{\circ}C$에서 7분간이였다.(상태접착력 : 15.77kg/$cm^2$ 내수접착력 : 8.54kg/$cm^2$). Methylolated kraft lignin-pheno] formaldehyde resin 제조시 Phenol의 약 80~90%를 Methylolated kraft lignin으로 대용할 수 있었다. 본 접착제 제조시 pH를 2.6 용매로서 Methanol, 접착제 1g 당 $0.2m\ell$ Formaldehyde를 첨가하는 것이 접착력이 가장 높았다(상대접착력 : 18.54kg/$cm^2$, 내수 접착력 : 10.08kg/$cm^2$. Lignin cake-phenol ressin에서 Phenol양과 Kraft lignin양이 1 : 1일 경우에 접착력이 높았다. 본 접착제의 최적 압착조건은 $150^{\circ}C$에서 4분간이었다.(상태 접착력 : 18.46kg/$cm^2$, 내수접착력 : 12.3kg/$cm^2$).

• Journal of the Korean Wood Science and Technology
• /
• 제26권3호
• /
• pp.48-52
• /
• 1998

Residues such as walnut, pinenut and peanut shells were used as a filler in adhesive for bonding radiata pine plywood. The nutshell residues were prepared by simply drying to 8% moisture content and grinding the dry material using a laboratory Wiley mill with a $75{\mu}m$ (200 mesh) screen. The nutshells residues were compared to a commercial filler commonly used in adhesives by the structural plywood and laminated veneer lumber industry in the United States. The adhesive mixes were made by following the recommended procedure of Georgia-Pacific Resins, Inc., using phenol-formaldehyde resin. For each filler type, three-ply plywoods, 6 mm nominal thickness and 30 by 30 cm in size, were fabricated at two press times (4 and 5 min) and around 30 minute assembly time. Evaluations of the nutshell residues were carried out by tension shear tests after cyclic boil tests on plywood. The results of the performance test included tension shear strength and wood failure. All plywoods made with the nutshell fillers were comparable to those made with the control filler. These results indicate that nutshell residues would be suitable as filler for plywood adhesives.

• Journal of the Korean Wood Science and Technology
• /
• 제24권2호
• /
• pp.15-19
• /
• 1996

To utilize the waste materials and develope wood adhesive from isolated bloods of slaughtered cow and pig and also to prevent water pollution, simple and rapid method of isolation and purification of plasma proteins from pig bloods with trichloroacetic acid(TCA) treatment was developed. Adding of TCA-precipitated blood powder to the phenol formaldehyde resin(PF) improved dry and wet strength of plywood and resulted in fast hot pressing times.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.14-18
• /
• 1998

A low density polyethylene(LDPE) was examined as an additive in phenol-formaldehyde(PF) resin adhesive for bonding radiata pine plywood. The LDPE was supplied by the commercial manufacturer. The LDPE was compared to a commercial filler commonly used in structural plywood adhesives in the United States. The adhesive mixes were made by following the recommended procedure of Georgia-Pacific Resins Inc.. using plywood-type PF resin. A total of 48 three-ply plywoods. 6.3 mm nominal thickness and 30 by 30 em in size, were made at two press times (4 and 5 min). two press temperatures (150 and $160^{\circ}C$) and 30 minute assembly times for four adhesive mixing types. Evaluations of the LDPE addition were carried out by performance tension shear tests after two cycle boil aging tests on plywood per the U.S. Product Standard PS I-83. After accelerated-aging tests. plywoods were exhibited no delamination. The test results included tension shear strength and estimated wood failure values. The plywood test results support the use of polyethylene as an additive in plywood adhesives.

• Journal of the Korean Wood Science and Technology
• /
• 제51권1호
• /
• pp.14-22
• /
• 2023

Economical use of larix (larch) boards (grade 3) in industries is lower than that of imported hardwood; thus, studies have been conducted toward performance improvement of larix boards. Herein, flexural modulus of larix board samples laminated with wood adhesives polyurethane resins, poly (vinyl acetate) resins, phenol-resorcinol-formaldehyde resins, melamine-formaldehyde resins, and urea-formaldehyde resins was compared with that of the samples bonded with adhesives reinforced with mesh-type basalt fibers. Moreover, the flexural moduli of the laminated samples bonded by mesh-type basalt fibers were compared with those of reinforced samples. The results showed that boards laminated with polyurethane and urea-formaldehyde resin adhesives had higher flexural modulus than those without the lamination. In particular, the increase in the flexural modulus was relatively significant for the 2- and 3-ply board structures laminated with polyurethane adhesives compared to those with reinforcement. The 3-ply board structure without reinforcement had the highest flexural modulus when the urea-formaldehyde resin adhesive was used.

