• 제목/요약/키워드: phase separator

검색결과 55건 처리시간 0.032초

태양광(太陽光) 산업(産業)에서 발생(發生)하는 Si/SiC 혼합물(混合物)의 소결특성(燒結特性) 연구(硏究) (Sintering Characteristics of Si/SiC Mixtures from Si Waste of Solar Cell Industry)

  • 권우택;김수룡;김영희;이윤주;김종일;이현재;오세천
    • 자원리싸이클링
    • /
    • 제22권3호
    • /
    • pp.28-35
    • /
    • 2013
  • 태양광 산업에서 폐기물로 발생하는 Si/SiC 혼합슬러지를 재활용하는 것은 환경과 경제적인 측면에서 중요하다. 이러한 재활용을 위해서 Si/SiC 혼합물의 소결특성을 분석하는 것이 필요하다. 본 연구에서는 SiC함량에 따른 소결특성을 살펴보기 위해서 공기분급기를 이용하여 Si/SiC 혼합물에서 SiC 함량을 변화시켰다. SiC 함량이 변화된 Si/SiC 혼합물에 카본블랙, 점토 및 수산화알루미늄을 첨가하여 소결하였다. Si/SiC 혼합물의 특성분석 및 첨가제 변화에 따른 Si/SiC 혼합물 소결체의 특성변화를 SEM, XRD, 입도분석 및 겉보기 밀도변화를 측정하여 분석하였다. SEM 및 입도분석결과, SiC 95% 시료의 경우에는 원시료 및 SiC 75% 시료와 비교하여 1 ${\mu}m$ 크기 이하의 미립입자가 크게 감소하여 공기분급을 통한 미세입자 제거가 SiC 함량 제어에 효과가 있음을 확인할 수 있었다. 수산화알루미늄을 첨가함에 따라서 ${\beta}$-Cristobalite 가 감소하고 mullite 생성량이 증가하였으며, 카본블랙의 첨가가 소결특성 향상에 영향을 주는 것을 확인하였다.

액체질소 분사 안정화를 통한 극저온가공 품질 향상 (Improvement of the Quality of Cryogenic Machining by Stabilization of Liquid Nitrogen Jet Pressure)

  • 강명구;민병권;김태곤;이석우
    • 한국정밀공학회지
    • /
    • 제34권4호
    • /
    • pp.247-251
    • /
    • 2017
  • Titanium alloy has been widely used in the aerospace industry because of its high strength and good corrosion resistance. During cutting, the low thermal conductivity and high chemical reactivity of titanium generate a high cutting temperature and accelerates tool wear. To improve cutting tool life, cryogenic machining by using a liquid nitrogen (LN2) jet is suggested. In cryogenic jet cooling, evaporation of LN2 in the tank and transfer tube could cause pressure fluctuation and change the cooling rate. In this work, cooling uniformity is investigated in terms of liquid nitrogen jet pressure in cryogenic jet cooling during titanium alloy turning. Fluctuation of jet spraying pressure causes tool temperature to fluctuate. It is possible to suppress the fluctuation of the jet pressure and improve cooling by using a phase separator. Measuring tool temperature shows that consistent LN2 jet pressure improves cryogenic cooling uniformity.

혼합냉매의 성분비 조절을 통한 열펌프의 용량조절 (Capacity Modulation of a Heat Pump System by Changing the Composition of Refrigerant Mixtures)

  • 김민성;김민수;김용찬
    • 설비공학논문집
    • /
    • 제12권3호
    • /
    • pp.258-266
    • /
    • 2000
  • Experimental investigation and cycle simulation of a capacity modulation of a heat pump system using a hydrofluorocarbon (HFC) refrigerant mixture, R32/134a as an alternative to R22, have been done. In the cycle simulation, the refrigeration system was operated by assigning the temperatures of the external heat transfer fluids with the heat exchangers generalized by an average effective temperature difference. Heating capacity, cooling capacity, and coefficient of performance (COP) of the system were investigated at several operating conditions. Experimental apparatus which had a refrigeration part and a composition changing part was built, and the performance of the heat pump system filled with R32/134a mixture was investigated. A gas-liquid separator was used in the experiment to change the composition by collecting the vapor and the liquid Phase separately, The mass fraction of the charged refrigerant in the heat pump system was 40/60 and 70/30 by weight percentage. The composition of the refrigerant with initial composition of 40/60 varied from 29/71 to 41/59 in the refrigeration cycle. For the refrigerant with initial composition of 70/30, the composition varied from 65/35 to 75/25.

