• Journal of Mechanical Science and Technology
• /
• 제15권6호
• /
• pp.776-787
• /
• 2001

The turbofan engine performance analysis for a medium scale commercial aircraft was carried out and the LQR control scheme for performance optimization was studied. By using scaled component maps from well-known CF6 engine characteristics, the steady-state performance analysis result was compared with BR715-56 engine performance data. The transient performance analysis was performed with four fuel schedules. The linear simulation was done at the maximum take-off condition. The real time linear simulation was performed by interpolation of the system matrices, which used the least square method as the function of LPC rotational speed. By using linear system matrices of design point, the LQR controller which used control variables for the fuel flow and the LPC bleed air was designed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권4호
• /
• pp.446-459
• /
• 2017

Naval ships are assigned many and varied missions. Their performance is critical for mission success, and depends on the specifications of the components. This is why performance analyses of naval ships are required at the initial design stage. Since the design and construction of naval ships take a very long time and incurs a huge cost, Modeling and Simulation (M & S) is an effective method for performance analyses. Thus in this study, a simulation core is proposed to analyze the performance of naval ships considering their specifications. This simulation core can perform the engineering level of simulations, considering the mathematical models for naval ships, such as maneuvering equations and passive sonar equations. Also, the simulation models of the simulation core follow Discrete EVent system Specification (DEVS) and Discrete Time System Specification (DTSS) formalisms, so that simulations can progress over discrete events and discrete times. In addition, applying DEVS and DTSS formalisms makes the structure of simulation models flexible and reusable. To verify the applicability of this simulation core, such a simulation core was applied to simulations for the performance analyses of a submarine in an Anti-SUrface Warfare (ASUW) mission. These simulations were composed of two scenarios. The first scenario of submarine diving carried out maneuvering performance analysis by analyzing the pitch angle variation and depth variation of the submarine over time. The second scenario of submarine detection carried out detection performance analysis by analyzing how well the sonar of the submarine resolves adjacent targets. The results of these simulations ensure that the simulation core of this study could be applied to the performance analyses of naval ships considering their specifications.

• 한국시뮬레이션학회논문지
• /
• 제7권2호
• /
• pp.1-16
• /
• 1998

This paper presents an automated methodology for campus network design and performance analysis using the rule-based SES and DEVS modeling & simulation techniques. Proposed methodology for structural design and performance analysis can be utilized not only in the early stage of network design for selecting configurable candidate from all possible design alternatives, but also in simulation verification for generating performance data. Our approach supercedes conventional methodologies in that, first, it can support the configuration automation by utilizing the knowledge of design expert ; second, it can provide the simulation-based performance evaluation ; third, it is established on the basis of the well-formalized framework so that it can support a hierarchical and modular system design. Several simulation tests performed on a campus network example will illustrate our technique.

• 한국태양에너지학회 논문집
• /
• 제31권6호
• /
• pp.103-110
• /
• 2011

The aim of this study was to analysis the Heating/cooling performance and Daylighting performance of Solar Window System built in apartments. the solar window is the idea to integrate daylight as a third form of solar energy into a PV/Solar Collector system. The process of this study is as follows: 1)Solar Window system was designed through the investigation of previous paper and work. 2)The simulation program(Lightscape3.2) was used in daylighting performance analysis. the reference model of simulation was made up to analysis daylighting performance on Solar Window system. 3)The simulation program(ESP-r, Therm5.0, Window6.0) was used in energy performance analysis. the reference model of simulation was made up to analysis energy and daylighting performance on Solar Window system. 4)The Size of Simulation model for daylighting and heating/cooling energy analysis was $148.5m^2$ 5)The lighting performance analysis was carried out with various variants, such as the size and installed area of Solar Window system. 6)Energy performance simulation was carried out with various variants, such as Integrated U-value of Solar Window system according to its position, installed angle and insulation thickness. Consequently, When Solar Window system is equipped with balcony window of Apartment, Annual heating and cooling energy of reference model was cut down at the average of $4.1kWh/m^2$ or 4.2%.

