• 제목/요약/키워드: phase difference

검색결과 3,107건 처리시간 0.03초

진폭 변조 거리 측정 시스템을 위한 정밀 위상차 측정부 개발 (The Phase Difference Measurement Module Development for Amplitude Modulated Range Measurement System)

  • 노형우;박정호;강일흥;최문각;김강욱
    • 한국전자파학회논문지
    • /
    • 제22권2호
    • /
    • pp.182-190
    • /
    • 2011
  • 진폭 변조를 이용한 거리 측정 시스템은 반송파를 진폭 변조하여 송수신한 신호의 진폭 변조 신호의 위상차를 사용하여 거리를 측정하게 된다. 진폭 변조 거리 측정 시스템에서 문제가 되는 안테나 간의 누설 신호 및 불요 신호에 의한 측정 오차를 최소화하기 위해 능동반사기를 사용하여 주파수 대역을 바꾸어 송신하는 방식이 제안되었다. 본 논문에서는 모호성이 없는 측정 거리를 확장하면서도 정밀한 측정을 가능하게 하는 새로운 위상측정부의 구현에 대해 설명하고 있다. 즉, 8 MHz 및 1 MHz의 두 개의 변조 주파수를 교차적으로 선택하여 변조함으로써, 150 m까지의 거리를 2 cm 이하의 오차로서 측정할 수 있게 하였다. 위상측정부는 정밀한 위상 측정을 위하여 높은 변조 주파수는 JK 플립플롭 위상차 측정기를 사용하고, 낮은 변조 주파수일 경우는 XOR 위상차 측정기를 사용하였다.

사전동작이 좌우 반응 추진운동의 수행력에 미치는 영향 (Effects of Preparatory Movements on Performance of Sideward Responsive Propulsion Movement)

  • 김용운;윤태진;서정석
    • 한국운동역학회지
    • /
    • 제15권3호
    • /
    • pp.9-19
    • /
    • 2005
  • The purpose of this study was to analyze the effects of three different types of preparatory movement(squat, countermovement and hopping) in sideward responsive propulsion movement. 7 healthy subjects performed left and right side movement task by external output signal. 3D kinematics were analyzed The results were followed First, performance time in the countermovement and hopping conditions was shorter(10-20%) than that in the squat condition. The hopping condition that is more related to pre-stretch showed excellent performance. Second, time difference between after turned on the external signal and until take off was the primary factor in performance results among movement conditions. The preparatory phase before the propulsive phase in the squat condition produced more time than that in other conditions. The hopping condition showed the most short time in both the preparatory and the propulsive phase, therefore it was advantage for performance result Third, significant difference was not found in take-off velocity among movement conditions although there was difference of the time required in the propulsive phase. The maximum acceleration in the propulsive phase was larger in order of the hopping. countermovement, and squat condition. The countermovement and hopping conditions showed high take-off velocity although the propulsive phase in those conditions was shorter than that in squat condition. The pre-stretch by preparatory countermovement was considered as the positive factor of producing power in concentric contraction. Fourth, the hopping condition produced large angular velocity of joints. In hopping condition, large amount of moment for rotation movement was revealed in relatively short time and it was considered to cause powerful joint movements. In conclusion, the hopping movement using countermovement is advantage of responsive propulsion movement. It is resulted from short duration until take off and large amount of joint moment and joint power in concentric contraction by pre-stretch.

Multi-scale Local Difference Directional Number Pattern for Group-housed Pigs Recognition

  • Huang, Weijia;Zhu, Weixing;Zhang, Zhengyan;Guo, Yizheng
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제15권9호
    • /
    • pp.3186-3203
    • /
    • 2021
  • In this paper, a multi-scale local difference directional number (MLDDN) pattern is proposed for pig identification. Firstly, the color images of individual pig are converted into grey images by the most significant bits (MSB) quantization, which makes the grey values have better discrimination. Then, Gabor amplitude and phase responses on different scales are obtained by convoluting the grey images with Gabor masks. Next, by calculating the main difference of local edge directions instead of traditionally edge information, the directional numbers of Gabor amplitude and phase responses are encoded. Finally, the block histograms of the encoded images are concatenated on each scale, and the maximum pooling is adopted on different scales to avoid the high feature dimension. Experimental results on two pigsties show that MLDDN impressively outperforms the other widely used local descriptors.

