• Korean Journal of Geomatics
• /
• v.4 no.2
• /
• pp.47-52
• /
• 2004

We can process and compute the position, velocity and time by satellite signals of GPS. The signals are used to compute positioning of three dimensions and timing offset of the receiver clock when we can track the tour satellite signals at least. One of the specified aims is to use less expensive single frequency code/carrier phase GPS receivers, which are typically around half the price of dual frequency receivers. In the study, the author analyzed the accuracy and applicability of frequence linear combination using triangulation points evaluated distance limitation.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.11
• /
• pp.1410-1416
• /
• 1999

This paper aims at investigating the operating-mode characteristics of two-module Thyristor Controlled Series Compensator (TCSC) as an equivalent of the multi-module TCSC in a simple three-phase power transmission system. The load flow program is developed to analyze the steady-state characteristics of two-module TCSC system and to find the thyristor firing angles for the required real power flow. The stability calculation program is developed with Poincare mapping theory. Simulation studies of the TCSC power transmission system using EMTP are performed to evaluate the transient characteristics of two-module TCSC as a real power flow controller and to rpove the results of the load flow calculation and the stability analysis. In the process of the study, the operating-mode characteristics of two-module TCSC are evaluated and compared to those of single-module TCSC.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.6
• /
• pp.128-136
• /
• 1995

The problem addressed in this paper is that of the on-line computational burden of time-optimal control laws for quick, strongly nonlinear systems like revolute robots. It will be demonstrated that a large amount of off-line computation can be substituted for most of the on-line burden in cases of time optimization with constrained inputs if differential point-to- point specifications can be relaxed to cell-to-cell transitions. These cells result from a coarse discretization of likely swaths of state space into a set of nonuniform, contiguous volumes of relatively simple shapes. The cell boundaries approximate stream surfaces of the phase fluid and surfaces of equal transit times. Once the cells have been designed, the bang- bang schedules for the inputs are determined for all likely starting cells and terminating cells. The scheduling process is completed by treating all cells into which the trajectories might unex- pectedly stray as additional starting cells. Then an efficient-to-compute control law can be based on the resulting table of optimal strategies.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.11
• /
• pp.118-121
• /
• 1996

This paper describes ECG signal labeling based on Fuzzy clustering, which is necessary at automated ECG diagnosis. The NPPA(Non parametric partitioning algorithm) compares the correlations of wave forms, which tends to recognize the same wave forms as different when the wave forms have a little morphological variation. We propose to apply Fuzzy clustering to ECG QRS Complex labeling, which prevents the errors to mistake by using If-then comparision. The process is divided into two parts. The first part is a parameters extraction process from ECG signal, which is composed of filtering, QRS detection by mapping to a phase space by time delay coordinates and generation of characteristic vectors. The second is fuzzy clustering by FCM(Fuzzy c-means), which is composed of a clustering, an assessment of cluster validity and labeling.

• Korean Management Science Review
• /
• v.33 no.3
• /
• pp.53-64
• /
• 2016

The government is mapping out R&D innovation measures aimed at improving the qualitative level of the performance of national R&D projects that are supported by grants or public funds. This paper proposes ways of making improvements in technology planning, project assessment, performance management, and results evaluation in order to boost the efficiency of the country's promotion of ICT R&D projects, as well as to upgrade the processes involved with its technological innovation system at each of the commercialization stages of its R&D projects. According to our experts' in-depth survey and interview, it has been found that technology planning is the most important phase in the full cycle-based technological innovation system and that the promotion of a combination of top-down and bottom-up approaches is the most reasonable. This paper also suggests it is necessary to secure a process for exploring technological opportunities as the preparatory phase for technology planning, and that it is desirable to reflect the technology demand map associated with the technology road map. Currently, R&D projects are divided into policy designation, designation contest, and free contest. To minimize the inefficiency associated with indiscriminate competition, this paper proposes the introduction of a general contest system in order to change the project assessment system into one based on the results of the competition in each category(e.g. firms, universities, research institutions, etc.).

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.10
• /
• pp.65-70
• /
• 2019

In recently, ship trajectory data consisting of ship position, speed, course, and so on can be obtained from the Automatic Identification System device with which all ships should be equipped. These data are gathered more than 2GB every day at a crowed sea port and used for analysis of ship traffic statistic and patterns. In this study, we propose a method to process ship trajectory data efficiently with distributed computing resources using MapReduce algorithm. In data preprocessing phase, ship dynamic and static data are integrated into target dataset and filtered out ship trajectory that is not of interest. In mapping phase, we convert ship's position to Geohash code, and assign Geohash and ship MMSI to key and value. In reducing phase, key-value pairs are sorted according to the same key value and counted the ship traffic number in a grid cell. To evaluate the proposed method, we implemented it and compared it with IALA waterway risk assessment program(IWRAP) in their performance. The data processing performance improve 1 to 4 times that of the existing ship trajectory analysis program.

