• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.926-936
• /
• 1996

Field hulling of high-moisture paddy followed by brown rice drying offers many advantages over the present paddy harvesting and drying offers many advantages over the present paddy harvesting and drying system. We did a preliminary study of the parameters for efficient hulling of high-moisture paddy using the IRRI Centrifugal Huller and two India rice varieties. Hulling capacity , hulling efficiency , brown rice recovery and percent whole bown rice were generally best at the impeller peripheral speed of 44m/s. A second pass through the huller increased hulling capacity , brown rice revery and hulling efficiency, but reduced percent whole brown rice. To solve this , we recommed separation of paddy after hulling and aspiration such that only unhulled and partially -hulled grains will be fed back to the huller. Paddy at even 23% m.c. could be effectively hulled by the impeller-type huller , but the results were generally better at 14 to 17% m.c. Only in percent whole brown rice did the 17 to 23% m.c. range performed better than that of 14% m.c. Difference invarietal response to hulling was observed.

• Computers and Concrete
• /
• 제8권4호
• /
• pp.389-399
• /
• 2011

The increasing concern for reinforced concrete structure durability has been justifying in many ways in the last few decades. However, there is no perfect durability test method till now. In this research an alternative method, which is based on the cumulative moisture loss percent of the concrete specimens after oven-drying, was proposed to estimate the durability performance of the concrete. Two temperatures were considered for the oven-drying tests: $100^{\circ}C$ and $200^{\circ}C$. Test results showed that oven-drying at $200^{\circ}C$ was obviously an unsuitable procedure to preserve the fragile microstructure of cement-based materials. By contrast, experimental results through oven-drying at $100^{\circ}C$ allowed estimating the moisture loss percent of cement-based materials in a more rational manner. Moreover, the magnitudes of the cumulative moisture loss percent obtained from oven-drying tests at $100^{\circ}C$ for 48 hours have good correlations with the data of other well-known methods, namely, electrical resistance test, water permeability test, and mercury intrusion porosimetry test. This investigation established that regarding the oven-drying test as one of the tests for evaluating the potential durability of concrete is considerably practicable.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.152-164
• /
• 1982

1. In order to make the improvement of plywood quality, this study has been made. The pretreatments applied to the veneers are as follows. a) The soaking treatment of the veneer in 30 percent methanol solution for 24 hours was applied to remove some resinous materials which may cause many stain discolouring on the face of finished plywood. b) The preservative treatment of the veneer in 2 percent malenit solution for 2 to 3 minutes was adopted to make resistance against decay and insect damages. c) The fire retardant treatment of the veneer in 40 percent ammonium phosphate solution for 2 hours was applied to give retardation effect against fire burning. 2. The results summarized in this study are as follows. a) One percent resinous materials was extracted, after the soaking of the veneers in 30 percent diluted methanol. b) No marks of the dirty stains of resinous materials on the face of the treated plywood was shown, although many quite dirty stains on the face of untreated plywood have contrary seen. c) However, the strip shear test strength of the treated plywood was not decreased. It means that there is no difference in the strength between the treated plywood and the untreated plywood. The strength values were 25.08 kg/$cm^2$ and 24.98 kg/$cm^2$, respectively. d) The strip shear test strength of plywood made of the treated veneers in 2 percent malenit solution was not decreased. e) The slight decrease of the strip shear test strength of the treated plywood made of the treated veneer in 40 percent ammonuim phosphate solution was shown. However, the remarkable difference of the fire retardation activities between the treated specimens and the untreated specimens has seen as in Table 10, that is, the fire proofed specimens had taken about 28 seconds to start to burn, while the untreated specimens had taken 15 seconds to reach to burning. This means that the fire retardation effect of the fire proofed plywood was greater than that of the unproofed plywood.

