• Progress in Superconductivity
• /
• v.14 no.1
• /
• pp.66-70
• /
• 2012

Superconductor flywheel energy storage system (SFESs) is an electro-mechanical battery with high energy storage density, long life, and good environmental affinity. SFESs have been developed for application to a regenerative power of train, the storage of distributed power sources such as solar and wind power, and a power quality improvement. As superconductor bearing is completely passive, it is not necessary to control a system elaborately but accurate analysis in mechanical properties of the HTS bearing is very important for application to SFESs. Stiffness and damping properties are the main index for evaluation the capacity of HTS bearings and make it possible to adjust rotordynamic properties while operating the rotor-bearing system. The superconductor bearing consists of a stator containing single grain YBCO bulks, a ring-type permanent magnet rotor with a strong magnetic field that can reach the bulk surface, and a bearing support for assembly to SFESs frame. In this study, we investigated the stiffness and damping properties of superconductor bearings in 35 kWh SFESs. Finally, we found that 35 kWh superconductor bearing has uniform stiffness properties depend on the various orientations of rotor vibration. We discovered total damping coefficient of superconductor bearing is affected by not only magnetic damping in superconductor bulk but also external damping in bearing support. From the results, it is confirmed that the conducted evaluation can considerably improve energy storage efficiency of the SFESs, and these results can be used for the optimal capacity of superconductor bearings of the SFESs.

• Tribology and Lubricants
• /
• v.35 no.2
• /
• pp.114-122
• /
• 2019

High-speed rotating machinery requires low cost and reliable bearing elements with low friction, stable rotordynamic characteristics, and a simple design. This study experimentally evaluates the effects of bearing-support elements on the vibrational characteristics of a small-sized, high-speed permanent magnetic motor. A series of coast down tests from 100 krpm characterize the vibrational behaviors, rotor displacement, and housing acceleration of motors supported by ball bearings, ball bearings with a metal mesh damper, and gas foil bearings, respectively. Two eddy-current sensors installed in the horizontal and vertical directions measure the displacement of the rotor at its front nut, and a 3-axis accelerometer attached to the motor housing measures the housing acceleration. The test results reveal that synchronous (1X) vibration components most significantly affect the rotor displacement and housing acceleration, independent of the bearing-support elements. The motor supported by the deep-groove ball bearings results in the largest rotor vibrations increasing with speed; this is due to the absence of a damping mechanism. Additionally, the metal mesh damper effectively reduces the rotor displacement, housing acceleration, and sound-pressure level in the high-speed region (i.e., above 40 krpm), thus implying its substantial damping performance when installed on the outer race of the ball bearing. Lastly, the gas foil bearing supported motor yields the smallest rotor displacement, housing acceleration, and lowest sound-pressure level because of its hydrodynamic airborne operation, which does not require rolling elements that may cause mechanical friction and vibrations.

• Journal of Korean Academy of Nursing
• /
• v.39 no.4
• /
• pp.549-561
• /
• 2009

Purpose: Work-related stress and risk factors among Korean employees were identified in this study. Methods: Data were obtained from employees aged 20 to 64 using the Korean Working Conditions Survey 2006 (KWCS). Multiple logistic regression analysis using SAS version 9.1 was performed to examine risk factors of work-related stress by gender. Results: The age-adjusted prevalence of work-related stress among male and female employees was 18.4% and 15.1% respectively. After adjustments for multiple variables among both male and female employees, there was a significant relationship between work-related stress and risk factors including education, company size, work time, ergonomic risks, biological chemical risks, and job demands. The significant variables for male employees were housework load, occupational class, and shift work, and for female employees, type of employment. Conclusion: There is a need to develop and support intensive stress management programs nationally giving consideration to work-related stress associated with working time, physical working environment, and job demands. Based on gender specific approaches, for male employes, stress management programs should be developed with consideration being given to occupational class and shift work. For stress management programs for female employees, consideration needs to be given to permanent employment status, specifically those in small companies.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.3
• /
• pp.267-272
• /
• 2009

Bone grafting the alveolar cleft allows for stability and continuity of the dental arch, provides bone for eruption of permanent teeth or placement of dental implants, and gives support to the lateral ala of the nose. Closure of residual oronasal fistula can occur simultaneously. Repair of alveolar clefts can occur at a variety of stages defined as primary, early secondary, secondary, and late. Most centers perform this surgery as secondary bone grafting. Autogenous bone provides osteogenesis, osteoinduction and conduction and is recommended for grafting to the cleft alveolus and several donor sites are available. The surgeon should select the best flap design considering the amount of mucosa available, blood supply and tension-free closure, and the extent of the oronasal communication. The authors provide a comprehensive understanding of alveolar clefts and their repair by reviewing the historical perspective, objectives for treatment, timing, source of graft, presurgical orthodontics, surgical techniques, postoperative care, and complications.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.1
• /
• pp.175-179
• /
• 2012

