• 반도체디스플레이기술학회지
• /
• 제5권3호
• /
• pp.17-21
• /
• 2006

The oxygen barrier films were formed on poly(ethylene terephthalate) (PET) substrate by a sol-gel process using aminoalkoxysilanes. The coating layers were characterized by FT-IR and SEM. The oxygen permeability coefficients of coating films were measured by variable volume method, and then the influences of solvent ratio in sol and film drying temperature on the oxygen barrier properties were investigated. The aminoalkoxysilane coating films exhibited much higher oxygen barrier properties than PET film. The oxygen permeability coefficient of the film coated with each of APTEOS and APTMOS was measured to be $2.96{\times}10^{-6}$ and $3.05{\times}10^{-5}\;GPU$, respectively, while that of PET film was $1.16{\times}10^{-4}\;GPU$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.532-535
• /
• 2000

We have fabricated a sensor system for on-line monitoring the oxygen permeability and diffusivity of six different polymer films using the miniaturized 6 cathode(Ag)-single anode(Ag/AgCl) type hexagonal oxygen electrode. This system consists of multiple input front-end electronics, signal conditioning circuit using the embedded microcontroller 80C196KC, PC interface circuit and PC with the OS for microcontroller and the operating program for this system. The digital low-[ass filter was programmed and the simulated filter characteristics were enough to eliminate the noise from sensor signal. According to the experimental results, the linearity coefficients of the output voltage to oxygen partial pressure for each sensor electrode of six cathode type oxygen sensor are 0.998, 0.997, 0.998, 0.997, 0.997, 0.997 respectively, and the response times are all within 4 minutes.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제9권1호
• /
• pp.79-86
• /
• 2004

암석 내 균열을 따른 수리전도도는 균열의 기하학적 요소, 즉 방향, 간극, 거칠기 그리고 상호 연결도에 주로 좌우된다. 따라서, 균열 내 투수계수를 정확하게 계산하기 위해서는 이와 같은 기하 요소들을 최대한 계산모델에 반영할 필요가 있다. 이 연구에서는 균열 기하양상을 최대한 정확히 반영한 균열모델에서 기존 수치해석과는 다른 새로운 방법인 균질화 해석법(homogenization analysis method)을 이용하여 균열을 따른 투수계수를 구하기 위해 수치해석을 수행하였다. 먼저, 공초점 레이저 스캔 현미경(Confocal Laser Scanning Microscope)을 이용하여 암석시료의 균열 조도와 균열에 가한 수직압축력의 변화에 따른 간극 변화량을 직접 측정하고, 이와 같이 획득한 자료는 균열모델 재현을 위한 입력자료로 사용되었다. 재현된 균열모델을 토대로 한 균질화 해석법은 미시규모(microscale) 매질특성과 거시규모(macroscale) 매질특성을 동시에 고려하여 투수계수를 계산할 수 있는 것이다. 즉, 균질화 해석법은 주기적 미세구조(microstructure)를 갖는 미소 불균질 물질의 거동특성을 구명하기 위해 개발된 새로운 형태의 섭동(perturbation) 이론이다. 이는 균질한 미시규모에서 미시 투수특성을 계산한 후, 거시규모에서의 균질화 투수계수를 계산하게 된다. 그러므로, 이 방법은 균열 기하양상의 국부적 영향을 고려한 투수특성을 정확히 해석할 수 있다. 균질화법을 이용한 투수계수 산정결과를 기존 연구에서 제안한 경험식과 비교하여 그 타당성을 검증하기 위해 전술한 2차원 균열모델을 이용한 투수계수 계산을 수행하였다. 균열모델은 거칠기(roughness)를 반영하고 동일한 간극을 할당한 평행판 모델을 가정하였다. 계산결과에 의하면, 균질화 해석법에 의해 계산한 C-투수계수는 실내투수시험에 의해 구한 투수계수와 같은 범위의 값을 가지거나 $10^1$ 정도의 차이를 보여, 그 계산결과는 타당하다고 볼 수 있다. 그러나, 균질화 해석법은 국부적으로 불균질한 균열 기하양상과 물질특성이 미시규모와 거시규모에서 모두 고려되므로, 이들 특성을 정확히 알고 있을 경우 기존에 제안된 경험식들에 의한 계산결과 보다 균질화 해석법의 결과가 훨씬 정확함을 주목하여야 한다.

• 산업기술연구
• /
• 제28권B호
• /
• pp.71-79
• /
• 2008

Reports about coefficients of consolidation in horizontal direction of marine clays located at seven different sites on western and southern coast area in Korea were reviewed and characteristics of them were investigated. As results of analyses, for relation between the depth of ground and coefficients, any trend and correlation between them can not be found since they are more influenced by the nature of geological formation rather than the depth of ground. Dissipation time t50, one of important factors in estimating value of coefficient of consolidation in horizontal direction, was found to be quite related to them. For the correlation between the maximum pore pressure developed and coefficients, coefficient of consolidation in the horizontal direction tend to decrease with increase of the maximum pore pressure whereas the ground water level or static pore pressure do not have any specific correlation with those coefficients. Values of coefficient tends to increase with values of liquid limit, plastic limit and plastic index and thus they are found to be directly influenced by the contents of fines. Values of coefficient of consolidation in horizontal direction are also increased with increases of permeability in horizontal direction and coefficient of consolidation in vertical direction. They were highly correlated between coefficient of consolidation and permeability in horizontal direction while values of coefficient of consolidation in horizontal direction have a relatively low correlation with values of coefficient of consolidation in horizontal direction. Sometimes, coefficient of consolidation in horizontal direction obtained from field tests were estimated 2-3 times greater than those from laboratory tests.

