• Journal of Surface Science and Engineering
• /
• v.57 no.2
• /
• pp.92-97
• /
• 2024

The LiBr aqueous solution, which is the absorption liquid of absorption refrigerator, must be replaced periodically because the concentration of impurities such as Cu²⁺, Fe²⁺, Ca²⁺, etc., increases due to corrosion of the tubes as the period of use increases, and the refrigeration efficiency decreases significantly. In order to reuse the waste absorption liquid, flocculation-precipitation method is mainly applied to precipitate the impurities, which requires hundreds of times the concentration of impurities and generates additional waste. In this study, a process for removing Cu ion impurities from cyclone electrolyzer by electrolytic reduction is presented in a small-scale facility without additional waste. It was confirmed that Cu ion impurities can be removed down to 1 ppm by electrolytic reduction process, and to further improve the removal rate, the mass transfer rate was increased by using a cyclone electrolyzer. The removal rate of Cu ions increased with the increase of flow rate and current density, and it was confirmed that Cu was removed at a rate of 1.48 ppm/h under the condition of 330 mL/sec and 2.5 mA/cm².

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.117-126
• /
• 2012

This study carried out on the manufacturing of pidan. The production of pidan can be one of solutions for over-produced eggs and stable egg price. For the alkali-pickling solution for manufacturing of Pidan, the tested concentration of NaOH and NaCl were respectively as 3, 5, 7% and 5, 10, 15, 20%, and examined every 2 days for 14days. According to the results, pH value of alkali-pickling solution was increased by the increment of NaOH concentration and the pickling period, and was decreased by the increment of NaCl concentration. The pH value of egg yolk was increased by the increment of NaOH concentration, but it was not significantly different by the NaCl concentration. By the increment of NaOH and NaCl concentrations, the alkali infiltration in egg yolk and egg white was accelerated. Furthermore, the weight change of the eggs in the alkali-solution has no effects on manufacturing of Pidan. Liquefied albumen showed significant differences by NaOH concentration rather than that of NaCl. There was no liquefied albumen for 14days at 3% of NaOH, but it was found between 11-12days at 5% and 8-10days at 7%, respectively. The pH values of egg white when it was liquefied albumen were between 11.8 and 12.0. Pidan was made by heat treatment after 6-7days dipped in the solution at the concentration of 7%, about 10days at 5%, and 12-14days at 3% of NaOH, respectively. Although, the period of manufacturing of Pidan was saved by the increment of NaOH concentration, liquefied albumen was accelerated and the food preference was decreased by ammonia odor. Therefore, the suitable concentration of NaOH is between 3 and 5%, and that of NaCl is between 5 and 10% due to the effect of salinity by the soaking period. Through this study, optimal pickling solution and dipping time for manufacturing of Pidan was figured out, and also find out that it can save a time about 15days for manufacturing of Pidan.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.4
• /
• pp.312-318
• /
• 2015

The aim of this study was to investigate the possibility of the supernumerary teeth for the stem cell source in dentistry. The Real Time Quantitative Reverse Transcription Polymerase Chain Reaction (Real Time qRT-PCR) method was used to evaluate the differentiation toward the odontoblast of the supernumerary dental pulp stem cells (sDPSCs). Supernumerary dental pulp stem cells were obtained from 3 children (2 males and 1 female, age 7 to 9) diagnosed that the eruption of permanent teeth was disturbed by supernumerary teeth. The common genes for odontoblasts are alkaline phosphatase (ALP), osteocalcin (OC), osteonectin (ON), dentin matrix acidic phosphoprotein 1 (DMP-1), dentin sialophosphoprotein (DSPP). The sDPSCs were treated for 0 days, 8 days and 14 days with additives and then Real Time qRT-PCR was performed in intervals of 0 days, 8 days and 14 days. The alizarin-red solution staining was performed to visualize the stained color for the degree of calcification at 7 days, 14 days, 21 days and 28 days after treating additives to the sDPSCs. From the result of the Real Time qRT-PCR, the manifestation exhibit maximum value at 8 days after additive treatment and shifted to a decrease trend at 14 days. Alizarin-red solution staining exhibit light results at 7 days after staining and generalized dark result at 14 days. Consequently, in studies with sDPSCs, appropriate treatment time of additives for Real Time qRT-PCR is 8 days. Also, a suitable period of Alizarin-red solution staining is 14 days.

• Journal of Bio-Environment Control
• /
• v.17 no.2
• /
• pp.170-175
• /
• 2008

To verify suitability of the developed nutrient solution for fertigation culture of cucumber, chemical changes of soil, growth characteristics and yield of cucumber as affected by conventional fertigation method (Control), the developed nutrient solution for fertigation culture (DNF) and Yamasaki cucumber recipe (YCR) were investigated. At 48 days after transplant, photosynthetic and transpiration rate of cucumber leaves were the highest in 3/2 strength of DNF and 1/2 strength of YCR, but not different with the Control, in the later growing period photosynthetic rate was the highest in 3/2 strength of DNF and YCR and was clearly different with the Control, transpiration rate was the highest in 3/2 strength of DNF and 1/2, 1 strengths of YCR. The growth and yield of cucumber, nutrient elements of cucumber leaves except for calcium were more in DNF and YCR than in the Control. Compared with pre-treated loam soil, pH of the soil was low and electric conductivity was high in all treatments, amounts of accumulated phosphorus, potassium, calcium, and magnesium were much in the higher concentrations per the kinds of nutrient solutions. From the above results, it was considered that the developed nutrient solution has suitability as nutrient solution for fertigation culture of cucumber.