  • PDF

수평 T형 증발관내 2상류의 유량분배 및 압력강하 특성 (Characteristics of T-phase flow distribution and pressure drop in a horizontal T-type evaporator tube)

  • 박종훈;조금남;조홍기
    • 설비공학논문집
    • /
    • 제11권5호
    • /
    • pp.658-668
    • /
    • 1999
  • The objective of the present study is to investigate the effect of experimental parameters on the hydrodynamic characteristics in a horizontal tee-type evaporator using R-22. The experimental apparatus consisted of an unheated tee-type test section, a liquid-vapor separator, a preheated, mass flow meters, a plate heat exchanger, pump, and other measurement devices. The experimental parameters were mass flux(500 and 600kg/$m^2$s), inlet quality(0.1~0.3) and separation ratio(0.3~0.7). Absolute pressure at the inlet of the test section was 0.652 MPa. The branch-to-inlet inner diameter ratio was 0.61. Pressure gradient at the branch section was larger than that at the run section at the same separation ratio. Pressure drop per unit length increased at the run section and decreased at the branch section as the separation ratio increased. Pressure drop predicted by the separated flow model agreed with experimental data within -35 to +16%. Generally, predicted values showed similar trend with the data. Mass flow ratio of vapor refrigerant was affected by the inlet quality more than the mass flux.

  • PDF

나노섬유 분리막의 최근 연구개발동향 (Current R&D Trend of Nanofiber Membranes)

  • 김태헌
    • 멤브레인
    • /
    • 제22권6호
    • /
    • pp.395-403
    • /
    • 2012
  • 분리막에 대한 지속적인 성장과 더불어 나노섬유 분리막은 현재 기체, 수처리, 에너지 등 다양한 분야에서 활발히 연구가 진행되고 있다. 나노섬유를 제조하는 방법에는 연신(drawing), 템플레이트 합성(template synthesis), 상분리(phase separation), 자가조립(self-assembly), 전기방사(electrospinning)법이 있으며, 특히, 전기방사법은 다른 제법들에 비해 높은 생산성과 생산비용이 낮은 장점이 있다. 또한, 재료의 선택성이 용이하며, 높은 비표면적과 기능기 추가가 용이하다. 분리막에 있어서 나노섬유의 적용은, 이차전지분야에서 기존의 PP, PE 혹은 PE/PP 격리막 위에 나노섬유를 도포함으로써 고온에서 안정성과 고출력을 가진 분리막을 개발할 수 있으며, 수처리 분야에서는 나노섬유 사이에 항균성 물질 등 다양한 첨가제를 추가하여 고기능성 분리막을 개발할 수 있다. 따라서 나노섬유 분리막은 에너지 분야에서 수처리 분야에 이르기까지 다양한 용도에 활용가능하며, 다양한 기능성의 발현으로 고부가 가치가 기대된다.

이차전지용 미세다공성 PVdF 분리막의 제조와 물성 (Preparation and Characterization of Microporous PVdF Membrane for Li-ion Rechargeable Battery)

  • 남상용;유대현;정미애;임지원;변홍식;정철호;이영무;서명수
    • 멤브레인
    • /
    • 제17권3호
    • /
    • pp.233-243
    • /
    • 2007
  • 본 연구에서는 충전용 이차전지의 분리막으로 쓰이는 다공성 막을 기존의 분리막 재료보다 뛰어난 물성을 나타내는 PVdF(poly(vinylidene fluoride))를 사용하여 상전이 방법으로 제조하였다. 용매인 DMF(N,N-dimethylformamide)에 PVdF를 단일상으로 녹인 후 깨끗한 유리판에 캐스팅하여 막을 얻었다. 얻어진 분리막에서 가장 높은 공극률은 78.6%로 얻어졌다. UTM(universal testing machine)을 이용하여 측정된 분리막의 인장강도는 PVdF 20 wt%에서 5.16 MPa의 값을 나타내었다. 시차주사현미경(scanning electron microscopy, SEM)을 이용하여 분리막의 단면 관찰을 통해 다공성을 확인하였다.

120℃ 스팀 생성을 위한 100 kW급 히트펌프의 실험적 연구 (Experimental Study on Heating Performance Characteristic of 100 kW Heat Pump to Generate ℃ Steam)

  • 왕은석;나선익;이길봉;백영진;이영수;이범준
    • 설비공학논문집
    • /
    • 제30권2호
    • /
    • pp.100-106
    • /
    • 2018
  • Recently, the development of a heat pump technology to recover process waste heat and to generate steam of $120^{\circ}C$ or higher required for industrial processes, has attracted attention. The research of conventional heat pump utilizing the available energy is used primarily for air conditioning, and the production temperature is about $60^{\circ}C$, so it is difficult to utilize it for industrial use. Therefore, in this study, we developed a steam heat pump (SGHP) which recovers the waste heat of process and generates steam at $120^{\circ}C$. The low-pressure refrigerant R245fa, considered to be an eco-friendly refrigerant, has been selected as the refrigerant for SGHP in this study since its Ozone Depletion Potential (ODP) is zero and the Global Warming Potential (GWP) is relatively low. A flash tank functioning as a phase separator was installed in the rear stage of the condenser, and the saturated water of high temperature was decompressed to generate steam. It was started at the initial temperature of $70^{\circ}C$, and it was confirmed that $120^{\circ}C$ steam was produced after the system stabilized. We have conducted experiments by modifying the system, and ultimately achieved a heating capacity of 101.4 kW and a COP of 3.05.

