• Journal of Pharmaceutical Investigation
• /
• v.33 no.3
• /
• pp.163-169
• /
• 2003

In order to develop a film-forming transdermal drug delivery system, polyurethane (PU) based on poly(ethylene glycol) and poly(tetramethylene oxide) was synthesized and characterized. The synthesized PU was blended with Gantrez ES 225 (GT) to improve the adhesion property of film-forming agent to the skin. When film-forming gel formulation containing 3% ketoprofen (KP) was applied, transparent thin film was obtained within 5 minutes and adhered to the skin for 8 hours. In vitro percutaneous absortion studies were performed to determine the rate of ketoprofen absorption through guinea pig skin. A prominent effect of limonene on the skin permeability of ketoprofen was observed among the various skin permeation enhancers investigated. Considering mechanica properties of film and skin permeability of ketoprofen, 2% of limonene was optimal content in the film forming transdermal formulation.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.3
• /
• pp.173-177
• /
• 2005

Addition of 30% propylene glycol was required to maintain sink condition in the evaluation of percutaneous absorption of estradiol and norethindrone acetate. The permeability of estradiol was higher in silicone and SIS adhesives. However, estradiol was crystallized in silicone, SIS, and SBS adhesive matrix. The permeability ratio of estradiol or norethindrone acetate from acrylic pressure sensitive adhesives varied widely depending on the functional group of the acrylic adhesives. PEO grafting to acrylic adhesive seemed to change physicochemical property of acrylic adhesive and increased the permeability of estradiol and norethindrone acetate significantly. On the contrary, highly cross-linked enhancer compatible acrylic adhesive decreased the permeability of both estradiol and norethindrone acetate. $Span^{\circledR}$ 20 provided the highest enhancing effect on the permeability of both estradiol and norethindrone acetate followed by oleic acid and $Crovol^{\circledR}$ EP40. The permeability of the drugs from the developed system was comparable to that from commercial $Combitran^{\circledR}$, although significantly lower amount of estradiol and norethindrone acetate were loaded in the developed system.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.3
• /
• pp.165-169
• /
• 1998

The effect of various vehicles on the permeation of a model drug, ketoprofen in solution formulation was evaluated using a flow-through diffusion cell system at $37^{\circ}C$. To investigate the mechanism of permeation rate enhancement, the effects of pretreatment with various vehicles on the permeation of the drug were evaluated using 5 mg/ml solution and saturated solution. The order of permeation rate of ketoprofen across hairless mouse skin after pretreatment with various vehicles was similar to the case where the vehicles and the drug were coadministered except ethanol and oleic acid. The results indicate that the mechanism of enhancement can be direct action of the vehicles on the barrier property of the skin and/or carrier mechanism.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.4
• /
• pp.347-351
• /
• 1995

Antisense phosphorothioate oligodeoxynucleotide(PS-ODN) against $TGF-{\beta}$ was developed as scar formation inhibitor. The scar was caused collagen deposition due to overexpression of $TGF-{\beta}$ in wounded skin. The percutaneous absorption of partially modified PS-ODN(25 mer) was investigated for the purpose of its effective delivery. Though PS-ODN has high molecular weight (MW=8,000) and polyanionic charge, it was permeated through skin. The skin permeation of PS-ODN was markedly increased by the removal of stratum corneum and dermis. Moreover, the skin permeation of PS-ODN was decreased in the following order; hairless mouse skin>rat skin>human cadaver skin. Thus, PS-ODN represents a logical candidate for further evalution due to the potential for delivery into the wounded skin.

• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.572-577
• /
• 2001

The feasibility of skin penetration was studied for aspalatone (AM, acetylsalicylic acid maltol ester), a novel antithrombotic agent. In this studys hairless mouse dorsal skins were used as a model to select composition of vehicle and AM. Based on measurements of solubility and partition coefficient, the concentration of PC that showed the highest flux for AM across the hairless mouse skin was found to be 40%. The cumulative amount permeated at 48 h, however, appear inadequate, even when the PC concentration was employed. To identify a suitable absorption enhancer and its optimal concentration for AM, a number of absorption enhancers and a variety of concentration were screened for the increase in transdermal flux of AM. Amongst these, linoleic acid (LOA) at the concentration of 5% was found to have the largest enhancement factor (i.e., 132). However, a further increase in AM flux was not found in the fatty acid concentration greater than 5%, indicating the enhancement effect is in a bell-shaped currie. In a study of the effect of AM concentration on the permeation, there was no difference in the permeation rate between 0.5 and 1% for AM, below its saturated concentration. At the donor concentration of 2%, over the saturated condition, the flux of AM was markedly increased. A considerable degradation of AM was found during permeation studies, and the extent was correlated with protein concentrations in the epidermal and serosal extracts, and skin homogenates. In rat dorsal skins, the protein concentration decreased in the rank order of skin homogenate > serosal extract > epidermal extract. Estimated first order degradation rate constants were $6.15{\pm}0.14,{\;}0.57{\pm}0.02{\;}and{\;}0.011{\pm}{\;}0.004{\;}h^{-1}$ for skin homogenate, serosal extract and epidermal extract, respectively. Therefore, it appeared that AM was hydrolyzed to some extent into salicylmaltol by esterases in the dermal and subcutaneous tissues of skin. taken together, our data indicated that transdermal delivery of AM is feasible when the combination of PC and LOA is used as a vehicle. However, since AM is not metabolically stable, acceptable degradation inhibitors may be nervessary to fully realize the transdermal delivery of the drug.

• Journal of Pharmaceutical Investigation
• /
• v.36 no.3
• /
• pp.169-174
• /
• 2006

The aim of this work was to prepare tenoxicam-ethanolamine salt with improved physicochemical properties for transdermal application. Tenoxicam-ethanolamine salt was prepared in methylene chloride and its physicochemical properties were investigated by DSC and FT-lR. The broad peak of tenoxicam around 3600-3200 $cm^-1$ was shifted to lower wavenumber and more broadened. The characteristic endothermic melting peak of tenoxicam appeared at $223^{\circ}C$. The melting peak of tenoxicam-ethanolamine salt was shifted to $159^{\circ}C$. In contrast to relatively small difference in the partition coefficients of tenoxicam and the tenoxicam-ethanolamine salt, large difference in aqueous solubility was observed. $Crovol^{\circledR}$ PK4O (PEG-12 palm kernel glycerides) provided the highest skin flux for both compounds. The order of the enhancing effect of the various vehicles tested was similar for tenoxicam and tenoxicam-ethanolamine salt, which indicated that their enhancing mechanism for tenoxicam and tenoxicam-ethanolamine salt is similar. Tenoxicam-ethanolamine salt had a higher skin flux than tenoxicam by 1.2- to 31.7-fold, depending on the vehicles used. It is suggested that the vehicles with medium HLB value, 1 double bond, and lower ethylene oxide chain length have a better ability to modify the permeability of the stratum corneum and to promote the effective penetration of tenoxicam and tenoxicam-ethanolamine salt.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.29-35
• /
• 2020

In this study, the skin permeability was measured by adding cell penetrating peptides, arginine oligomers; (tetra-D-arginine (R4) and hexa-D-arginine (R6)) to little skin-permeable anti-wrinkle peptides (GHK, GHK-Cu, and Pal-GHK), and the results were analyzed by the following six cases. First, in cases where only anti-wrinkle peptides were contained, copper ions (Cu₂⁺) and palmitic acid enhanced the transdermal permeability. Second, when arginine oligomers (R4, R6) were added to GHK, arginine oligomers (R4, R6) increased percutaneous permeability, and R4 showed better percutaneous permeability. Third, the addition of R4 and R6 to GHK-Cu resulted in increased percutaneous transmittance, followed by R6 < R4 percutaneous transmittance. Fourth, when R4 and R6 were added to Pal-GHK, the percutaneous permeability increased with results in R6 < R4 order. Fifth, when R4 was added to GHK, GHK-Cu, and Pal-GHK, the transdermal permeability increased in the order of GHK+R4 < GHK-Cu+R4 < Pal-GHK+R4. Finally, the addition of R6 to GHK, GHK-Cu and Pal-GHK also resulted in increased percutaneous transmittance in the order of GHK+R4 < GHK-Cu+R4 < Pal-GHK+R4. This study provides optimal conditions for enhancing skin absorption of anti-wrinkle peptides GHK, GHK-Cu, and Pal-GHK, and propose a wide range of applications in anti-wrinkle functional cosmetics by suggesting ways to maximize their efficacy.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.1
• /
• pp.29-32
• /
• 1996