• Preventive Nutrition and Food Science
• /
• v.4 no.3
• /
• pp.184-187
• /
• 1999

Increase in fat mobilization by capsaicin(CAP) was investigated in high-fat-fed mice using an adjustable current water pool. Male ICR 7-wk-old mice were fed a high fat diet [50% total energy content in the diet(E%) fat, 20 E% protein, 30E% carbohydrate] for 2 wk and one group (HCAP) was orally administered CAP at 2 h before swimming. After being accustomed to swimming , the mice were subjected to forced swimming every 2d in the current water pol and the total swimming period until exhaustion was measured . The total swimming period was used as index of swimming capacity. Swimming time to exhaustion of treated mice was significantly longer than that of the high-fat-fed control group (100.2$\pm$10.6 vs. 58.0$\pm$8.5min, P<0.01) after 2wk of training. The concentration of serum-free fatty scids gradually increased up to 2 h in CAP -administered mice. The perirenal adipose tissue weight of CAP -administered mice (HCAP) before swimming was lower than that of the high-fat-fed mice adminstered placebo solution (HP) which had not ingested CAP during the 2 wk. These results suggest that the increase of swimming capacity of CAP-administered high-fat-fed mice was due to an increase of fat mobilization that was induced by CAP.

• Korean Management Science Review
• /
• v.7 no.2
• /
• pp.51-57
• /
• 1990

The purpose of this thesis is to find the shortest path between two nodes on an acyclic network where the arc costs are determined by the starting time at the starting node of the arc. A branch and bound method for optimal solutions and a heuristic method is developed. In heuristic method Dijkstra algorithm is modified to maintain the minimum arrival times of maximum informations in the each time period at each node and is updated by the result with the insertion technique. Expermetal results among two methods are presented with regard to run time and solution qualities.

• Journal of applied mathematics & informatics
• /
• v.25 no.1_2
• /
• pp.201-216
• /
• 2007

In this paper we consider the difference equation $$x_{n+1}=\frac{a+bx_{n-k}\;-\;cx_{n-m}}{1+g(x_{n-l})}$$ where a, b, c are nonegative real numbers, k, l, m are nonnegative integers and g(x) is a nonegative real function. The oscillatory and periodic character, the boundedness and the stability of positive solutions of the equation is investigated. The existence and nonexistence of two-period positive solutions are investigated in details. In the last section of the paper we consider a generalization of the equation.

• Journal of Plant Biology
• /
• v.32 no.4
• /
• pp.323-330
• /
• 1989

This work was carried out to elucidate effects of endogenous and exogenous IAA transport on adventitious root formation in Phaseolus vulgaris hypocotyl cuttings. For inverted or normal incubation in distilled water, the adventitious root is always formed at the morphological base but not at the morphological apex. For inverted incubation, in both distilled water and certain chemical solution, the root formation is retarded more at the first stage (0-24 hr) than at the second stage (24-48 hr). When p-chlorophenoxyisobutyric acid (PCIB) was applied to the cuttings at the first stage, theroot formation was inhibited more than at the second stage. Treatment of 2,3,5-triiodobenzoic aicd (TIBA)markedly inhibited the adventitious root formation in Phaseolus vulgaris hypocotyl cuttings. This inhibition influenced the root according to the applied stage and period. Therefore, the root formation is more related to the stage of root primordium formation than to the stage of root elongation from the primordium. Inhibition of auxin transport oraction by TIBA or PCIB could also be reversed when hypocotyl cuttings are incubated in exogenously applied IAA solution.

• Journal of Applied Reliability
• /
• v.4 no.2
• /
• pp.91-104
• /
• 2004

In this paper we consider the concurrent spare part(CSP) requirements problem of new equipment system. When a part fails, the part is replaced and the repair of failed part is impossible and cannibalization is allowed. We assume that the failure of a part knows a Poisson process. The operational availability concept in CSP is defined, and derive a formula to calculate the operational availability using expected machine operating time during CSP period. A mathematical model is derived for making an CSP requirement determination subject to the constraint of satisfying any given operational availability limitation and an heuristic solution search procedure is derived. An illustrative example is shown to explain the solution procedure.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.4
• /
• pp.178-184
• /
• 2012

A porous nickel (P-Ni) substrate was prepared by selective leaching of zinc from pressed pellets containing powders of Ni & Zn in 4 M NaOH solution. Anodic deposition of manganese oxide onto the porous Ni substrate ($MnO_x$/P-Ni) formed nano-flakes of manganese oxide layers as revealed in SEM studies. Pseudocapacitance of this oxide electrode was evaluated by cyclic voltammetry (CV) and chronopotentiometry (CHP) in 2 M NaOH solution. The specific capacitance of the Mn oxide electrode was as high as 1515 F $g^{-1}$, which was ten times higher than Mn oxide deposited on a flat Ni-ribbon. 80% of capacity was retained after 200 charge/discharge cycles. The system showed no loss of activity in dry form over period of days. The impedance studies indicated highly conducting $MnO_x$/P-Ni substance and the obtained specific capacitance from impedance data showed good agreement with the charge/discharge measurements.