• Computers and Concrete
• /
• 제17권2호
• /
• pp.189-199
• /
• 2016

Chloride penetration is considered as a most crucial factor for the determination of the service life of concrete. A lot of experimental tools for the chloride penetration into concrete have been developed, however, the mechanism was based on only diffusion, although permeability is also main driving forces for the chloride penetration. Permeation reacts on submerged concrete impacting for short to long term durability while capillary suction occurs on only dried concrete for very early time. Furthermore, hydrostatic pressure increases in proportional to measured depth from the surface of water because of the increasing weight of water exerting downward force from above. It is thought, therefore, that the water pressure has a great influence on the chloride penetration and thereby on the service life of marine concrete. In this study, new experiment is designed to examine the effect of water pressure on chloride penetration in concrete quantitatively. As an experiment result, pressure leaded a quick chlorides penetration by a certain depth, while diffusion induced chlorides to penetrate inward slowly. Therefore, it was concluded that chloride should penetrates significantly by water pressure and the phenomena should be accelerated for concrete exposed to deep sea. The research is expected as a framework to define the service life of submerged concrete with water pressure and compute water permeability coefficient of cementitious materials.

• 한국시뮬레이션학회논문지
• /
• 제27권3호
• /
• pp.109-116
• /
• 2018

견고표적을 무력화하기 위해서는 높은 침투/관통성능을 가진 침투탄의 개발이 필수적이다. 침투탄의 설계를 위해, 본 논문에서는 노즈 형상 인자들이 침투자의 콘크리트 침투/관통성능에 미치는 영향을 분석하였다. 전산해석은 상용 전산해석 프로그램인 AUTODYN-2D를 사용하여 수행하였다. Forrestal의 시험결과를 사용하여 전산해석의 신뢰성을 검증하였으며, 침투자의 노즈 형상보다는 노즈 길이가 침투/관통성능에 더 큰 영향을 미치는 것을 확인하였다. 또한, 침투자의 노즈 길이가 일정할 경우, 노즈 팁 직경을 특정값까지 증가시켜 침투/관통성능을 향상시킬 수 있음을 확인하였다.

• 한국전산구조공학회논문집
• /
• 제32권2호
• /
• pp.133-140
• /
• 2019

본 논문은 Shaped charge jet(SCJ)의 관통 과정을 유한요소해석을 통해 모사하여 제트 입사속도, 관통률 그리고 관통량 증분과 같은 물리량들을 획득하였다. 이 물리량들을 hydrodynamic 이론에 적용하여 입사 제트 속도의 효율을 분석한 결과, 입사 속도가 빠른 제트의 관통 효율은 이어지는 느린 제트에 비해 높은 것을 확인하였다. 이 효율은 hydrodynamic limit(HL) 미만인 제트인 경우 큰 폭으로 감소하였다. 한편, 시간에 따른 관통량 증분과 제트 소모량의 비교는 SCJ의 이론적인 관통현상 분석을 위해서는 길이 연장 효과를 고려해야함을 보였다.

• Restorative Dentistry and Endodontics
• /
• 제13권1호
• /
• pp.151-158
• /
• 1988

The purpose of this study was to evaluate the effect of canal filling methods and post-space preparation time on the apical seal of endodontically treated teeth. Seventy-six single-rooted human teeth were divided into 6 groups and each tooth was obturated and prepared post-space according to the purpose of this study. After all specimens were immersed in Indian ink, decalcified and cleared, the degree of dye penetration into the root canals observed by magnifying glass (X20) and measured by caliper. The results were as follows: 1. In the thermatic condensation, no significant difference in ink penetration occured when the post-spaces were created immediately after obturation or when they were made a week later. 2. In the lateral condensation, no significant difference in ink penetration existed between teeth whose post-space were prepared immediately or delayed. 3. In comparison of experimental groups and control groups, no significant difference showed when the groups were obturated with McSpadden compactor but when the teeth were laterally condensed, the experimental groups showed less ink penetration than controls. 4. Thermatic condensed teeth with McSpadden compactor were less ink penetration thn laterally condensed teeth.

• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.161-168
• /
• 1984

The purpose of this study was to examine the effect of heat generated by rotating bur on the dental hard tissue in vitro. Freshly extracted molar teeth with normal appearance from early 20's male were collected and experimental teeth were divided into 4 groups and the teeth in each group were prepared class I cavity with different clinical procedures as follows. The four methods were. I. 20,000rpm without coolant II. 20,000rpm with coolant III. 500,000rpm without coolant IV. 500,000rpm with coolant Five teeth were reserved intact as a control group. These teeth were longitudinally split into two parts by means of chisel after class I cavity preparation. In a control group 5 parts were boiled in water for 20 minutes and the other 5 specimens were not boiled. All specimens were immersed in 2% methylene blue dye solution and the image of dye penetration was examined and photographed under stereomicroscope. Followings were the results obtained through the study. 1. In control group, dye penetration of the unboiled specimens was increased than with the boiled group. 2. The specimens prepared cavity without coolant showed decreased dye penetration than with the coolant group. 3. 20,000rpm without coolant group showed the least dye penetration. 4. 500,000rpm with coolant group showed similar level of dye penetration to the unboiled specimens from the control group.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.945-948
• /
• 2006