• 자원환경지질
• /
• 제45권1호
• /
• pp.1-8
• /
• 2012

인도네시아 까시한 지역 함 동-아연 스카른광체는 올리고신 후기 퇴적암류 중 석회암층을 따라 발달한다. 스카른광체의 괴상스카른대는 초기에서 후기로 단사휘석-석류석대, 석류석대, 석류석-녹염석대, 녹염석대 스카른으로 구분된다. 초기 괴상 스카른대에서 산출하는 단사휘석은 투휘석-헤덴버가이트 고용체로서, 초기 투휘석 단성분에 가까운 조성으로부터 후기 salitic 단사휘석으로의 조성변화가 확인된다. 이러한 단사휘석의 조성변화는 일반적인 스카른 광체에서의 수반 금속성분 (Cu 및 Zn광화작용)과 단사휘석 조성 상관관계와 잘 일치한다. 석류석의 경우 그로슐라-안드라다이트 고용체로서 매우 넓은 조성변화를 보여주며, 후기 석류석의 경우 Fe함량의 증가 경향성이 인지된다. 녹염석의 경우 클리노조이사이트-피스타사이트 고용체(65.8-76.2 mol. % 클리노조이사이트)로 확인된다. 상평형관계로 확인된 까시한 지역 함 동-아연 스카른광체는 약 0.5 kb의 환경에서 초기 약 $450^{\circ}C$ (단사휘석-석류석 및 석류석 스카른, ${\approx}450-370^{\circ}C$) 에서 시작되어 후기 $300^{\circ}C$ (석류석-녹염석 및 녹염석 스카른, ${\approx}370-300^{\circ}C$) 에 걸쳐 진행되었다.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.312-319
• /
• 2017

국내 부존 청광 규조토의 고부가가치 활용을 위해 물리적인 불순물 정제 및 정제 규조토 중의 SiO2 성분을 규소원으로 한 탄화규소 분말합성에 대해 연구하였다. 청광 규조토를 hammer mill을 이용해서 분쇄한 후 체가름을 통한 입도 분리에 의해서 약 30% 정도의 철분 ($Fe_2O_3$) 정제 효과를 얻을 수 있었으며, 325 mesh 이하 입도 분말의 철분 함량은 약 2% 이었다. 습식 및 건식 자력선별의 경우 모두 철분 함량의 분리 및 정제 효과가 일부 있었지만 회수되는 비자성 부산물 중의 철분 함량이 약 2%로 잔존양이 많음을 알 수 있었다. 청광 원광의 물 침출은 철분 제거에 효과적이었으며, 물 침출 결과 약 40% 정도의 철분이 제거되었다. 또한 정제 규조토 중의 $SiO_2$ 성분을 탄소 (흑연, 카본블랙)로 환원 탄화 반응시켜 ${\beta}$-SiC를 합성하였고, 합성 분말의 산처리를 통한 철분 정제 및 비표면적 변화 등에 대해 연구하였다. 환원제로 흑연보다는 카본블랙을 사용함이 보다 효과적이었고, 산처리공정에 의해 Fe, Ca 등의 불순물들이 거의 제거되었고, 비표면적은 $52.5m^2/g$ 까지 증가하였다.

• 한국세라믹학회지
• /
• 제14권2호
• /
• pp.88-94
• /
• 1977

Zircon sand of two different particle distribution with 2 percent of ground pyrophyllite were adoted to prepare the dense specimens of the stopper nozzle for the tundish. The molding pressure of $600kg/cm^2$ brought about the superior properties to those obtained t the pressure of $300kg/cm^2$, and as the firing temperatures were increased from $1, 350^{\circ}C$ to $1, 600^{\circ}C$, the better characteristics resulted. The addition of 2 percent $MgCr_2O_4$ to zircon pyrophyllite batch was more effective in corrosion-resistance to the blast furnace-slag.

• 대한수의학회지
• /
• 제27권1호
• /
• pp.61-68
• /
• 1987

This study was conducted to determine the microorganisms inhabitating in cow genitalia and their antimicrobial drug susceptibility. During the period between July, 1985 and February, 1986, a total of 111 cow genitalia, 58 from Korean native and 53 from dairy cow, were sampled at three abattoirs. Gross pathological examination and bacterial isolation and identification were performed from the genital samples. In addition antimicrobial drug susceptibility test for the microorganisms isolated, some synergistic activity among drugs were examined on the major organism isolated from the cases of endometritis and pyometra. The results are summerized as follows: 1. Among the bacteria isolated from the genitalia, Staphylococcus spp., C. pyogenes, E. coli, Proteus spp., Streptococcus spp., Bacillus spp. were most frequently isolated whereas the genera of Pasteurella, Pseudomonas, Klebsiella and Yersina were detected far less frequently. 2. In Korean native cow the genera of Straphylococcus and Steptococcus were more isolated than dairy cow while in dairy cow the genera of Corynebacterium, Proteus, Escherichia were more of ten isolated than Korean native cow. 3. From cow genital organs showing lesions of endometritis and prometra, C. pyogenes was most frequently isolated, the isolation rate being 60 percent, and follow by Staphylococcus spp., Proteus spp., E. coli and Pasteurella spp. in the order. 4. Antimicrobial drug susceptibility test conducted on the major organisms isolated showed that all the isolates were susceptible to gentamicin, cephalosporin and sulfisoxazole, but resistant to tetracycline and penicillin. 5. Twenty-nine isolates of C. pyogenes were submitted to the synergistic activity test of cephalosporin, kanamycin and streptomycin with penicillin. Synergists were demonstrated in 90 percent, 31 percent and 27 percent of isolates examined by the combined use of penicillin and cephalosporin, penicillin and kanamycin, penicillin and streptomycin, respectively. About 10 percent of the isolates were found to be indifferent by the synergism test.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.4-12
• /
• 2005

