• 대한전기학회논문지
• /
• 제35권4호
• /
• pp.148-155
• /
• 1986

This paper presents a new decoupled power system state estimation method. The decoupling is achieved via simple linear transformation on power measurements in contrast with the modified fast decoupled state estimation method which assumes decoupling by direct negligence of the off-diagonal blocks of the observation functions. The new estimation method is compared with the modified decoupled state estimation method against IEEE-14 bus model power system and 25 bus model power system in several system conditions. It is observed that the proposed method shows better convergence performance and filtering performance than a modified fast decoupled state estimation.

• Journal of Communications and Networks
• /
• 제9권4호
• /
• pp.466-472
• /
• 2007

Single carrier block transmission with frequency domain equalization(SC-FDE) has been shown to be a promising candidate in ultra-wideband(UWB) communications. In this paper, we analyze the performance of SC-FDE over UWB communications with channel estimation error. The probability density functions of the frequency domain minimum mean-squared error(MMSE) equalizer taps are derived in closed form. The error probabilities of single carrier block transmission with frequency domain MMSE equalization under imperfect channel estimation are presented and evaluated numerically. Compared with the simulation results, our semi-analytical analysis yields fairly accurate bit error rate performance, thus validating the use of the Gaussian approximation method in the performance analysis of the SC-FDE system with channel estimation error.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2001년도 춘계학술대회논문집:21세기 신지식정보의 창출
• /
• pp.280-287
• /
• 2001

The studies to estimate the surface spectral reflectance of an object have received widespread attention using the multi-spectral camera system. However, the multi-spectral camera system requires the additional color filter according to increment of the channel and system complexity is increased by multiple capture. Thus, this paper proposes an algorithm to reduce the estimation error of surface spectral reflectance with the conventional 3-band RGB camera. In the proposed method, adaptive principal components for each pixel are calculated by renewing the population of surface reflectances and the adaptive principal components can reduce estimation error of surface spectral reflectance of current pixel. To evacuate performance of the proposed estimation method, 3-band principal component analysis, 5-band wiener estimation method, and the proposed method are compared in the estimation experiment with the Macbeth ColorChecker. As a result, the proposed method showed a lower mean square ems between the estimated and the measured spectra compared to the conventional 3-band principal component analysis method and represented a similar or advanced estimation performance compared to the 5-band wiener method.

• 디지털산업정보학회논문지
• /
• 제10권4호
• /
• pp.63-70
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.45-46
• /
• 2005

In this paper, a passive telemetry sensor system using Unscented Kalman Filter(UKF) is proposed. Specially, to show the effective tracking performance of the UKF, we compared with the tracking performance of Recursive Least Square Estimation (RLSE) using linearization.

• 한국인터넷방송통신학회논문지
• /
• 제14권6호
• /
• pp.107-112
• /
• 2014

본 논문에서는 레이더 시스템에서 단일 펄스 방식, 집적 상관 방식, 비 집적 상관 방식의 신호대 잡음비 성능에 대해서 비교 분석하였다. 그리고, 공간상에 두 목표물에 대한 방향을 추정하여 기존의 방법과 비교 분석하였다. 레이더 시스템에서 일반적으로 반사파와 전송파의 왜곡을 방지하고 감소시키기 위해서 펼스파를 이용하여 신호를 전송한다. 본 논문에서는 수신신호를 처리하는 방식으로 포락선 검파기 앞에서 처리하는 집적 상관방식과 과 포락선 검파기 뒤에서 처리하는 비 집적 상관 방식의 성능을 비교 분석하였다. 모의실험을 통하여 목표물 방향을 추정하였고, 두 목표물의 탐지 거리를 추정하여 신호대 잡음비 성능을 비교 분석하였다. 집적 상관방식의 성능이 우수함을 입증하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.195-200
• /
• 2003

An expert system for estimation of fatigue properties from simple tensile data of material is developed, considering nearly all important estimation methods proposed so far, i.e., 7 estimation methods. The expert system is developed using an expert system shell, UNIK, and the knowledge base is constructed with production rules and frames. Forward chaining is employed as a reasoning method. The expert system has three major functions including the function to update the knowledge base. The performance of the expert system is tested using the 54 ${\sigma}-N$ curves consisting of 381 ${\sigma}-N$ data points obtained for 22 materials. It is found that the expert system developed has excellent performance especially for steel materials, and reasonably good for titanium alloys.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.114-119
• /
• 2001

An expert system for estimation of fatigue properties from simple tensile data of material is developed, considering nearly all important estimation methods proposed so far, i.e., 7 estimation methods. The expert system is developed to utilize for the case of only hardness data available. The knowledge base is constructed with production rules and frames using an expert system shell, UNIK. Forward chaining is employed as a reasoning method. The expert system has three major functions including the function to update the knowledge base. The performance of the expert system is tested using the 54 $\varepsilon$-N curves consisting of 381 $\varepsilon$-N data points obtained for 22 materials. It is found that the expert system developed has excellent performance especially for steel materials, and reasonably good for aluminum alloys.

• 한국통신학회논문지
• /
• 제38A권4호
• /
• pp.310-317
• /
• 2013

본 논문에서는 실시간 위치 추적 시스템 (RTLS: real-time locating system)을 위한 ESPRIT 기반의 초 분해능 지연 시간 추정 (super-resolution time delay estimation) 알고리즘을 개발하고 여러 가지 다중 경로 환경에서 성능을 분석한다. 지연 시간 추정을 위한 기존의 코릴레이션 방식은 다중 경로들의 지연 시간의 차이가 한 칩 이내일 경우 성능이 급격히 저하되는 문제점이 있다. 이러한 문제를 해결하기 위해 대표적인 초 분해능 도래각 추정 알고리즘인 ESPRIT을 지연 시간 추정에 적용하여 주파수 영역 초 분해능 지연 시간 추정 알고리즘을 개발하고 여러 가지 다중 경로 환경에서 알고리즘의 성능을 분석한다.

• 비파괴검사학회지
• /
• 제30권1호
• /
• pp.13-19
• /
• 2010

본 논문에서는 원전SG세관 결함 크기 추정을 위한 새로운 구조의 추정시스템에 대한 연구를 수행한다. 기존의 연구에서는 결함 크기를 추정하기 위하여 각각의 결함 형태별로 결함크기추정시스템을 설계하였다. 이와 같은 경우, 추정시스템의 구조가 복잡해지고 결함 크기 추정 이전에 수행하는 결함형태분류기의 정확성이 떨어질 경우 결함 크기 추정 성능도 결과적으로 악화될 수밖에 없다. 이에 본 논문에서는 결함 형태 분류 과정을 필요로 하지 않는 결함크기추정시스템의 성능을 분석하고 이를 향상시키기 위한 방안을 연구하였다. 기존의 추정시스템은 각각의 결함 형태별로 특화된 추정기를 사용하기 때문에 추정 성능이 훨씬 뛰어날 것으로 예상되었지만, 실험 결과 두 추정시스템의 성능 차이는 그리 크지 않다는 것을 알 수 있었다. 따라서 결함형태분류기의 정확성이 완벽하지 않을 경우, 본 논문에서 제안한 구조의 추정기가 효과적으로 사용될 수 있을 것으로 기대된다.