• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.4
• /
• pp.420-429
• /
• 2000

Oral & maxillofacial infections are most commonly odontogenic in origin. Although such infections are usually self-limiting, they may occasionally spread deeply into fascial spaces or planes far from the initial site of involvement. If early diagnosis and appropriate therapy is delayed, complications such as mediastinal extension, retropharyngeal spread and airway obstruction could happen to the patients. For the study of the microbiology, we have retrospectively analysed the oral & maxillofacial infected patients in the Dept. of Oral & Maxillofacial Surgery. In-Ha University Hospital from 1997 September to 2000 April. The results were as follows 1. The male patients were more common than female, with male 61.9% and female 38.1%. 2. Dental originated infections were most common cause with the incidence of 62%. 3. Most common fascial space involved was buccal space 42cases(37.2%) followed by submandibular space 13cases(11.5%), infraorbital space 13cases(11.5%), masseteric space 11cases(9.7%), periapical abscess 11cases(9.7%). 4. The causative organisms isolated from the pus culture were Gram Positive Bacterial species, which were 46cases(31.9%) of Streptococcus viridans, 16cases(8.6%) of ${\alpha}$ and ${\beta}-hemolytic$ streptococcus, 4cases(3.1%) of Strep.-group D non enterococci, 7cases(5.1%) of Staphylococcus Coa. neg., 5cases(3.9%) of Staphylococcus aureus, 3cases(2.3%) of Enterococcus faecalis, 1case(0.8%) of Bacillus species, 1case(0.8%) of Peptostreptococcus, 1case(0.8%) of Clostridium and Gram negative bacterial species, which were 4cases(3.1%) of Acinetobacter baumannii, 2cases(1.6%) of Pseudomonas aeruginosa, 2cases(1.6%) of Burkholderia cepacia, 1case(0.8%) of Neisseria species, 1case(0.8%) of Klebsiella pneumoniae, 1case(0.8%) of Klebsiella oxytoca, 1case(0.8%) of Escherichia coli. 5. In drug sensitivity test, high resistant tendency was found in Penicillin system(Penicillin G 83.3%, Ampicillin 60%) and Aminoglycosides (Gentamycin 50%, Tobramycin 45.5%), but tertiary Cephalosporin system(Cefoperazone 9.1%, Ceftazidime 18.2%), and glycopeptides system (Teicoplanin 0%, Vancomycin 0%) showed lower resistancy.

• Journal of Periodontal and Implant Science
• /
• v.34 no.2
• /
• pp.303-315
• /
• 2004

The success and failure of dental implants depends on various factors such as patient's systemic status, quantity and quality of surrounding bone, presence or absence of marginal infection and mechanical loading condition. The measurement of crestal bone changes around the implants is implemental to evaluate the success and long-term prognosis of the implant. This study was to evaluate the cumulative survival rate of the implants which had been placed in the Department of Periodontics, Chonnam National University Hospital between 1992 and 2003, and to observe the crestal bone loss around the implants which had at least 2 consecutive periapical radiographs after connecting the transmucosal abutment. The radiographs were scanned and digitalized, and the crestal bone levels on the mesial and distal surface of implants were measured using Image analyzer (Image Pro Plus, Media Cybernetics, USA), immediately after implant placement, at 2nd surgery, and 3 months, 6 months, 1 year, and every year thereafter. Any bone loss was not observed during the period between the 1stand 2nd surgery, and the bone loss was 0.86 ${\pm}$ 0.92 mm for the first year of loading after connecting the transmucosal abutment. After 1 year of loading, annual bone loss was 0.1 ${\pm}$ 0.27 mm, and total bone loss was 0.90 ${\pm}$ 0.80 mm (during the average follow-up periods of 22.5 ${\pm}$ 25.6 Mos), The implant, with smooth surface, in the mandible, and with the fixed bridge prosthesis showed greater bone loss, compared to those, with the rough surface, in the maxilla and with single crown. In systemically diseased patients (including DM or osteoporosis), the greater bone loss was observed. The cumulative survival rate among 432 implants was 94.10% for 7 years. Among 15 failed implants, 9 implants were removed due to mobility from disintegration of bone-implant interface. From this results, crestal bone loss around the implants were greatest during 1 year after transmucosal abutment connection, and various factors could affect peri-implant bone loss. To prevent and predict the bone loss around the implants and improve the prognosis, further comprehensive maintenance and follow-up schedules are required.