• 임산에너지
• /
• 제24권1호
• /
• pp.28-32
• /
• 2005

목탄의 제조 과정 중 얻어지는 목타르의 활용방안을 모색코자 페놀수지에 목타르를 혼합하여 합판을 제조하여, 물리적, 기계적 및 포름알데히드 방출성능을 조사하였다. 목타르를 혼합하여 제조된 합판의 경우, 목타르를 혼합하지 않은 합판에 비해 물리적, 기계적인 면에서 별다른 감소를 보이지 않았으며, 인장전단 접착력은 비내수, 내수 모두 목타르의 혼합으로 인하여 오히려 향상되는 것으로 나타났다. 또한 포름알데히드 방출량에서도 목타르의 첨가는 방출량을 감소시키는 것으로 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.682-690
• /
• 2015

The bonding performance of two types of wood adhesives, namely phenol-resorcinol-formaldehyde (PRF) resin and melamine-urea-formaldehyde (MUF) resin for glued laminated timber manufactured by high frequency (HF) heating was evaluated. The HF heating system consists of HF oscillator with dielectric heating system for curing adhesives, and hydraulic press system for clamping glued laminated timber. The designed frequency and output power of the HF system was as 5 MHz and 60 kW, respectively. To verify dielectric heating mechanism under HF oscillation, the heat loss factors of laminae and adhesives were measured. The results show that it is possible to selectively heat adhesives for their curing due to the remarkably higher loss factor of the adhesives than those of wood laminae. The temperature of adhesive in the bonding line reached up to the set temperature within a few seconds by high frequency oscillating, which advanced the curing of adhesive afterwards. The bonding performance, such as shear strength of bonding line, water soaking delamination, and boiling water soaking delamination of PRF resin met the requirement of Korean Standard (KS), however the MUF resin did not meet the KS requirement of boiling water soaking delamination. These results indicate that the HF heating system is successful to manufacture glued laminated timbers with PRF resins to meet the bonding requirements.

• Journal of the Korean Wood Science and Technology
• /
• 제37권4호
• /
• pp.388-396
• /
• 2009

본 연구에서는 두부비지 가수분해물과 페놀수지로 조제된 마루판 화장용 접착제의 접착성능을 확인하기 위하여 수행하였다. 먼저 두부비지를 황산과 수산화나트륨으로 화학적으로 개량한 후 가교제로 phenol formaldehyde (PF) prepolymer와 혼합하여 접착제를 조제하였는데, 이 접착제는 고형분 함량을 기준으로 35%의 황산 가수분해물(AC), 35%의 수산화나트륨 가수분해물(AK) 그리고 30%의 PF로 조제하였다. 이렇게 조제된 접착제를 고밀도섬유판에 $300g/m^2$의 비율로 도포한 후 참나무 무늬목을 접착시켜 $7kg/m^2$의 압력으로 $120^{\circ}C$에서 열압하여 마루판을 제조하였다. 제조된 마루판에 대하여 formaldehyde/phenol 몰비(1.8, 2.1, 2.4), 퇴적시간(0분, 10분, 20분), 열압시간(90초, 120초)이 평면인장강도, 준내수 박리율, 포름알데히드 방산량에 미치는 영향에 대해 조사하였다. 두부비지 접착제를 이용하여 제조된 목질마루판의 평면인장강도는 KS 규격의 최소값을 상회하였으며, 대부분의 포름알데히드 방산량 값은 KS 규격의 E0 기준에 근접하는 것으로 나타났다. 따라서 두부비지 접착제가 마루판 화장용 접착제로 사용될 수 있다는 가능성을 보여 주었으나, 상용화를 위하여 내수성의 향상과 포름알데히드 방산량의 저감을 위한 연구가 필요할 것으로 생각한다.

• 대한화학회지
• /
• 제20권3호
• /
• pp.240-243
• /
• 1976

리그닌을 알칼리로 活性化시키고 페놀 및 포름알데히드와 反應시켜 새로운 樹脂를 合成하였다. 合成된 樹脂는 木材의 接着劑로 쓸 수 있는 충분한 强度를 가졌음을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제39권1호
• /
• pp.21-27
• /
• 2011

This study was carried out to examine properties of water resistant plywood by using serum protein adhesive which is natural, environment-friendly and human-friendly. For the preparation of the serum protein adhesive, pig blood from slaughterhouse was centrifuged and serum was separated from corpuscles and concentrated to 30% by dry weight basis. This concentrated serum protein was modified with PF resin (50% NVC) with the ratio of 9 : 2.5. Plywood made by this modified serum protein gave 1.21 N/$mm^2$ of dry bonding strength, 0.80 N/$mm^2$ of wet boil bonding strength, 0% of cyclic delamination test value, and 0.025 ppm of HCHO emission, which met the excellent super $E_0$ grade and water resistant plywood.