In vivo and in vitro skin permeation of $recombinant^{125}$ I-EGF through normal, stripped and the first degree burn skin were studied. The in vitro skin permeation rate through the first degree burn skin $(296\;cpm/cm^2/hr)$ and the stripped skin $(1131\;cpm/cm^2/hr)$ were 3.5 times and 13 times higher, respectively, as compared with the one through normal skin. In vivo absorption study with the first degree burn skin, the peak concentration of EGF in the skin was achieved at 1-3 hr and decreased afterward up to 8 hr with an elimination constant of $1.31{\times}10^{-3}\;g/ml/hr$. To investigate the higher elimination rate of EGF in burn skin, binding and metabolism studies were conducted. No significant metabolism of EGF in burn skin $(100^{\circ}C,\;5-second\;burning)$ was observed. With the presence or unlabelled-EGF $^{125}I-EGF$ permeation through the burn skin showed higher permeation rate than the one without unlabelled-EGF. The result nay indicate that EGF-receptor binding play a role in determining the skin permeation rate.

• Toxicological Research
• /
• v.35 no.2
• /
• pp.137-154
• /
• 2019

Triclosan (TCS) is an antimicrobial compound used in consumer products. The purpose of current study was to examine toxicology and risk assessment of TCS based on available data. Acute toxicities of oral, transdermal and inhalation routes were low, and phototoxicity and neurotoxicity were not observed. Topical treatment of TCS to animal caused mild irritation. TCS did not induce reproductive and developmental toxicity in rodents. In addition, genotoxicity was not considered based on in vitro and in vivo tests of TCS. It is not classified as a carcinogen in international authorities such as International Agency for Research on Cancer (IARC). No-observed-adverse-effect level (NOAEL) was determined 12 mg/kg bw/day for TCS, based on haematoxicity and reduction of absolute and relative spleen weights in a 104-week oral toxicity study in rats. Percutaneous absorption rate was set as 14%, which was human skin absorption study reported by National Industrial Chemicals Notification and Assessment Scheme (NICNAS) (2009). The systemic exposure dosage (SED) of TCS has been derived by two scenarios depending on the cosmetics usage of Koreans. The first scenario is the combined use of representative cosmetics and oral care products. The second scenario is the combined use of rinse-off products of cleansing, deodorants, coloring products, and oral care products. SEDs have been calculated as 0.14337 mg/kg bw/day for the first scenario and 0.04733 mg/kg bw/day for the second scenario. As a result, margin of safety (MOS) for the first and second scenarios was estimated to 84 and 253.5, respectively. Based on these results, exposure of TCS contained in rinse-off products, deodorants, and coloring products would not pose a significant health risk when it is used up to 0.3%.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.116-126
• /
• 2013

Glycol ethers are a group of solvents based on alkyl ethers of ethylene glycol commonly used in paints. These solvents typically have a higher boiling point, together with the favorable solvent properties of lower-molecular weight ethers and alcohols. The word "Glycol ethers" was registered as a United States trademark by Union Carbide Corp. Typically, glycol ethers are found in pharmaceuticals, sunscreens, cosmetics, inks, dyes and water based paints. On the other hand, glycol ethers are used in degreasers, cleaners, aerosol paints and adhesives. Most glycol ethers are relatively water soluble, biodegradable and only a few are considered toxic. Therefore, they are unlikely to pose an adverse risk to the environment. Recent study suggests that occupational exposure to glycol ethers is related to low motile sperm count in men, but the finding has been disputed by others. In this study, skin permeation of 3 types glycol ethers were studied in vitro using matrix such as solvent and detergent. The absorption of glycol ethers[methyl glycol ethers(MC), ethyl glycol ethers(EC) and butyl glycol ethers(BC)] has been measured in vitro through rat skin. Epidermal membranes were set up in Franz diffusion cells and their permeability to PBS measured to establish the integrity of the skin before the glycol ethers were applied to the epidermal surface. Absorption rates for each glycol ethers were determined and permeability assessment made to quantify any irreversible alterations in barrier function due to contact with the esters. Types of glycol ethers in vitro experimental results on MC> EC> BC quickly appeared in the following order: skin permeation was beneficial to the skin permeation small molecular weight, the difference in chemical structure, such as hydrophilic, because with the partition coefficient and solubility mechanisms and passive diffusion to increase the speed at which transmission is considered.