• Journal of Periodontal and Implant Science
• /
• v.43 no.4
• /
• pp.153-159
• /
• 2013

Purpose: The level of the implant above the marginal bone and flap design have an effect on the bone resorption during the healing period. The aim of this study is to detect the relationship between the level of the implant at the implant placement and the bone level at the healing period in the mesial and distal side of implants placed with flapless (FL) and full-thickness flap (FT) methods. Methods: Twenty-two nonsubmerged implants were placed with the FL and FT technique. Periapical radiographs were taken of the patient at implant placement, and at 6 and 12 weeks. By using computer software, bone level measurements were taken from the shoulder of the healing cap to the first bone implant contact in the mesial and distal side of the implant surface. Results: At 6 weeks, the correlation between the crestal bone level at the implant placement and crestal bone level of the FT mesially was significant (Pearson correlation coefficient=0.675, P<0.023). At 12 weeks, in the FT mesially, the correlation was nonsignificant (Spearman correlation coefficient=0.297, P<0.346). At 6 weeks in the FT distally, the correlation was nonsignificant (Pearson correlation coefficient=0.512, P<0.107). At 12 weeks in the FT distally, the correlation was significant (Spearman correlation coefficient=0.730, P<0.011). At 6 weeks in the FL mesially, the correlation was nonsignificant (Spearman correlation coefficient=0.083, P<0.809). At 12 weeks in the FL mesially, the correlation was nonsignificant (Spearman correlation coefficient= 0.062, P<0.856). At 6 weeks in the FL distally, the correlation was nonsignificant (Spearman correlation coefficient=0.197, P<0.562). At 12 weeks in the FL distally, the correlation was significant (Pearson correlation coefficient=0.692, P<0.018). Conclusions: A larger sample size is recommended to verify the conclusions in this preliminary study. The bone level during the healing period in the FT was more positively correlated with the implant level at implant placement than in the FL.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.1
• /
• pp.91-98
• /
• 2006

Supernumerary teeth are teeth which result from the continued budding of the enamel organ of the preceding tooth or from excessive proliferation of cells. They are most often found in the maxillary anterior region. And they can be responsible for a variey of irregularities in the primary and transitional dentition. There are two morphological types of supernumerary teeth, supplemental and rudimentary. Supplemental teeth have normal shape and size. In contrast, rudimental teeth have abnormal shape and smaller size. Supplemental supernumerary teeth are most common in permanent lateral incisor area. Its extraction must be decided more carefully with differential diagnosis between normal teeth, because it has normal shape and size. We reports 3 cases of the normal incisor shaped teeth in the maxillary anterior region. In all cases, we used the 3D Dental-CT as well as the conventional plain film such as periapical, occlusal, and panoramic radiograph. Consequently, 3B Dental-CT was valualble to figure out the exact position and morphology of supernumerary teeth, to do more conservative surgery and to reduce surgery stress and time.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.2
• /
• pp.186-191
• /
• 2012

The sodium hypochlorite is widely used in endodontic treatment. While it is effective solution for disinfection of root canal system, complications during canal irrigation are rarely reported, especially in primary teeth. This report demonstrates that sodium hypochlorite extruding through the root apex might cause severe complications. A 4-year-old female patient was referred from local dental clinic to the emergency room for the management of sudden facial swelling and pain during re-endodontic treatment of the maxillary primary central incisor using sodium hypochlorite. The patient was given systemic steroids, antihistamines, antibiotics and analgesics and the maxillary primary central incisor was extracted to prevent secondary infection. Swelling began to subside after 2 days. A negative result was obtained from skin patch test with sodium hypochlorite. Thorough care must be taken in primary teeth to prevent the inadvertent injection of sodium hypochlorite to periapical tissues during root canal irrigation. When adverse reaction occurs, proper management such as analgesia, cold compression and adequate medication should be done.

• Journal of Periodontal and Implant Science
• /
• v.52 no.4
• /
• pp.338-350
• /
• 2022

Purpose: Various studies have investigated 3-dimensional (3D)-printed implants using Ti6Al-4V powder; however, multi-root 3D-printed implants have not been fully investigated. The purpose of this study was to explore the stability of multirooted 3D-printed implants with lattice and solid structures. The secondary outcomes were comparisons between the 2 types of 3D-printed implants in micro-computed tomographic and histological analyses. Methods: Lattice- and solid-type 3D-printed implants for the left and right mandibular third premolars in beagle dogs were fabricated. Four implants in each group were placed immediately following tooth extraction. Implant stability measurement and periapical X-rays were performed every 2 weeks for 12 weeks. Peri-implant bone volume/tissue volume (BV/TV) and bone mineral density (BMD) were measured by micro-computed tomography. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histomorphometric analyses. Results: All 4 lattice-type 3D-printed implants survived. Three solid-type 3D-printed implants were removed before the planned sacrifice date due to implant mobility. A slight, gradual increase in implant stability values from implant surgery to 4 weeks after surgery was observed in the lattice-type 3D-printed implants. The marginal bone change of the surviving solid-type 3D-printed implant was approximately 5 mm, whereas the value was approximately 2 mm in the lattice-type 3D-printed implants. BV/TV and BMD in the lattice type 3D-printed implants were similar to those in the surviving solid-type implant. However, BIC and BAFO were lower in the surviving solid-type 3D-printed implant than in the lattice-type 3D-printed implants. Conclusions: Within the limits of this preclinical study, 3D-printed implants of double-rooted teeth showed high primary stability. However, 3D-printed implants with interlocking structures such as lattices might provide high secondary stability and successful osseointegration.

