• Journal of Welding and Joining
• /
• 제3권2호
• /
• pp.52-63
• /
• 1985

Fillet welded joints, specially in ship structure, are well known the critical part where stress concentrate or crack initiates and grows. This paper is concerned with the study of the behavior of fatigue crack growth t the root and toe of load carrying cruciform fillet welded joints under three points bending by the determination of stress intensity factor from the J-Integral, using the Finite Element Method. The stress intensity factor was investigated in accordance to the variation of the weld size (H/Tp). weld penetration (a/W) and plate thickness (2a'/Tp). As mixed mode is occurred on account of shearing force under the three points bending, Stern's reciprocal theory is applied to confirm which mode is the major one. The main results may be summarized as follows 1) The calculation formula of the stress intensity factor at the both of root and toe of the joint was obtained to estimate the stress intensity factor in the arbitrary case. 2) The change of stress field around crack tip gives much influence on each other at the roof and toe as H/Tp decreases. 3) Mode I is a major mode under the three points bending.

• 대한기계학회논문집A
• /
• 제37권9호
• /
• pp.1159-1168
• /
• 2013

가압형 경수로 원자로의 압력용기 상부헤드 관통노즐 J-groove 용접부 주변에서 일차수응력부식균열(PWSCC)로 인한 냉각수 누설사례가 발생하고 있다. 본 연구에서는 PWSCC 의 주요 원인 중 하나인 용접 잔류응력을 유한요소 해석을 이용해 평가하고 원자력 발전소의 정상가동 조건을 해석에 반영하는 방법이 용접잔류응력 분포에 미치는 영향에 대한 분석을 수행하였다. 또한 반복되는 원자력 발전소의 가동 주기가 용접잔류응력 분포에 미치는 영향을 확인하여 정상가동조건에서의 정확한 용접 잔류응력을 예측할 수 있는 방법을 분석하였다.

• Journal of Welding and Joining
• /
• 제28권3호
• /
• pp.92-98
• /
• 2010

Ferritic stainless steels, which have relatively small thermal expansion coefficient and excellent corrosion resistance, are increasingly being used in vehicle manufacturing, in order to increase the lifetime of exhaust manifold parts. But, there are limits on use because of the problem related to cosmetic resistance, corrosions of condensation and high temperature salt etc. So, Aluminum-coated stainless steel instead of ferritic stainless steel are utilized in these parts due to the improved properties. In this investigation, Al-8wt% Si alloy coated 409L ferritic stainless steel was used as the base metal during Gas Tungsten Arc(GTA) welding. The effects of coated layer on the microstructure and hardness were investigated. Full penetration was obtained, when the welding current was higher than 90A and the welding speed was lower than 0.52m/min. Grain size was the largest in fusion zone and decreased from near HAZ to base metal. As welding speed increased, grain size of fusion zone decreased, and there was no big change in HAZ. Hardness had a peak value in the fusion zone and decreased from the bond line to the base metal. The highest hardness in the fusion zone resulted from the fine re-precipitation of the coarse TiN and Ti(C, N) existed in the base metal during melting and solidification process and the presence of fine $Al_2O_3$ and $SiO_2$ formed by the migration of the elements, Al and Si, from the melted coating layer into the fusion zone.

• Corrosion Science and Technology
• /
• 제3권2호
• /
• pp.67-71
• /
• 2004

Galvanized Steel pipes have been widely used in industries and apartments, Unexpected early leakage has been found in an apartment. Tunneling corrosion or penetration was found in the water supply pipes. The chemical compositions of the pipes and properties of coating layer were evaluated. The pipes met the specification of KS D 3507. The cause of early failure was analyzed through the examination of macrostructures and microstructures, It was found that the pipes were failed by grooving corrosion, which resulted from galvanic corrosion of weld bead and matrix.

• 한국생산제조학회지
• /
• 제9권1호
• /
• pp.119-127
• /
• 2000

In this study the classified researches the artificial and natural flaws in welding parts are performed using the pattern recognition technology. For this purpose the signal pattern recognition package including the user defined function was developed and the total procedure including the digital signal processing feature extraction feature selection and classifi-er selection is teated by bulk,. Specially it is composed with and discussed using the statistical classifier such as the linear discriminant function the empirical Bayesian classifier. Also the pattern recognition technology is applied to classifica-tion problem of natural flaw(i.e multiple classification problem-crack lack of penetration lack of fusion porosity and slag inclusion the planar and volumetric flaw classification problem), According to this result it is possible to acquire the recognition rate of 83% above even through it is different a little according to domain extracting the feature and the classifier.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.258-261
• /
• 1998

Induction heating is commonly used in process heating prior to metal working and in heat treationg, welding, and melting. For an analysis of induction heating system, it is necessary to calculate eddy currents in conductors induced by a source current. This study examines the use of the Impedance Boundary Condition for the reduction of the field problem encountered in the computation of eddy currents in non-magnetic and magnetic conductors with small penetration depths to a simpler exterior problem. The electric field intensities on the conductor surfaces computed by using the IBC are compared with the values obtained from the full region solution (i.e. without the use of IBC) and those agree well with the latter.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1996년도 특별강연 및 추계학술발표 개요집
• /
• pp.19-34
• /
• 1996