• 한국IT서비스학회지
• /
• 제12권4호
• /
• pp.349-367
• /
• 2013

In MANET, the AODV routing protocol with on-demand method has a problem in large control packet overhead. In order to improve this, we first need a comprehensive analysis of correlation between performance metrics and factors affecting the performance of AODV. Selected parameters based on this analysis make it enable to be a more accurate and fair performance analysis, as well as to reduce the time and effort when constructing a scenario for performance analysis. In this paper, various scenarios are configured to apply AODV by varying the values of factors affecting the performance with network simulator QualNet 5.0, and then the results are analysed using performance metrics proposed by IETF MANET working group. This paper also founds a correlation between performance metrics and factors affecting the performance for AODV routing protocol, choosing the values of factors that represent many of the most maximum and minimum values of each performance metrics, and proposes optimal simulation parameters for a more accurate performance evaluation of routing protocols with minimal scenario in experiments. Next, performance comparison of AODV, DSR and DYMO routing protocols based on the proposed simulation parameters is shown which provides a comparative analysis on the performance of on-demand routing protocols. Results of this paper could be very useful for the researcher or service provider who wants to find nice simulation environment or select a proper routing protocol.

• 한국시뮬레이션학회논문지
• /
• 제14권3호
• /
• pp.119-127
• /
• 2005

Web services and their composition (web processes) are promising technologies to efficiently integrate disparate software components over various types of systems. As many web services are nowadays available on Internet, quality of services (QoS) and performance/cost become increasingly important to differentiating between similar service providers. In this work, we introduce sPAC (Web Services Performance Analysis Centre) and show how customers can benefit from sPAC to consider performance in composing and commercializing web services. sPAC 1) helps users to graphically describe the workflow of web services, 2) invokes web services to test out performance for light load conditions, 3) automatically converts the web services and the flow between them into a simulation model, 4) conducts extensive simulations for heavy load conditions and various usage patterns, and 5) reports analysis results and estimation data for the web services.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.195-206
• /
• 1997

In this study, a simulation tool is developed in order to investigate non steadystate cornering performance of 4WD/4WS vehicles. The 4WD/4WS vehicles are modeled as a 8-th order dynamic system which includes complex non-linear vehicle dynamics and tire models. The vehicle models are constructed into a modulated simulation tool and are utilized for analyzing cornering performance such as combined braking and steering, cornering on the icy read and $\mu$-split braking, The whole analysis is done with the simulation tool which consists of a number of subsystems and offers graphic environment. Simulation results show that this tool is useful and cost-effective in the dynamic analysis of the combustion-engine vehicles as well as electrically driven vehicles.

• KIEAE Journal
• /
• 제15권4호
• /
• pp.5-11
• /
• 2015

Purpose: Recently, renewable energy system has been widely used to reduce the energy consumption and CO2 emission of building. A photovoltaic/thermal(PVT) system is a kind of efficient energy uses, which is combined with photovoltaic module and solar thermal collector. PVT system removes heat from PV module by through thermal fluid to raise the performance efficiency of the PV system. However, though PVT system has the merit of the improved efficiency in theoretical approach, there have been few performance analysis for PVT system using the dynamic energy simulation. In this study, in order to establish the optimum design method of this system, simulation was conducted by using individual system modules. Method: For the dynamic simulation, TRNSYS17 was used and local weather data was utilized. Furthermore, the system performance in various installation condition was calculated by case studies. Result: As a result, the amount of electric generation and heat production in each case was found by the simulation. The gap of system performance was also evident according to the installation condition.

• 한국시뮬레이션학회논문지
• /
• 제19권4호
• /
• pp.21-29
• /
• 2010

본 연구는 시뮬레이션 방법을 이용한 자동차용 열 수축 튜브 생산 공정을 가상의 생산 공정 모델로 구현하고, 구현된 모델을 기반으로 열 수축 튜브 생산 공정을 분석하는 연구이다. 자동차용 열 수축 튜브 생산 공정을 분석하기 위해서 공정별로 생성되는 데이터를 수집하고, 수집된 데이터 분석을 통한 자동차용 열 수축 튜브 생산 공정을 분석할 수 있는 가상의 생산 공정 모델을 구현하였다. 구현된 모델을 통해 공정 내에서 발생되는 병목현상 파악 및 원인분석, 공정별 사이클 타임, 부품 생산량 등을 산정함으로써 현 공정 분석 및 개선방안을 모색할 수 있어 기업의 생산 공정관리 효율성을 높일 수 있다.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2006년도 춘계학술대회
• /
• pp.87-109
• /
• 2006

The purpose of this paper is to examine the present performance evaluation methods and to make Monte Carlo Simulation Model for the IT-based Government innovation project. It is suggested the proper ways in applying of Monte Carlo Simulation Model by integration of present evaluation methods. It develops the theoretical framework for this paper, examining the existing literature on proposing an approach to the key concepts of the economic impact analysis methods. It examines the actual conditions of performance evaluation focusing on the It-based Government Innovation project. It considers how the simulation model is applied to the performance management in the public innovation project focusing on the framework, process and procedure of performance management.