• Journal of Veterinary Clinics
• /
• v.29 no.6
• /
• pp.474-482
• /
• 2012

Elongation of cheek teeth roots in pet rabbits is very common, and is associated with malocclusion followed by reduced appetite, salivation, periapical abscess, and epiphora. Conservative methods including medication, drainage, irrigation, tooth trimming, intraoral and extraoral extraction, surgical treatment of periapical abscessation, and diet control have been adapted as the only treatments to resolve elongation of teeth roots. However, remaining challenges include the long-term period of cure and recurrence. This study was performed to investigate the possibility of nonvital pulp therapy on elongation of the mandibular cheek teeth roots in pet rabbits. Thirty-one pet rabbits with dental problems due to root elongation were submitted. Ten pet rabbits among them were treated by nonvital pulp therapy procedures (group A), while the others were treated by conservative methods (group B). Appetite improved within 1-5 days after nonvital pulp therapy and the treatment was discontinued 1 month postoperatively in group A. Abscess occurred in another site not treated with nonvital pulp therapy in only two rabbits. Growth of the mandibular cheek teeth treated with nonvital pulp therapy stopped, resulting in malocclusion, intraoral inflammation from the enamel spur, and abscess of the teeth roots. In the group B rabbits treated with conservative therapy, partial drainage, long term medication, recurrent oral trimming and control of repeated oral inflammation occurred. Consequently, buccotomy or tooth extraction was performed in group B. Owners were satisfied with nonvital pulp therapy preventing dental root abscess and repeated troubles including inflammation and malocclusion and reduction of the treatment period. These results suggest that nonvital pulp therapy can be performed on pet rabbits with elongation of mandibular cheek teeth roots.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.139-155
• /
• 2009

Objective : To assess the biological stability of immediate transmucosal placement of tapered implants into tooth extraction sockets. Material and methods : Following tooth extraction, tapered implants were immediately placed into the sockets. Teeth with evidence of acute periapical pathology were excluded. After implant placement, sutured allowing a non-submerged, transmucosal healing. Standardized radiographs were obtained every visiting from baseline to 32 weeks after implant placment. Changes in depth of the distance from the implant shoulder (IS) and from the alveolar crest (AC) to the bottom of the defect (BD) were assessed. Results : Thirteen patients (10 males and 3 females) were enrolled and followed. They contributed with 15 tapered implants. extraction iste displayed sufficient residual bone volume to allow primary stability of all implants. The mean surgery time was $41{\pm}10.0$ mins. All implants healed uneventfully yielding a survival rate of 100%. Mean ISQ values were relatively stable. Interproximal crestal bone decreased $1.69{\pm}1.2mm$ (mesial), $1.65{\pm}1.2mm$ (distal) from baseline to 32-week follow-up. No statistically significant changes with respect to FMPS, FMBS, PPD and width of KG were observed. Conclusions: Immediate transmucosal implant placement represented a predictable treatment option for the replacement of teeth lost due to reasons including fractures, endodontic failures and caries.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.2
• /
• pp.97-109
• /
• 2022

Purpose: This study aims to investigate the risk indicators contributing to implant failure, and analyze the relationship between risk indicators and marginal bone loss (MBL) through long-term follow-up over 3 years. Materials and Methods: From 2003 to 2017, patients' medical charts with a history of dental implant surgery at Chonnam National University Dental Hospital were reviewed retrospectively. The patient's demographic variables, and clinical variables were recorded. Periapical radiographs were used to evaluated the changes in MBL around implants. And we analyzed implant survival rates. Multiple regression analysis with backward elimination was conducted to correlate the patient's clinical variables and implant failure and Pearson correlation analysis was performed to the correlated between implant long-term survival rates and MBL and initial stability. Results: In multiple regression analysis, there was a statistically significant negative correlation between abutment connection type (β = -.189, P < .05), with or without SPT (β = -.163, P < .05), diabetes (β = -.164, P < .05), osteoporosis (β = -.211, P < .05) and MBL. Anticoagulant medication influenced the long-term success rate of implants. PTV values at the second implant surgery showed a statistically significant negative correlation with long-term implant survival (P < .05). Conclusion: For the long-term success of the implant, the appropriate abutment connection type must be selected and the periodic SPT is recommended. Systemic diseases such as diabetes and osteoporosis and anticoagulant medication should be considered. Furthermore, since high PTV at the second implant surgery correlated with the long-term survival rates of the implant, initial stability should be carefully considered before undergoing the prosthetic procedure.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.272-279
• /
• 2013

The concept of implant stability was basically originated from the relative condition of bone-implant interface and has some meanings for evaluation of that interface. In addtion, it has been used for the investigation of initial bone healing process after fixture installation because a degree of micromotion around interface can affect unfavorable clinical results. The purpose of this study is to investigate the mode of initial bone healing from fixture installation through prospective trial. Thirty fixtures were consecutively installed in mandibles of 26 patients with single tooth loss area and then healing abutment were secured for one-stage surgery meothod. Resonance frequency analysis was performed with one week interval during 12 weeks and periapical radiographs were taken at each month. Although marginal bone level change was not shown through observation period (P>0.05), statistical difference of implant stability was shown through 4 and 6 week (P<0.05) and was not shown after 6 week (P>0.05) according to the bone quality. Initial bone healing process is a successive process of bone resorption and favorable bone healing result might be postulated at 4 week interval after installation through RFA.