변형된 창함수를 사용한 FIR 디지털 필터에 관한 연구 (A Study on the FIR Digital Filter using Modified Window Function)

  • 강경덕;배상범;김남호;류지구
    • 융합신호처리학회논문지
    • /
    • 제4권1호
    • /
    • pp.49-55
    • /
    • 2003
  • 현대산업사회의 발전에 따라 신호처리 분야 중 디지털필터의 사용은 급격히 증가하고 있으며, 특히 디지털 영상처리, 디지털 음성처리, CATV 및 각종 통신 분야 등에서 카메라의 Detail processor, Y/C separator, Ghost제거 필터, 표준변환기(NTSC-PAL), Noise reducer 등으로 많이 사용되고 있다. 이러한 디지털필터에는 일반적으로 IIR(infinite impulse response)과 FIR(finite impulse response) 필터가 있으며, 본 논문에서는 구현이 용이하고 선형위상특성을 갖는 FIR 디지털필터를 설계하였다. FIR 디지털필터 설계에 있어서 통과대역의 차단주파수 부근에서 깁스(gibbs) 현상에 의해 생긴 리플을 완화하기 위해 window함수를 사용한다. 그러나, 기존의 window는 고정된 값으로 되어 있으므로 설계목적에 적합한 window함수를 선택함에 있어 다소 문제점이 있다. 따라서, 본 논문에서는 설계목적에 따라 서 융통성있게 선택이 가능한 파라메터를 부가한 변형된 Hanning window를 설계하였으며, 타당성을 입증하기 위해 디지털필터를 설계하여 기존의 Hamming, Hanning, Blackman, Kaiser window와 비교하였으며, 판단기준으로 peak side-lobe와 천이특성 등을 사용하였다.

  • PDF

Poly(vinylidene fluoride-hexafluoropropylene)를 이용한 이차전지용 미세다공성 분리막의 제조와 물성 (Preparation and Characterization of PVdF-HFP Microporous Membranes for Li-ion Rechargeable Battery)

  • 남상용;유대현;정미애;임지원;변홍식;유현오;김종만;서명수
    • 멤브레인
    • /
    • 제17권4호
    • /
    • pp.359-368
    • /
    • 2007
  • 본 연구에서는 불소계 고분자인 PVdF (poly(vinylidene fluoride))에 HFP (hexafluoropropylene)가 결합된 공중합체인 PVdF-HFP로 충전용 이차전지의 분리막으로 쓰이는 다공성 막을 상전이 방법으로 제조하였다. 용매인 DMF (N,N-dimethylformamide)에 PVdF-HFP를 단일상으로 녹인 후 깨끗한 유리판에 캐스팅하여 막을 얻었다. 기공은 증류수로 채워진 응고조에서 용매-빈용매 교환으로 형성되어진다. 얻어진 분리막에서 가장 높은 공극률은 60%로 얻어졌다. 시차주사현미경(scanning electron microscopy, SEM)을 이용하여 분리막의 단면 관찰을 통해 다공성을 확인하였고 UTM (universal testing machine)을 이용하여 측정된 분리막의 인장강도는 PVdF-HFP 30 wt%에서 최대 6.57 MPa의 값을 나타내었다.

에어로졸 증착법을 이용한 광촉매 TiO2 박막 제조 및 박막의 여과 특성 (Fabrication of Photocatalytic TiO2 thin Film Using Aerosol Deposition Method and its Filtration Characteristics)

  • 최원열;이진우;김시준;김종오
    • 한국지반환경공학회 논문집
    • /
    • 제11권1호
    • /
    • pp.5-11
    • /
    • 2010
  • 본 연구에서는 에어로졸 증착법을 사용하여 광촉매 $TiO_2$ 박막을 제조하기 위하여 원심분리기의 회전속도, vibration milling 시간에 의한 입경 변화 등과 같은 운전인자의 영향을 검토하였고, 제조된 고정화 $TiO_2$ 광촉매 박막의 경우와 $TiO_2$ 광촉매 분말을 부유 상태로 존재시킨 경우와의 막투과 특성의 변화를 실험적으로 비교검토 하였다. 원심분리기의 회전속도 1000-3000rpm 에서 얻어진 $TiO_2$ 분말은 저온 분사 성형법(aerosol deposition, AD)으로 $TiO_2$ 박막을 제조하는데 있어서 nozzle powder 막힘 현상과 같은 문제점을 나타내었다. 한편, vibrating milling에 의해 제어된 $TiO_2$ 분말의 평균입경 크기는 vibrating milling 2시간 후 약 420nm로 AD법을 이용한 입자의 증착에 효과적인 것으로 나타났다. XRD 분석 결과, 광촉매에 효과적인 아나타제 상을 잘 유지하고 있는 것으로 나타났으며, 이러한 결과로부터 vibrating milling은 $TiO_2$ 분말을 제어하는데 있어 적절한 전처리 공정임을 확인할 수 있었다. 제조된 $TiO_2$ 박막의 여과 특성으로 $TiO_2$ 분말을 분리막의 표면에 고정화 한 경우가 부유 상태일 경우보다 더 높은 막투과 유속을 나타내었다.