• 한국도로학회논문집
• /
• 제7권4호
• /
• pp.1-8
• /
• 2005

아스팔트 포장에서 소성변형은 교통하중에 의해 발생하는 가장 심각한 파손중의 하나이다. 현재 개발중인 한국형 포장 설계법은 역학적-경험적 설계법으로 다양한 포장 파손 예측모델을 필요로 한다. 이 연구는 포장설계시 아스팔트층에서 발생하는 소성 변형량을 예측할 수 있는 모델을 개발하여 포장의 공용성을 규명하고자 하였다. 본 논문은 아스팔트 혼합물의 소성변형에 영향을 미치는 인자를 규명하고, 소성변형 예측 모델을 개발하고자 한다. 이를 위하여 3단계 온도, 공극률을 조합한 19mm 밀입도 혼합물에 대하여 삼축압축 반복재하시험을 수행하였다. 그 결과 혼합물의 온도와 공극률이 소성변형 예측 모델 계수에 영향을 미치는 것으로 확인되었다. 이에 근거하여 19mm밀입도 아스팔트 혼합물에 대한 소성변형 예측식을 다중 회귀분석을 통하여 개발하였으며, 개발된 모델을 검증하였다.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.11-22
• /
• 2008

The goal of this study is to provide beauticians with the fundamental material to use effectively heat permanent wave in beauty industry as well as their customer's satisfaction. It carried out an experiment with damaged hair of a woman in her late twenties to investigate the change of physical and morphological characteristics by its water content when performing heat permanent wave. After spreading 0g, 1g, 2g, 3g, and 4g of water on damaged hair respectively, heat permanent wave was treated and the change of hair was observed. The change of physical characteristic was compared through permanent wave form of hair, tensile strength and elongation. The change of morphological characteristic was observed through Scanning Electron Microscope(SEM) and Transmission Electron Microscope(TEM). The result of experiment on the physical specificity revealed that permanent wave form was the most ideal when the water content was 2g, also 3g. Though the materials with much moisture content formed the results were not satisfied. The material with 0g of water content didn't make the wave. In terms of tensile strength and elongation, tensile strength was generally reduced as per the damaged degree of hair. On the contrary, elongation was increased. It observed the changes of morphological characteristic that the damage on hair cuticle was deepen, as its moisture content was decreased, and cuticle's surface was worn away. The observation of fine structure on hair section by transmission electronic microscope also certainly showed the result that damaged hair having experience with chemical treatment had got much damaged to hair cuticle as well as hair cortex. Generally chemical treatment makes hair damaged. Under consideration of this aspect, the ultimate goal of this thesis is to minimize the damage of hair caused by chemical treatment and get the satisfaction on the hair style. According to the result of experiment, the damaged hair whose moisture content was 3g showed the best permanent wave form.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권2호
• /
• pp.123-128
• /
• 2005

This paper presents an analysis of the permanent magnet overhang effect for the permanent magnetic actuator. Generally, the overhang is often used to increase the force density in permanent magnet machineries. The overhang is particularly profitable in reducing the volume after increasing the force density per volume when using the overhang effect of the permanent magnet. Therefore, the 3D Equivalent Magnetic Circuit Network Method (3D EMCN) has been used in this paper. According to the plunger position, the flux distribution per overhang length and the holding force are quantitatively compared. Furthermore, an appropriate length of the overhang has been proposed. To confirm the accuracy of the analysis method, the results of 2D FEM and 3D FEM are compared for the basic model.

• 대한치과교정학회지
• /
• 제17권2호
• /
• pp.311-320
• /
• 1987

The purpose of this study was to investigate the growth changes of maxilla and mandible and position changes of first permanent molars of growing children The author analyzed the data using cephalometric roentgenogram of 43 boys and 39 girls age of 6 to 11 with normal occlusion The obtained results were as follows 1 The eruption path of maxillary and mandibular first permanent molar superimposed on TM-ANS and mandibular plane shows individual variation 2 There was no correlation between horizontal and vertical changes of maxillary first permanent molar, but positive correlation in mandibular first permanent molar 3 As the eruption, the forward changes of mandibular first permanent molar was significantly greater than that of maxillary first permanent molar 4 As the ages were increased, there were irregular growth changes of maxilla and mandible 5 Growth changes of lower anterior facial height was relatively stable 6 N-S-${\bar{6}}$ was stable after age 7.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.751-756
• /
• 2001

Permanent-Form is one of system forms for reducing human labor, work costs, oscillation, noise, construction wastes and so on. Permanent-Form is made from precast method in facilities. and carried in construction site to assemble with no demolding. The biggest expense to produce Permanent-Form is about manufacturing mold. To satisfy various size of building member, the same number of manufacturing mold is needed. In this paper, studied about manufacturing mold module for acquiring economic merit and construction member safety. Permanent-Form is member stress and structural analyzed if temporary equipment were used. The result of this study is below. (1) Column sizes of Permanent-Form are 47 kinds of prototype that based on Modular coordination's basic module. 4 pieces or 6 pieces are composed basically. (2) For beam size modular coordination, standard height and width of beam are 150mm and 100mm. It brings 24 kinds of prototype. 4 pieces or 5 pieces are composed basically. (3) Structural analysis value of modular member is like this Column member shows 9.4 to 85kgf/$cm^{2}$ stress distribution and beam member shows 6.3 to 95kgf/$cm^{2}$ stress distribution. Constructing permanent form could have structural safety with use of temporary equipment