동일한 Methionine과 Lysine수준의 사료에서 단백질수준이 산란계의 생산성에 미치는 영향 (The Effects of Different Crude Protein Levels in Same Methionine and Lysine Diet on the Performance of Laying Hens)

  • 이상진;김삼수;정선부;곽종형;이규호;강태항
    • 한국가금학회지
    • /
    • 제18권2호
    • /
    • pp.67-84
    • /
    • 1991
  • 사료의 단백질 수준이 산란계의 산란기별 생산성에 미치는 영향을 구명하기 위하여 methionine수준을 0.32%, lysine수준을 0.64%로 동일하게 하였을 때 단백질 수준을 달리하는 4개 처리(CP 12%. 13%, 14% 및 15%)에 22주령의 갈색산란계 384수를 공시하여 1989년 1월 28일부터 1990년 3월 23일까지 60주간에 걸친 사양시험과 대사시험 결과를 요약하면 다음과 같다. 1. 산란율은 산란초기에는 단백질 15%, 산란중기에는 단백질 14%, 산란말기에는 단백질 13%수준에서 가장 높았으며, 산란초기와 산란중기 및 산란전기간에서는 처리간에 통계적인 유의성이 인정되었다 (P<0.05). 2. 난중은 단백질 15%와 14%수준간에는 유의적인 차이가 없었으나 그 이하의 수준에서는 단백질 수준이 낮아질수록 점차 감소하였으며, 산란초기(P<0.01), 산란중기 및 산란말기에 통계적인 유의성이 인정되었다(P<0.05). 3. 1일 1수당 산란량은 단백질 수준이 높아질수록 점차 증가하는 경향이었으며 산란초기와 산란중기에서는 고도의 유의성이 인정되었으나(P<0.01), 단백질 15%수준에 비하여 산란초기에는 14%, 산란중기에는 13% 및 산란말기에는 12%수준까지 큰 차이가 없었다. 4. 사료섭취량은 단백질 15%와 14%수준간에는 차이가 없었으나 13% 이하에서는 점차 감소하는 경향이었으며, 산란초기와 산란중기에서는 고도의 유의성이 인정되었다(P<0.01). 5. 사료요구율은 단백질 수준이 높아질수록 점차 개선되는 경향이었으며, 산란초기 (P<0.01)와 산란중기 및 산란전기간에서는 통계적인 유의성이 인정되었다(P<0.05). 6. 성계생존율은 단백질 수준이 높아질수록 점차 향상되는 경향이었으나 처리간에 통계적인 유의성은 인정되지 않았다. 7. 시험사료의 건물, 조단백질, 조지방 및 에너지의 이용율은 처리간에 차이가 없었으나, 탄수화물 이용율은 단백질 수준이 높아질수록 유의적으로 증가하는 경향이었다 (P<0.05). 8. 도체율과 복강지방 축적율은 처리간에 일정한 경향이나 유의차가 없었다. 9 난각질은 사료의 단백질 수준간에 유의적인 차이가 없었다. 10. 계란의 일반성분과 아미노산 조성은 사료중의 단백질 수준에 영향을 받지 않았다. 11. 산란 kg당 사료비는 단백질 13%수준에서 가장 절감되었으나 처리간 통계적인 유의성은 인정되지 않았다.

  • PDF

위성 변조 비콘 신호의 2위상 특성을 이용한 주파수 오프셋 보상방법에 대한 연구 (A Study on Frequency Offset Compensation using 2-Phase Characteristic of Beacon Signal modulated by Satellite)

  • 최철희
    • 한국인터넷방송통신학회논문지
    • /
    • 제18권1호
    • /
    • pp.97-103
    • /
    • 2018
  • 위성 변조 비콘 신호는 위성에서 생성한 TOD (Time of Day) 데이터를 gold sequence를 이용하여 확산 시킨 후 linear phase modulation을 통해 전송된다. 변조 비콘 신호를 수신 시 위성과 지상 수신기 간 특성 차이 때문에 주파수 오프셋(FO)이 발생한다. 기존 위성 변조 비콘 수신기는 변조 비콘 신호를 FFT(Fast Fourier Transform)를 이용하여 주파수를 동기화시키는 방법이며, 이는 시스템 구현 관점에서 딜레이 및 복잡도를 증가 시킬 뿐만 아니라 points 간 생기는 FO과 phase offset에 의한 위상차를 보정하는 별도의 회로가 필요하다. 본 논문에서는 이를 극복하기 위해 변조 비콘 신호의 2위상 성형된 특성을 이용하여 coarse FO와 phase offset을 한 번에 보정 및 복조하기 위한 방안과 그에 따른 하드웨어 구성도를 제안 및 분석하였다. 또한, 시뮬레이션을 통해 본 논문에서 제안하는 방식에 적합한 변조 지수(modulation index)를 분석하였으며 그에 따른 적정 누적 개수 또한 분석하였다.

All-Synthesizable 5-Phase Phase-Locked Loop for USB2.0

  • Seong, Kihwan;Lee, Won-Cheol;Kim, Byungsub;Sim, Jae-Yoon;Park, Hong-June
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권3호
    • /
    • pp.352-358
    • /
    • 2016
  • A 5-phase phase-locked loop (PLL) for USB2.0 applications was implemented by using an all-synthesis technique. The length of the time-to-digital converter for the fine phase detector was halved by the operation of a coarse phase detector that uses 5-phase clocks. The maximum time difference between the rising edges of two adjacent-phase clocks was 6 ps at 480 MHz. The PLL chip in a 65-nm process occupies $0.038mm^2$, consumes 4.8 mW at 1.2 V. The measured rms and peak-to-peak output jitters are 8.6 ps and 45 ps, respectively.

