• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1796-1803
• /
• 2015

While considering the current scenario, in this world power demand goes on increases day by day. Frequent power outages occur in high voltage transmission line due to the deprived performance of polluted insulators; this affects overall operation of power system and may indirectly impinge on the growth of production sector. Many researchers are keenly taking efforts to provide highly reliable and stable power to neediest. In this paper, A.C pollution flashover performance of disc type glass insulator and composite long rod insulators investigation under various artificial pollutions by varying Equivalent Salt Density Deposition (ESDD) levels. Here, we use different types of pollution methods like binding method, dipping method and spraying methods with different types of pollutants concentration. Based on dimensional analysis, four different Mathematical models have been developed to predict the A.C pollution Flashover Voltage (FOV) of insulators. Both the experimental and mathematically modeled results are compared; it's observed that mathematical model 3 yields better results.

• 설비공학논문집
• /
• 제28권2호
• /
• pp.75-80
• /
• 2016

There are three types of dehumidification systems : refrigeration dehumidification method, desiccant dehumidification method and hybrid dehumidification method. The first method involves removing moisture by condensation below the dew point, the second method involves absorption by a desiccant material and the last is an integration method. However, the refrigeration dehumidification system consumes too much power and controlling the humidity ratio is difficult. The desiccant dehumidification system uses less power but it has problems of environmental pollution. The hybrid dehumidification system has the disadvantage of a high initial cost. On the other hand, the energy consumption of the membrane based dehumidification system is lower than for the refrigeration dehumidification system. Also, it is an environmentally friendly technology. In this study, the performance parameters are evaluated for the dehumidification system using a hollow fiber membrane. Available area, duct side dry-bulb temperature, sweep gas flux (flow rate) and LMPD (Log Mean Pressure Difference) were used as the performance parameters.

• 한국정보통신학회논문지
• /
• 제13권10호
• /
• pp.2211-2217
• /
• 2009

본 논문에서는 잔향이 존재하는 환경에서 단일 마이크로폰을 사용한 음성 개선 방법을 제시한다. 스펙트럼 차감법(Spectral Subtraction)은 스펙트럼 상에서 잔향성분 및 잡음을 제거 할 수 있는 효과적인 방법이다. 스펙트럼 차감법은 음성과 비음성 구간의 정확한 구분을 필요로 하며 성능을 향상시키기 위해 본 논문에서는 엔트로피(Entropy) 기반의 음성 구간 검출법을 적용하였다. 제시된 방법을 기존의 에너지 검출 기반의 음성 검출법을 적용한 스펙트럼 차감법과 비교하여 성능 평가를 수행하였다. SNR 및 잔향시간에 따른 잔향 제거비율을 평가지표로 사용하였으며, 시뮬레이션 결과 기존의 스펙트럼 차감법과 비교하여 제시된 방법이 우수한 성능을 보였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권6호
• /
• pp.661-669
• /
• 2018

Engineering system problems consist of multi-objective optimisation and the performance analysis is generally time consuming. To optimise the system concerning its performance, many researchers perform the optimisation using an approximation model. The Response Surface Method (RSM) is usually used to predict the system performance in many research fields, but it shows prediction errors for highly nonlinear problems. To create an appropriate metamodel for marine systems, Lee (2015) compares the prediction accuracy of the approximation model, and multi-objective optimal design framework is proposed based on a confirmed approximation model. The proposed framework is composed of three parts: definition of geometry, generation of approximation model, and optimisation. The major objective of this paper is to confirm the applicability/usability of the proposed optimal design framework and evaluate the prediction accuracy based on sensitivity analysis. We have evaluated the proposed framework applicability in derrick structure optimisation considering its structural performance.

• 산업경영시스템학회지
• /
• 제34권4호
• /
• pp.42-48
• /
• 2011

This paper proposes performance measurement method of quality small-group activity in business. This paper collects and analyzes quality circle activities data respect to tangible and intangible effect in national quality circles competitions festival. This paper proposes QPI (quality-circle performance index) based on Balanced Scorecard for quality small-group activity in quality improvement area. QPI is to measure the performance of quality improvement activities in the business firms. QPI is able to use widely in industries to provide a performance measure of quality small-group activity. In this paper, we propose the application method of QPl.