• 대한치과보철학회지
• /
• 제33권2호
• /
• pp.231-239
• /
• 1995

When the complete denture is made, the record base for jaw relation is divided into temporary record base and permanent record base. However, The temporary record base include some disadvantages such as, the lackness of intimate contact between model and base, the lackness of retention during the jaw relation registration, When we obtained jaw relation the permanent record bases made from heat curing resin were utilized. We could get several advantages as follows : 1. The permanent record base provided intimate contact between the model and record base. 2. In fabricating occlusal rim on record base, the dimensional change of record base was little because the permanent record base was lesser influenced to thermal change of occlusal rim than the temporary record base. 3. At the stage of jaw relation, the retention of final denture could be early checked. 4. It could be able to get more accurate registration of jaw relation because all procedure were done on the same base during the jaw relation, artificial teeth arrangement, try-in, and final denture construction. 5. Although there was an inconvenience due to double curing procedure, the shrinkage rate in resin polimerization was relatively reduced so that more dimensional stability could be taken.

• Applied Microscopy
• /
• 제42권3호
• /
• pp.136-141
• /
• 2012

Diversification and individualization are pursued to fulfill the increasing human desire for beauty. There are many methods to change human appearances; of these, a permanent wave is often applied to improve beauty. A permanent wave uses physical and chemical methods to break and reform the bonds of natural hair. Thus, research into the optimized conditions for permanent waves is necessary to minimize hair damage and improve the efficiency of the treatment. The object of this study is to examine the effect of varying the alkalinity (8%, 12%, and 16%) of the permanent wave treatment on the wave efficiency, degree of hair damage via tensile strength, and degree of hair protein release. The results indicate that the treatment with the highest alkalinity (16%) is more effective than that with 8% alkalinity; however, the degree of hair damage when treated with the 16% alkalinity wave is higher than with the 8% alkalinity wave. Additionally, hair proteins increasingly dissolve with increasing alkalinity of the permanent wave.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1334-1340
• /
• 2001

In this paper, the experimental modeling of the force between permanent magnet and iron-core solenoid is suggested for more accurate control of 3 D.O.F. motor using the electromagnetic force. In the case of iron-core solenoid, the general equation of solenoid cant be used simply because of its nonlinearity. Therefore, the magnetic flux density is estimated through the concept of equivalent permanent magnet. The force distribution between permanent magnet and iron-core solenoid is more dependent on the magnetization of iron core caused by the permanent magnet than any other parameters. Therefore, the equation of the force estimation between these magnetic systems can be modeled by the experimental function of the magnetization of iron core. Especially, if the distance between iron-core solenoid and permanent magnet is far enough, the force equation through experiment can be expressed from only the current of coil and the distance between iron-core solenoid and permanent magnet. It means that Coulombs law can be used for magnetic systems and it is validated through the experiment. Therefore, force calibration is performed by the concept of Coulombs law.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.69-75
• /
• 2015

PURPOSES : The objective of this study is to evaluate the effectiveness of a geogrid reinforced subbase of permeable flexible pavement structures with respect to permanent deformation. METHODS : Experimental trials employing a repeated triaxial load test scheme were conducted for both a geogrid reinforced subbase material and a control specimen to obtain the permanent deformation properties based on the VESYS model. Along with this, a finite element-based numerical analysis was conducted to predict pavement performance with respect to the rutting model incorporated into the analysis. RESULTSAND CONCLUSIONS : The results of the experimental study reveal that the geogrid reinforcement seems to be effective in mitigating permanent deformation of the subbase material. The permanent deformation was mostly achieved in the early stages of loading and then rapidly reached equilibrium as the number of load applications increased. The ultimate permanent deformation due to the geogrid reinforcement was about 1.5 times less than that of the control specimen. Numerical analysis showed that the permeable, flexible pavement structure with the geogrid reinforced subbase also exhibits less development of rutting throughout the service life. This reduction in rutting led to a 20% decrease in thickness of the subbase layer, which might be beneficial to reduce construction costs unless the structural adequacy is not ensured. In the near future, further verification must be conducted, both experimentally and numerically, to support these findings.

• 대한소아치과학회지
• /
• 제11권1호
• /
• pp.13-24
• /
• 1984

To Study the eruption pattern of the maxillary first permanent molar, the author took 266 cases of true lateral cephalogram (Male; 137 cases, Female; 129 cases) from 3 to 7 years old children and observed the vertical change and axial change. The following results were obtained: 1. The angle of axial inclination of the maxillary first permanent molar to the F-H plane increased gradually from age 3 to 7, except for age 6 in both sexes. There was a slight reversal of this motion at age 6. 2. The distance from the cusp of the maxillary first permanent molar to the occlusal plane slightly decreased from age 3 to 5, and rapidly decreased from age 5 in both sexes. 3. The change of angle of the axial inclination resulted in the distance from the distobuccal cusp of the maxillary first permanent molar to the occlusal plane decreasing more than that from the mesiobuccal cusp of the maxillary first permanent molar to the occlusal plane in both sexes. 4. The eruption of the maxillary first permanent molar generally was found to be earlier in girls than boys.