다중구조형 차이와 불순물이 카올린광물의 상전이에 미치는 영향: II. 할로이사이트 (The Influence of Polytypism and Impurities on the Phase Transformation of Kaolins: II. Halloysite)

  • 이수정
    • 자원환경지질
    • /
    • 제32권4호
    • /
    • pp.411-418
    • /
    • 1999
  • Mullitization of halloysite was examined with special attention to the influence of polytypism and impurities on the phase transformation. The phase transformation sequence in halloysite is identical with those in kaolinite and in dickite. Difference in the phase transformation above $1000^{\circ}C$ in kaolin minerals is attributed to the different crystal structures of metakaolins or the effect of impurities. Growth of mullite crytals in the discordered kaolinte including halloysite or illite occurs at about $100^{\circ}C$ lower temperature. Cristobalite is also hardly produced.

  • PDF

2상 통전 방식에 따른 동기 리럭턴스 모터의 소음 특성 분석 (The Analysis of Noise Characteristics of Synchronous Reluctance Motor in the two-phase conduction operation)

  • 오재윤;정달호;김정철
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1999년도 전력전자학술대회 논문집
    • /
    • pp.167-170
    • /
    • 1999
  • In this paper, we operate Synchronous Reluctance Motor(SynRM) using the two-phase conduction method. Acually SynRM is operated by the sinusoidal PWM method but in home-appliance there is many restrictions of making the motor such as the method of winding, the shape of rotor etc. Therefore it is possible that there is little difference of performance between the two-phase conduction method and the sinusoidal PWM method. In this paper the characteristics of motor noise will be analyzed especially in the case of using the two-phase conduction method by experiment results.

  • PDF

Rayleigh의 소리의 방향 지각 연구에 대한 과학사적 고찰 (A Historical Inquiry about Rayleigh's Research on the Perception of the Direction of Sound)

  • 구자현
    • 한국음향학회지
    • /
    • 제21권8호
    • /
    • pp.695-702
    • /
    • 2002
  • 소리가 나는 방향을 어떻게 사람이 인지하는가 라는 질문은 전통적인 심리 음향학적 문제 중하나이다. Rayleigh는 이미 1870년대부터 이에 대하여 연구를 수행하였고 이에 대한 관심은 수그러들었다가 되살아나는 방식으로 연구 경력 말기까지 그의 머리를 떠나지 않았다. 이 연구 주제는 소리 지각에 대한 Rayleigh의 유일한 관심사이면서도 음향학의 다른 연구 주제보다 더 많은 관심을 쏟은 주제였다. 그는 당초에 세기차에 의한 소리의 방향 지각을 주장하다가 위상차에 의한 방향 지각을 받아들이는 쪽으로 생각이 옮아갔다. 그리하여 그는 높은 진동수의 음에 대해서는 세기차를, 낮은 진동수의 음에 대해서는 위상차를 감지함으로써 소리의 방향 지각이 이루어진다는 현대적인 결론에 도달했다. 이러한 과정에서 Rayleigh는 매우 주의 깊고 정교한 실험방법을 채용함으로써 탁월한 음향학 실험가로서의 면모를 드러냈을 뿐 아니라 수학적 이론화의 성과를 그의 실험에 연결시킴으로써 설득력 있는 결과를 얻었다.

차분 기법을 적용한 GPS 반송파 위상 측정치 고장 검사 (Application of the Difference Method in a Fault Test on GPS Carrier Phase Measurements)

  • 손은성;임성혁;김군택
    • 한국항행학회논문지
    • /
    • 제21권6호
    • /
    • pp.601-607
    • /
    • 2017
  • 이 연구에서는 GNSS (global navigation satellite system) 인프라 기반 측위 보정정보 생성을 위한 전처리 단계인 GPS (global positioning system) 반송파 위상 측정치의 고장 검사를 수행하였다. 기존 CARST (carrier acceleration ramp step test) 방법은 수신기 시계 오차를 제거하기 위해 평균값을 이용함으로써 검사 대상에 영향을 준다. 따라서 이 연구에서는 차분 기법을 적용하여 기존 CARST 결과와 비교하였다. 실 데이터에 인위적인 고장을 인가하여 고장 시뮬레이션을 수행한 결과 차분 기법을 적용할 경우 각각의 위성에 대해 독립적인 고장 검출이 가능한 것으로 판단되었으며 단일차분과 이중차분은 유사한 결과를 나타내었다. 실 데이터를 이용하여 기존의 방법과 비교한 결과 위성 간 차분, 수신국간 차분 결과의 장단점을 확인할 수 있었다. 그러나 결과 값에 대한 위성 및 수신기 시계 오차의 영향은 추가적인 분석이 필요할 것으로 판단된다.