A review was made of fatigue failures of nuclear power plant components in Japan, which were experienced in service and during periodical inspection. No case has been recently reported of a service fatigue failure of a reactor pressure vessel itself, excluding nozzle corner cracks, that occurred many years ago. But, service fatigue failures have been occasionally experienced in piping systems, pumps, and valves, on which fatigue design seems to have been inadequately applied. The causes of fatigue failures can be divided into two categories: mechanical-vibration-induced fatigue and thermal-fluctuation-induced fatigue. Vibration-induced fatigue failure occurs more frequently than is generally thought. The lesson gleaned from the present survey is a recognition that a service fatigue failure may occur due to any one or a combination of the following factors: (1) lack of communication between designers and fabrication engineers, (2) lack of knowledge about a possibility of fatigue failure and poor consideration about the effects of residual stresses, (3) lack of consideration on possible vibration in the design and fabrication stages, and (4) lack of fusion or poor penetration in a welded joint.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.185-187
• /
• 2005

The reactor pressure vessel head of PWR has penetrations for control rod drive mechanism and instrumentation systems. The Primary coolant water and operating temperature can cause the stress-corrosion cracking of these nickel-based alloy penetrations. It is difficult to detect and size flaws such as SCC in the reactor head penetrations using conventional W methods because of complex geometry, Therefore, the utilities are using the TOFD technique for the detection and sizing of the flaw. This study shows the correlation between the ultrasonic wave direction and the orientation of the flaw and the range of flaw depth which can be detected by the TOFD techniques.

• 한국강구조학회 논문집
• /
• 제20권6호
• /
• pp.817-827
• /
• 2008

본 연구에서는 기존 SM490강재와 국내에서 최근 개발된 내진용강재(SHN490, SN490)로 이루어진 특수모멘트골조의 기둥이음부를 부분용입용접으로 설계하여 내진성능평가를 위한 실물대 실험을 실시하였다. 부분용입용접에 의한 기둥이음부는 용접비용 및 공기의 절감에서 매력적 인 방안이다. 그러나 과거에 외국에서 수행된 몇몇 실험결과에 의하면 부분용입용접에 의한 후판기둥의 이음부는 인장응력에 대해 취성파단하는 거동을 보였다. 이런 이유로 인해 최근의 내진설계기준에서는 특수모멘트골조의 부분용입용접 기둥이음부의 강도는 예상 기둥소성모멘트 이상의 강도를 요구한다. 이를 반영하여 시험체의 부분용입용접 이음부의 설계강도는 AISC-LRFD의 기준식을 적용하여 기둥의 예상 소성모멘트 이상이 되도록 설계 및 제작하고 3등분점 하중으로 단조가력하였다. 압연형강 시험체 2개 및 조립형강 시험체 2개(총 4개 시험체)의 이음부 모두에서 기둥의 실제 소성모멘트 이상의 강도를 발휘하였다. 즉 AISC-LRFD의 부분용입용접 설계강도식의 신뢰성을 확인할 수 있었다. 다만 SM490 압연형강 시험체는 기둥의 소성모멘트를 발휘한 후 이음부에서 급격한 취성파단이 발생하였다. 이는 용접결함과 플랜지의 강도미달에 따른 복합적 원인에 의한 것으로 추정된다. 특히 SM490 강재의 경우는 항복강도와 인장강도가 규정치에 미달하는 등 성능편차가 큰 것으로 나타났다. 제한적 실험결과이긴 하지만 소재물성 및 이음부 거동의 측면 모두에서 내진용 신강재가 기존강재에 비해 전체적으로 우수함을 보여준 결과라 할 수 있다.

• 한국정보통신학회논문지
• /
• 제5권5호
• /
• pp.985-993
• /
• 2001

본 연구에서는 플라즈마 감시에 의한 용접성 평가방식과 효율적인 감시 알고리즘을 위한 시뮬레이션 툴의 개발을 목표로 한다. 레이저 용접 시 발생하는 플라즈마를 검출하기 위하여 플라즈마에서 발생하는 자외선신호를 반도체 광 센서를 사용하여 검출하고, 감시장치로 쓰이는 개인용 컴퓨터에 고속으로 전달, 저장하는 장치와 전달된 신호를 이용하여 용접 결함을 검출하는 모니터링 시스템을 개발하였다. 이 장치를 사용하여 용접 데이터베이스를 구축하고, 용접성과 플라즈마 신호와의 관계를 평가하고, 분석하였으며 특히 용접 결함 검출 모니터링에 적합한 특징의 선택, 결정을 위한 특징의 수, 분류기 사이의 비교 등을 위하여 오프라인 상태에서 시스템 구현에 적합한 특징의 선택, 결정을 위한 특징의 수, 분류기 사이의 비교 등을 비교 분석할 수 있는 시뮬레이션 툴의 개발과 이를 실제 시스템에 구현하는 방식을 취하였다. 목표로 하고 있는 시스템은 신뢰성 있고 효율적인 레이저 용접 결함 감시 시스템이며 이의 구현을 위해 용접 품질 모니터링 프로그램 중 분류기와 GUI을 구현하였으며 Perceptron, Wavelet, MLP 등을 적용하여 이의 결과가 실제 실시간 품질 해석에 적합한 데이터로 사용할 수 있는가에 대한 분석도 행하였다.