• Advances in concrete construction
• /
• 제2권3호
• /
• pp.193-207
• /
• 2014

The study presented herein aims to investigate the durability related properties of rubberized concrete. Two types of waste scrap tire rubber were used as fine and coarse aggregate, respectively. The rubber was replaced with aggregate by three crumb rubber and tire chips levels of 5, 15, and 25% for the rubberized concrete productions. In order to improve the transport properties and corrosion resistance of rubberized concretes, SF was replaced with cement at 10% replacement level by weight of total binder content. The transport properties of the rubberized concretes were investigated through water absorption, gas permeability, and water permeability tests. The corrosion behavior of reinforcing bars embedded in plain and silica fume based rubberized concretes was investigated by linear polarization resistance (LPR) test. The results indicated that the utilization of SF in the rubberized concrete production enhanced the corrosion behavior and decreased corrosion current density values. Moreover, the reduction in the water and gas permeability coefficients was observed by the incorporation of SF in plain and especially rubberized concretes.

• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.91-98
• /
• 2000

Porous concrete having continuous voids is gaining more interest as an ecological material. It has several useful functions such as water and air permeability, sound absorption, etc. Its strengths are considerably lower than those of conventional concrete due to the large and continuous voids in it. This study has been carried out to investigate the influence of mix factors and mixture proportion of aggregate on the strengths and water permeability of porous concrete. And it has been carried out to investigate the evaluation of void of porous concrete by the ultra-sonic pulse velocity. The results f this study are as follows: 1) The theoretical void ratio has greater influence than any other factor on the strengths and water permeability of porous concrete. And it is a little affected by the replacement proportion of silica-fume and mixture proportion of aggregate. 2) Because the coefficients of correlation between the void ratio and ultra-sonic pulse velocity were relatively high, it will be possible that the void ratio is predicted by the ultra-sonic pulse velocity.

• Journal of Magnetics
• /
• 제1권1호
• /
• pp.24-30
• /
• 1996

The relationship between effective permeability and the remanence ratio of an Fe-based amorphous alloy (Metglas 2605S3A) is investigated over a wide frequency range, in an effort to understand magnetization behavior of the alloy. In the frequency range from 1 to 200 kHz, the permeability is maximum at the remanence ratio of 0.4-0.5 and, at frequencies over 500 kHz, the correlation with negative coefficients emerges indicating that the permeability decreases with the remanent ratio, except for the ribbon coated with an insulating layer of MgO which exhibits both high values of the effective permeability and remanence ratio. It is considered from the correlation results that the boundary at which the dominant magnetization mechanism changes from domain wall motion to spin rotation is near 500 kHz. The core loss is also investigated as a function of annealing time when the samples are annealed at a fixed temperature of $435^{\circ}C$. The core loss in most cases decreases with the annealing time, the degree of the loss may consist of the hysteresis loss and anomalous eddy current loss. The two loss components are considered to be of similar magnitudes at low frequencies while, at high frequencies, the dominant contribution to the total loss is the anomalous loss.

• Advances in concrete construction
• /
• 제10권3호
• /
• pp.211-220
• /
• 2020

In this paper, 18 single-sized pervious concrete mixtures were tested. The mixtures were prepared by altering: the amount and type of binder, type of aggregate, and the method of compaction. Concrete was compacted in layers in one of five different consolidation techniques: with standard tamping rod, wooden lath, concrete cylinder, or vibration of 12 and 40 s. Tests carried out on the specimens were: slump, density, porosity, coefficients of permeability, compressive strength and splitting strength. The relationships between porosity-density and porosity-strength were established. Two mixtures were selected for the preparation of test slabs on different subgrades and their permeability was tested according to ASTM C 1701-09 Standard. By comparing laboratory and field tests of permeability, it was concluded that the subgrade affects the test results. Measurements on the test slabs were repeated after 1 and 2 years of installation.

• 한국항해항만학회지
• /
• 제30권9호
• /
• pp.767-772
• /
• 2006

Generally, a silicone rubber and a chlorinated polyethylene(CPE) have been used as a binder for the development of high-performance composite EM(Electro Magnetic) wave absorbers. In this paper, the EM wave absorption performance of natural lacquer, which is newly proposed as a binder was investigated. The prepared MnZn ferrite EM wave absorbers are mixed with natural lacquer showed excellent EM wave absorption characteristics compared with MnZn ferrite EM wave absorbers which are mixed with the conventional binders. MnZn ferrite EM wave absorbers mixed with natural lacquer were prepared and their absorption ability was also investigated The EM wave absorbers are fabricated in different proportions of MnZn, or NiZn ferrite and natural lacquer, and their reflection coefficients are measured. The permittivity and permeability are calculated by using the measured reflection coefficients. The EM wave absorption abilities are calculated according to different thicknesses of the EM wave absorbers.

• 한국수자원학회논문집
• /
• 제53권10호
• /
• pp.861-870
• /
• 2020

자갈 입자로 구성된 다공성매질에서는 유속이 증가하여 레이놀즈수가 커지게 되면 흐름은 Darcy의 영역을 벗어나게 된다. 본 연구는 인공함양 유역의 소하천에 설치예정인 돌망태 보의 채움재를 통과하는 비선형적인 흐름특성을 규명하기 위하여 자갈칼럼과 돌망태모형을 이용한 투수실험을 수행하였다. 칼럼실험을 통하여 공극유속과 수리경사의 관계식과 계수를 결정하고, 수리평균반경과의 상관관계식을 제안하였다. 제안식으로 부터 계산된 공극유속과 공극유량은 돌망태모형 투수실험의 측정치와 잘 일치하였다.