Chloride penetration into concrete is a hot issue of concern all over the world, notwithstanding, very few attempts have been conducted to explore the effect of cracks on choride penetration. Cracks provoke to lose a main function of watertightness of concrete and lead to reduce the service life of concrete. For this reason, it is necessary to define a critical crack width to prevent a quick chloride penetration through crack. In this study, experiment is focused on establishing a critical crack width in terms of chloride penetration. Concrete specimens with different crack widths I crack lengths have been subjected to rapid chloride migration testing. In a side of analytical solution, a simple approach to quantify the chloride diffusion coefficient of only crack zone excluding sound concrete was proposed. The result clearly showed a critical crack width of 0.03 mm. Based on the experimental results, a phenomenological model was proposed to explain the meaning of critical crack width in practical engineering. In this model, cracked concrete zone was divided into three zones. These zones corresponded to a wide crack, a zone with micro-cracks and an uncracked zone.

• Journal of Pharmaceutical Investigation
• /
• 제30권4호
• /
• pp.273-278
• /
• 2000

Several topical preparations containing lidocaine, a widely used local anesthetic agent, have been developed and marketed recently for the treatment of premature ejaculation. In this study, microemulsion(ME)-based hydrogels containing lidocaine were prepared by dispersing ME to hydrogel bases such as Carbopol, sod. alginate, and sod. carboxymethylcellulose. Lidocaine-containing ME was thermodynamically stable over 6 months and had a diameter ranging from 10 to 100 nm. In vitro skin penetration of lidocaine from ME-based hydrogels followed apparent zero-order kinetics. ME-based hydrogel showed higher drug penetration during fifteen minutes after application than alcoholic hydrogel, reference preparation. Tail flick test in rat was introduced to compare in vivo local anesthetic effects of different hydrogels, and the results showed that ME-based hydrogels are superior to other hydrogels. In optical microscopy, recrystallization of lidocaine was observed within 5 min after application of reference hydrogel, but there was no change in ME-based hydrogels even after 30 minnute. These results indicated that ME-based hydrogels had some advantages in skin penetration, anesthetic effect and physical stability compared with alcoholic hydrogels. Finally it is possible to conclude that ME-based hydrogels containing lidocaine is a good topical drug delivery system for the treatment of premature ejaculation.

• Journal of Welding and Joining
• /
• 제16권1호
• /
• pp.77-87
• /
• 1998

This paper deals with the effect of laser welding parameters on the weld formation. Thin steels for automotive application were prepared so as to be welded with high power carbon dioxide laser system. Major process parameters were position of focus and travel speed. The effect of shielding gas was also discussed by employing the high speed photometry. Test results showed that the optimal position of focus varied in accordance with the joint configuration; bead-on-plate, butt or lap welding. It was recommended that the position of focus for the lap welding be located at slightly inner part of the material to be welded. In this case, however, it was noticeable that the weld penetration ratio, d/t$_{0}$ dropped drastically at the critical region. Results also demonstrated that both the bead width and penetration reduced as the travel speed increased. The penetration ratio showed two distinct regions; stabilized zone at the lower range of the travel spped and sudden drop zone at the higher range of travel speed. Lower limit of the penetration for acceptable weld was proved to be about 90% of the parent metal thickness based on the physical properties of the weld. Mixed gas application for both the shielding of molten metal and laser induced plasma control was recommended as far as the penetration was concerned.d.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권1호
• /
• pp.17-24
• /
• 2005

The characteristics of diesel spray have effect on the engine Performance such as power. fuel consumption and emissions. Therefore, This study was Performed to investigate the effect of various injection parameters. In this study. the experiment is performed by using the high temperature and high pressure chamber. Spray behaviors are visualized by using the high speed camera and spray angle. Penetration etc. are measured. Experimental results are summarized as follows ; 1) Correlations of spray Penetration is expressed as follows $$0 $$t_b 2) Correlations of spray Angle is expressed as follows $$T_a=293K \;;\; tan({\theta}/2)=0.59({\rho}_a/{\rho}_f)^{0.437}$$ $$T_a=473K\;;\; tan({\theta}/2)=0.588({\rho}_a/{\rho}_f)^{0.404}$$ 3) The measured macro characteristics - spray tip penetration and spray angle agreed well with established correlations.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.467-468
• /
• 2010

염소이온 침투에 의한 콘크리트의 내구성 저하를 고찰하기 위하여 빠른 시간 내에 염소이온의 침투성을 추정할 수 있는 실험 방법론 및 이론적 해석방법이 다수 제안되었으며 이를 고려한 콘크리트의 내구성 설계 시스템의 개발은 활발히 연구되어 왔다. 그러나, 실제 환경에서 공용 중인 대다수의 콘크리트 구조물에는 환경, 하중 조건, 재료 및 시공 상의 이유로 균열이 존재함에도 불구하고, 대부분의 연구들이 비균열된 콘크리트를 대상으로 염소이온 확산계수의 추정 및 염소이온 프로파일의 예측 등에 집중되었다. 그래서 본 연구에서는 콘크리트의 미세균열이 염소이온 침투에 미치는 영향을 고찰하기 위한 연구의 일환으로 장, 단기 침투 실험결과를 고찰하고 이를 토대로 해석기법 개발의 전략을 수립하고자 한다.