The objective of the study is to investigate the success rate of quit attempts and identify factors associated with success or failure of quit attempts in a quit smoking clinic. A cohort study was conducted with 495 smokers who enrolled in a quit smoking clinic from 2005 to 2008. The factors leading to quit smoking successfully were "being Malay", "having high blood pressure" "type of Nicotine Replacement Therapy" and "duration of follow up". In contrast, clerical staff had negative association to quit smoking. People who started smoking in their teenage years had a high risk of relapse. Integration of active follow up and tailor-made support programmes for quitters appear necessary in order to maintain their non-smoking status and encourage them to be permanent quitters. Integration of quit smoking clinics and primary care clinics could be another potential step for the success of quit smoking programmes.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.11a
• /
• pp.205-208
• /
• 2006

This research investigated the public rental houses In Yangchon-gu, whose locational attribute are suitable for the public rental house and has superior position in both inhabitants' participation and public welfare program. The public rental house has several types, such as permanent lease house, public lease. And several programs, the aged support police and medical services delivery system, have been the leading models for other local governments. Also, there are residents who are in their forties and fifties in the public rental houses in Yangchon-gu. un occupied is less than 1% and it seems that there is few turnover rate. 1 household rate and 2 households rate look like similar in the number of family member, total social public welfare program is focus on family welfare, juvenile welfare, teenager welfare, handicapped person welfare local, welfare and old people welfare. Accordingly, this research is used for base data of questionnaire and the first data for grope various improvement while planning group public rental house for low income group. And this research will be improved directional grope for improve livable public rental house around residents.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.2
• /
• pp.107-116
• /
• 2016

Premature babies of less than 37 weeks gestation might require oxygen therapy as an integral part of treatment and respiratory support. Because of their under-developed lungs, these so-called "preemies" might contract respiratory distress syndrome (RDS). To treat RDS, neonatal oxygen therapy is administered, where controlled oxygen gas is measured as a fraction of inspired oxygen ($FiO_2$). However, exposure to high oxygen content during long treatment could cause oxygen intoxication, which might cause permanent blindness due to retinopathy of prematurity (ROP), whereas insufficient oxygen exposure could cause severe hypoxia. A doctor would use oxygen saturation ($SpO_2$) data and prescribe a dose of $FiO_2$ to maintain $SpO_2$ within a suitable range. One objective is to maintain $SpO_2$ within the acceptable range using $FiO_2$ that is as low as possible. Adjustment of $FiO_2$ would normally be done by nurses every 15 to 30 minutes, which might not be safe in many situations. An error in $FiO_2$ adjustment during a manual procedure could be as large as +/- 2.5%. This paper presents a system that can determine an $FiO_2$ value suitable to the current $SpO_2$ and that automatically adjusts $FiO_2$ with an error clearance of +/- 0.25%.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.179-180
• /
• 2015

High wind penetration might cause the frequency stability problem because a wind power plant (WPP) is operating in a maximum power tracking mode to extract the maximal energy from wind and thus does not react to the system frequency variation. Therefore, the system operators encourage a WPP to participate in frequency control, which includes inertia/orl and primary control. The frequency support capability of a WPP depends on the amount of kinetic energy (KE) and reserve. This paper formulates an optimization problem to maximize KE while retaining the required reserve. The proposed optimization problem would allow wind generators (WGs) with a smaller wind speed to retaine more KE. The performance of the proposed optimization problem was investigated in a 100-MW WPP consisting of 20 units of 5-MW permanent magnet synchronous generators using an EMTP-RV simulator. The results show that the proposed optimization problem successfully improves the frequency nadir more than a conventional reserve allocation that distributes WGs proportional to the current output.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.5
• /
• pp.482-486
• /
• 2008

When we design a sensor nodes, a energy-consumption of sensor nodes centers on design concerns to prolong lifetime of sensor network. In recent year, many researches have attempted to study this issue. One of that is TTDD(Two-Tier Data Dissemination approach) proposed to support a sensor network which includes several mobile sensor nodes. But it gives rise to a problem which increasing control packet for the formation and maintenance a grid structure. Therefore, we proposed a Energy-Efficient Routing Protocol used a permanent grid structure for reducing control packets in a sensor network.

• 기술발표회
• /
• s.2006
• /
• pp.45-53
• /
• 2006

Top-Down Construction Method has been considered as the steadiest and the most reasonable method of construction since 1984 when it was applied to LG Da-Dong building and its usage in the field construction has since grown rapidly. With increased cases, engineers not only pursue their studies of R & D continuously but also develop various technical methods based on Top-Down Construction in an era of rapid technological change to adopt them to the field construction. Top-Down Construction meets the needs of these challenging points, such as reduction and eliminates of temporary equipment for supporting permanent structures on the ground, improved method of construction, shortening construction periods, cost reduction, and allows for minimal environmental impact.