The purpose of this study was to analyze the utilization of Fashion Brands Web-site. This analysis was done by 6C Concept(Contents, Community, Commerce, Connection, Customizing, Communication) which was Internet Marketing Strategy. The review of previous studies and empirical investigations through the Internet were processed for this study. 151 fashion brands in department stores in Daegu, Korea were surveyed from January to February 2004. Data were analyzed by using frequency and percentage. Total 105 brands established their Web-Sites of Internet out of 151(69.5%) fashion brands. There were four characters on Contents, six characters on Connection and five characters on Communication. And there were a establishing rate of 38.1 percent on Online Community and 30.5 percent on Online Shopping Mall. On Customizing, 73.3 percent of brands had e-CRM systems.

• 대한화학회지
• /
• 제11권1호
• /
• pp.28-32
• /
• 1967

The direct acid leaching of domestic Marmatite concentrate at elevated temperatures and pressures was investigated. Almost 100 percent of zinc was extracted from the concentrate liberating free sulfur in 4 hours at $100^{\circ}C$ when the oxygen partial pressure was 5 atm. in sulfuric acid solution. By applying the Arrhenius equation to leach reaction in the range of $60^{circ}$ to $100^{\circ}C$ at the same oxygen partial pressure, 15.7 kcal per mole of activation energy was calculated. At the initial stage of leaching, the rate of reaction increased linearly by increasing temperature and pressure. The concentration of sulfuric acid gave minor effect to leaching velocity in the range of 5 to 20 percent. The particle size should be under 270 mesh for 100 percent extraction of zinc.

• Journal of the Korean Wood Science and Technology
• /
• 제1권2호
• /
• pp.3-10
• /
• 1973

This study was carried out to examine the characeristics of waste sanders(S)from. plywood and pre-finishing plywood surface sanding and double saw finishing, as a new extander in urea-formaldehyde resin(UFR) in plywood adhesive, and to focus, adhesive strength using the glue extended with milled sanders(MS) as extender, leveling the optimum amount of MS to be added, and examining the physical properties of glue extended MS & S. Also economical good feasibility of substitution for wheat flour(WF) with MS as a new extender is analyzed and presented in details. Selecting three standard samples of 80, 100 and 180 mesh, sorking them in distilled water at $20^{\circ}C$, 24 hours, redrying at $105^{\circ}C$ and rescreening the sample with standard screen, again, the 3 samples of 80, 100, and 180 mesh are passed 23 percent through 80 mesh sander standard sample 27 percent through on 100 mesh and only 10.9 percent through 180 mesh, respectively. The particle size of retained parts are greater in size of redried form. It seems undoubtly that particles to be extended in glue are got swollen and become greater in size and coarser in shape. The shape of fresh S particles are irregular thin needle with small scale, as shown in Figure 5. PFS are so finer than plywood S that only 9.8 percent of the S retained on 100 mest screen, 24. 30 percent on 100-160 mesh, and 65.9% on 160-180 mesh. But particle size of the fresh S is large enough to make the viscosity of glue direct extended with S too high to apply it glue spreader. The glue extended with milled sanders(MS). 3 hours milled PFS or 6 hours milled plywood S, having particle sizes shown in Tables 7 and 8, as ratio of Reain/MS/WF/water: 100/8/8/10, indicate good viscosity of 16 to 24 ps, as shown in Figure 5, for applying direct to glue spreader, have high tensile-shear strength (adhesive strength), 102.4 kp/$cm^2$, and 94 percent wood failure.