• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.11
• /
• pp.842-850
• /
• 2018

In this paper, the design and fabrication of a frequency-locked-loop(FLL) 5-GHz oscillator with a single resonator is presented. The proposed oscillator is the simplified version of the previous FLL oscillator with two separate resonators in the VCO and frequency detector. The resonator is commonly used in the VCO and frequency detector of the proposed oscillator configuration. The 5-GHz oscillator is implemented on the hetero-multilayer substrate composed of a Rogers' RO4350B laminate, which has excellent high-frequency performance, and the commercial FR4 three-layer substrate. The frequency locking occurs at approximately 5 GHz and has an output power of 3.8 dBm. The phase noise has a free-run VCO phase noise at frequencies above 1 kHz, and an FLL background noise at frequencies below 1 kHz. For this loop-filter, the phase noise showed an improvement of approximately 12 dB at the offset-frequency of 100 Hz.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.97-103
• /
• 2014

In this paper, a clock-data recovery using a 1/8-rate phase detector is proposed. The use of a conventional full or half-rate phase detector requires relatively higher frequency of a recovered clock, which is a burden on the design of a sampling circuit and a VCO. In this paper, a 1/8-rate phase detector is used to lower the frequency of the recovered clock and a linear equalizer is used as a input circuit of a phase detector to reduce the jitter of the recovered clock. A test chip fabricated in a 0.13-${\mu}m$ CMOS process is measured at 1.5-GHz for a 3-Gb/s PRBS input and 1.2-V power supply.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1163-1171
• /
• 2007

In this paper, the design techniques required to design heterodyned OPLL such as frequency-phase deference detector, loop filter and phase noise of semiconductor laser are presented. Through the experiments with the calculated parameters, we confirmed that the frequency-phase difference detector simply develops an error component that is proportional to the frequency-phase difference between heterodyned optical signals. The achieved frequency-phase locking range of the input laser diode frequency is around ${\pm}150MHz$. This paper describes the details of the designed as well as experimental results.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.2
• /
• pp.198-201
• /
• 2014

The phase frequency detector (PFD) is one of the most important building blocks of a phase locked Loop (PLL). Due to blind-zone problem, the detection range of the PFD is low. The blind zone of a PFD directly depends upon the reset time of the PFD and the pre-charge time of the internal nodes of the PFD. Taking these two parameters into consideration, a PFD is designed to achieve a small blind zone closer to the limit imposed by process-voltage-temperature variations. In this paper an enhanced architecture is proposed for dynamic logic PFD to minimize the blind-zone problem. The techniques used are inverter sizing, transistor reordering and use of pre-charge transistors. The PFD is implemented in 180 nm technology with supply voltage of 1.8 V.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3117-3119
• /
• 1999

In this paper, a new phase detector which can detect phase difference of variable input frequency and represent as a DC voltage is designed. The proposed phase detector has detection range from $-180^{\circ}$ to $180^{\circ}$. It is implemented by digital electronic circuit. It operates from 125 kHz to 4 MHz frequency of input signal and it's maximum phase error is $360/256^{\circ}$.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.394-397
• /
• 2002

A design study of phase detectors for the 2.5 Gb/s CDR circuit using a standard 0.18-${\mu}{\textrm}{m}$ CMOS process has been performed. The targeted CDR is based on the phase-locked loop and thus it consists of a phase detector, a charge pump, a LPF, and a VCO. For high frequency operation of 2.5 Gb/s, phase detector and charge pump, which accurately compare phase errors to reduce clock jitter, are critical for designing a reliable CDR circuit. As a phase detector, the Hogge phase detector is selected but two transistors are added to improve the performance of the D-F/F. The charge pump was also designed to be placed indirectly input and output.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3088-3090
• /
• 2000

In this paper, we introduce a charge pump PLL architecture which employs precharge phase frequency detector(PFD) and sequential PFD to achieve high frequency operation and fast acquisition. Operation frequency is increased by using precharge PFD when the phase difference is within -${\pi}\;{\sim}\;{\pi}$ and acquisition time is shortened by using sequential PFD and increased charge pump current when the phase difference is larger than |${\pi}$|. SO error detection range of proposed PLL structure is not limited to -${\pi}\;{\sim}\;{\pi}$. By virtue of this multi-phase frequency detector structure, the maximum operating frequency of 423MHz at 2.5V and faster acquisition were achieved by simulation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.46-52
• /
• 2014

This paper presents a multiple gain controlled digital phase and frequency detector with a fast lock-time. Lock-time of the digital PLL can be significantly reduced by applying proposed adaptive gain control technique. A loop gain of the proposed digital PLL is controlled by three conditions that are very large phase difference between reference and feedback signal, small phase difference and before lock-state, and after lock-state. The simulation result shows that lock-time of the proposed multiple gain controlled digital PLL is 100 times faster than that of the conventional structure with unit gain mode.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.10
• /
• pp.479-485
• /
• 2001

In this paper, we introduce a charge pump phase-locked loop (PLL) architecture which employs a precharge phase frequency detector (PFD) and a sequential PFD to achieve a high frequency operation and a fast acquisition. Operation frequency is increased by using the precharge PFD when the phase difference is within $-{\pi}{\sim}{\pi}$ and acquisition time is shortened by using the sequential PFD and the increased charge pump current when the phase difference is larger than ${\pm}{\pi}$. So error detection range of the proposed PLL structure is not limited to $-{\pi}{\sim}{\pi}$ and a high frequency operation and a higher speed lock-up time can be achieved. The proposed PLL was designed using 1.5 ${\mu}m$ CMOS technology with 5V supply voltage to verify the lock in process. The proposed PLL shows successful acquisition for 200 MHz input frequency. On the other hand, the conventional PLL with the sequential PFD cannot operate at up to 160MHz. Moreover, the lock-up time is drastically reduced from 7.0 ${\mu}s\;to\;2.0\;{\mu}s$ only if the loop bandwidth to input frequency ratio is regulated by the divide-by-4 counter during the acquisition process. By virtue of this dual PFDs, the proposed PLL structure can improve the trade-off between acquisition behavior and locked behavior.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.163-166
• /
• 1999

In this paper, frequency synthesizer that can be used in IMT-2000 was designed and fabricated using dual loop PLL(Phase Locked Loop). For improving phase noise characteristic Voltage Controlled Oscillator was fabricated using coaxial resonator and eliminated frequency divider using SPD as phase detector and increased open loop gain. Fabricated frequency synthesizer had 1.82㎓ center frequency, 160MHz tuning range and -119.73㏈c/Hz low phase noise characteristic.