• Geotechnical Engineering
• /
• v.8 no.3
• /
• pp.61-74
• /
• 1992

In order to provide fundamental data for the design of geotextile drains, the in-plane permeability coefficients were determined by tests and permeable cllaracteristics were investigated, mainly on domestic nonwoven and composite getextile products used for drainage purpose. The results obtained are as follows, The thickness, the in-plane permeability coefficient and the transmissivity with the in- crease of compressive stress are found to be remarkably decreased when the compressive stress is lass than about 10KN/m2. The inflane permeability of filament nonwovens are found to be lower than that of composites or staple-fiher nonwovens, and the compressibility of the geotextile shown to be larger for the polyester nonwovens than for the polypropylene nonwovens. The relation of compressive stress, q and compressibility, Cr is expressed as Cr=13.37 In q+23.28 and that of compressibility on the basis of 2KN /m2, Cr' and decrease ratio of in-plane permeability coefficient is followed Pr: 1.25Cr'

• Journal of Magnetics
• /
• v.7 no.1
• /
• pp.21-23
• /
• 2002

The magnetoimpedance of $Fe_{91.5-x}Zr_7B_xCu_1Al_{0.5}$alloys has been measured to investigate the influence of structural changes in the nanocrystallization process after thermal treatment. Annealing was performed at temperatures of $350^\circ{C}$, $450^\circ{C}$, and $550^\circ{C}$ for 1 hour in a vacuum. Ultra soft magnetic behavior was observed in the samples annealed at $550^\circ{C}$. The magnetoimpedance ratio and the longitudinal permeability ratio coincided with the softness of the magnetic properties of the thermally treated samples.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.473-479
• /
• 2000

The nanocrystalline Fe$_{84}$Zr$_{7}$B$_{6}$Cu$_{1}$ $Al_{2}$ alloy was annealed at 450 $^{\circ}C$ and 550 $^{\circ}C$ for l hour to achieve the ultra-soft magnetic properties such as large magnetoimpedence ratio(MIR), the incremental permeability ratio(PR), nearly zero coercivity, zero magnetostriction, etc. The PR and MIR of the sample were measured from 100 kHz to 10 MHz at a cryogenic chamber where the temperature can be varie from 10 K to 300 K. The increment of MIR value is proportional to increasing temperature. The maximum PR values measured at high frequency above 1 MHz remain almost same despite of the temperature variation from 10 K to 300 K except the sharpness in PR curves. However, the maximum PR values measured below 1 MHz show drastic increment at above 150K due to thermal activation of magnetic domains.s.s.