• 대한의용생체공학회:의공학회지
• /
• 제31권6호
• /
• pp.417-426
• /
• 2010

We present a speech processing strategy incorporating instantaneous frequency (IF) encoding for the enhancement of melody recognition performance of cochlear implants. For the IF extraction from incoming sound, we propose the use of a Teager energy operator (TEO), which is advantageous for its lower computational load. From time-frequency analysis, we verified that the TEO-based method provides proper IF encoding of input sound, which is crucial for melody recognition. Similar benefit could be obtained also from the use of a Hilbert transform (HT), but much higher computational cost was required. The melody recognition performance of the proposed speech processing strategy was compared with those of a conventional strategy using envelope extraction, and the HT-based IF encoding. Hearing tests on normal subjects were performed using acoustic simulation and a musical contour identification task. Insignificant difference in melody recognition performance was observed between the TEO-based and HT-based IF encodings, and both were superior to the conventional strategy. However, the TEO-based strategy was advantageous considering that it was approximately 35% faster than the HT-based strategy.

• International Journal of Control, Automation, and Systems
• /
• 제4권6호
• /
• pp.705-713
• /
• 2006

For the analysis of multiunit extracellular neural signals as multiple spike trains, neural spike sorting is essential. Existing algorithms for the spike sorting have been unsatisfactory when the signal-to-noise ratio(SNR) is low, especially for implementation of fully-automated systems. We present a novel method that shows satisfactory performance even under low SNR, and compare its performance with a recent method based on principal component analysis(PCA) and fuzzy c-means(FCM) clustering algorithm. Our system consists of a spike detector that shows high performance under low SNR, a feature extractor that utilizes projection pursuit based on negentropy maximization, and an unsupervised classifier based on Gaussian mixture model. It is shown that the proposed feature extractor gives better performance compared to the PCA, and the proposed combination of spike detector, feature extraction, and unsupervised classification yields much better performance than the PCA-FCM, in that the realization of fully-automated unsupervised spike sorting becomes more feasible.

• Journal of Information Processing Systems
• /
• 제8권1호
• /
• pp.85-100
• /
• 2012

The Hartley transform based feature extraction method is proposed for fingerprint matching. Hartley transform is applied on a smaller region that has been cropped around the core point. The performance of this proposed method is evaluated based on the standard database of Bologna University and the database of the FVC2002. We used the city block distance to compute the similarity between the test fingerprint and database fingerprint image. The results obtained are compared with the discrete wavelet transform (DWT) based method. The experimental results show that, the proposed method reduces the false acceptance rate (FAR) from 21.48% to 16.74 % based on the database of Bologna University and from 31.29% to 28.69% based on the FVC2002 database.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.301-306
• /
• 2008

The present seismic analysis of Road-Bridge Design Standard is on a basis of load-vased analysis which lets structures have the strength over load. In this study, the capacity spectrum method, a kind of displacement based method, which is evaluated by displacement of structure, is presented as an alternative to the analysis method based on load. Seismic capacity is performed about the existing reinforced concrete pier which has already secured seismic design by capacity spectrum method. As a result, capacity spectrum method could realistically evaluate the non-elastic behavior of structures easilly and quickly and the displacement of structures for variable ground motion level. And it could efficiently apply to an evaluation of seismic capacity about the existing structures and a verification of design for capacity target of the structure. We propose the seisemic performance method by using the Finite Element Analysis Program.

• 한국전산유체공학회지
• /
• 제10권1호
• /
• pp.99-106
• /
• 2005

Performance of first, second and third order accurate methods for calculation of in viscid fluxes in fluid flow governing equations are investigated here. For the purpose, an upwind method based on Roe's scheme is used to solve 2-dimensional Euler equations. To increase the accuracy of the method two different schemes are applied. The first one is a second and third order upwind-based algorithm with the MUSCL extrapolation Van Leer (1979), based on primitive variables. The other one is an upwind-based algorithm with the Chakravarthy extrapolation to the fluxes of mass, momentum and energy. The results show that the thickness of shock layer in the third order accuracy is less than its value in second order. Moreover, applying limiter eliminates the oscillations near the shock while increases the thickness of shock layer especially in MUSCL method using Van Albada limiter.