• Proceedings of the Korea Society for Simulation Conference
• /
• 1994.10a
• /
• pp.32-32
• /
• 1994

In this example, a message passing based multicomputer system with general interdonnedtion network is considered. After multicomputer systems are developed with morm-hole routing network, topologies of interconecting network are not major considertion for process management and resource sharing. Tehre is an independeent operating system kernel oneach node. It communicates with other kernels using message passingmechanism. Based on this architecture, the problem is how mech does performance degradation will occur in the case of processor sharing on multicomputer systems. Processor sharing between application programs is veryimprotant decision on system performance. In almost cases, application programs running on massively parallel computer systems are not so much user-interactive. Thus, the main performance index is system throughput. Each application program has various communication patterns. and the sharing of processors causes serious performance degradation in hte worst case such that one processor is shared by two processes and another processes are waiting the messages from those processes. As a result, considering this problem is improtant since it gives the reason whether the system allows processor sharingor not. Input data has many parameters in this simulation . It contains the number of threads per task , communication patterns between threads, data generation and also defects in random inupt data. Many parallel aplication programs has its specific communication patterns, and there are computation and communication phases. Therefore, this phase informatin cannot be obtained random input data. If we get trace data from some real applications. we can simulate the problem more realistic . On the other hand, simualtion results will be waseteful unless sufficient trace data with varisous communication patterns is gathered. In this project , random input data are used for simulation . Only controllable data are the number of threads of each task and mapping strategy. First, each task runs independently. After that , each task shres one and more processors with other tasks. As more processors are shared , there will be performance degradation . Form this degradation rate , we can know the overhead of processor sharing . Process scheduling policy can affects the results of simulation . For process scheduling, priority queue and FIFO queue are implemented to support round-robin scheduling and priority scheduling.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.363-370
• /
• 2007

In this paper, we propose a flexible turbo decoding algorithm for a high order modulation scheme that uses a standard half-rate turbo decoder designed for binary quadrature phase-shift keying (B/QPSK) modulation. A transformation applied to the incoming I-channel and Q-channel symbols allows the use of an off-the-shelf B/QPSK turbo decoder without any modifications. Iterative codes such as turbo codes process the received symbols recursively to improve performance. As the number of iterations increases, the execution time and power consumption also increase. The proposed algorithm reduces the latency and power consumption by combination of the radix-4, dual-path processing, parallel decoding, and early-stop algorithms. We implement the proposed scheme on a field-programmable gate array and compare its decoding speed with that of a conventional decoder. The results show that the proposed flexible decoding algorithm is 6.4 times faster than the conventional scheme.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2003.10a
• /
• pp.221-228
• /
• 2003

This paper presents a novel method that can identify the individual's haplotype from the given genotypes. Because of the limitation of the conventional single-locus analysis, haplotypes have gained increasing attention in the mapping of complex-disease genes. Conventionally there are two approaches which resolve the individual's haplotypes. One is the molecular haplotypings which have many potential limitations in cost and convenience. The other is the in-silico haplotypings which phase the haplotypes from the diploid genotyped populations, and are cost effective and high-throughput method. In-silico haplotyping is divided into two sub-categories - statistical and computational method. The former computes the frequencies of the common haplotypes, and then resolves the individual's haplotypes. The latter directly resolves the individual's haplotypes using the perfect phylogeny model first proposed by Dan Gusfield [7]. Our method combines two approaches in order to increase the accuracy and the running time. The individuals' haplotypes are resolved by considering the MLE (Maximum Likelihood Estimation) in the process of computing the frequencies of the common haplotypes.

• Progress in Superconductivity
• /
• v.6 no.2
• /
• pp.95-98
• /
• 2005

We present results of Raman spectroscopic studies of superconducting $YBa_2Cu_3O_7$ (YBCO) coated conductors. Raman scattering is used to characterize optical phonon modes, oxygen content, c-axis misalignment, and second phases of the YBCO coated conductors at a micro scale. A two-dimensional mapping of Raman spectra with transport properties has been performed to elucidate the effect of local propertied on current path and superconducting phase. The information taken from the local measurement will be useful for optimizing the process condition.