• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1236-1249
• /
• 2021

Although there are still controversial opinions and uncertainty on application of SiC_f/SiC composite cladding as next-generation cladding material for its great oxidation resistance in high temperature steam environment and other outstanding advantages, it cannot deny that SiC_f/SiC cladding is a potential accident tolerant fuel (ATF) cladding with high research priority and still in the engineering design stage for now. However, considering its disadvantages, such as low irradiated thermal conductivity, ductility that barely not exist, further evaluations of its in-pile behaviors are still necessary. Based on the self-developed code we recently updated, relevant thermohydraulic and mechanical models in FROBA-ATF were applied to simulate the cladding behaviors under normal and accident conditions in this paper. Even through steady-state performance analysis revealed that this kind of cladding material could greatly reduce the oxidation thickness, the thermal performance of UO₂-SiC was poor due to its low inpile thermal conductivity and creep rate. Besides, the risk of failure exists when reactor power decreased. With geometry optimization and dopant addition in pellets, the steady-state performance of UO₂-SiC was enhanced and the failure risk was reduced. The thermal and mechanical performance of the improved UO₂-SiC was further evaluated under Loss of coolant accident (LOCA) and Reactivity Initiated Accident (RIA) conditions. Transient results showed that the optimized ATF had better thermal performance, lower cladding hoop stress, and could provide more coping time under accident conditions.

• Journal of Biomedical and Translational Research
• /
• v.19 no.4
• /
• pp.103-109
• /
• 2018

Aspergillus luchuensis 34-1 was inoculated into wheat pellets with different conditions of raw materials to produce nuruk. The degree of substrate reactivity improvement of steam treated raw materials compared with that of non-heat treated was analyzed. The water content of the pellet was adjusted to 25% and 35%, and steam treatment for 10 minutes improved the substrate reactivity at 2.1-fold and 3.1-fold, and sterilization was also possible. The characteristics of improvement pellet nuruk were investigated according to the degree of crushing and water content of raw materials according to the temperatures and humidities ($23^{\circ}C$, $30^{\circ}C$ and RH 60%, RH 80%). The pH of the pellet nuruk was higher depending on the temperature, humidity and moisture content of the koji were lower, and the pH of the flour-pellet nuruk was lower than that of 2 mm milling wheat-pellet nuruk according to milling degree. It can be seen that the milling degree affects the growth of mold. The acidity and amino acid were generally higher as fermentation time increased. Also, the higher the incubation temperature, humidity and moisture content, the higher the value. Glucoamylase activity was significantly the highest in moisture content 35% D2b nuruk, cultured at $30^{\circ}C$ and 80% RH for 38 hours. This is higher than the previous reports on glucoamylase of rice-koji or commercial nuruk using fungi isolated from traditional nuruk. From these study, it is expected that making of improvement pellet nuruk would save the fermentation time considerably compared with traditional nuruks.

• Journal of Korean Medical classics
• /
• v.32 no.2
• /
• pp.71-92
• /
• 2019

Objectives : To examine various ways non-glutinous rice has been applied in different formulas of "Shanghanlun" and the relationship between non-glutinous rice and the formulas' effects. Methods : First, texts that included non-glutinous rice were selected from the "Shanghanlun". Then, they were categorized according to the application of non-glutinous rice, followed by analysis of its relationship with each formula. Results : Most formulas that used non-glutinous rice in raw form when decocting with other ingredients included Shigao. Non-glutinous rice alleviates coldness of Shigao as in the case with Taohuatang where it stops diarrhea. Non-glutinous rice used in Wumeiwan warms the center and boosts Qi and helps the medicinal ingredients to bind when made into pellets. In Guizhitang and Lizhongwan, non-glutinous rice assists Stomach Qi. In Shizaotang, porridge is taken after diarrhea to help quick recovery. To prevent damage of Zheng Qi, Baisan can be mixed with rice water for administration. The level of cathartic effect can be managed through giving cold or hot porridge to the patient according to his/her response to the medicine. Mazirenwan, Mulizexiesan, Banxiasan, Sinisan, Wulingsan are mixed in rice water for administration. It makes it easier to swallow than when mixed with plain water. The application of rice flour is either internal or external. In Zhufutang, where rice flour is parched, it harmonizes the center and stops diarrhea. In Daqinglongtang when there is too much perspiration, warm powder is sprinkled on the skin to stop sweating. Clear porridge in Jiuziyisifang and rice flour in Shechuangzisan were exclusive to "Jinguiyaolue", while Baisan and rice water mixture could only be found in "Shanghanlun". Conclusions : The excavation and research on various ways non-glutinous rice was applied in treatment holds certain meaning in contemporary practice of Korean Medicine where treatment leans heavily on medicinal treatment rather than food, and all ingredients are boiled together in large quantities for most decoctions.

• Progress in Superconductivity and Cryogenics
• /
• v.23 no.3
• /
• pp.45-50
• /
• 2021

In this study, the effect of the size of B powder on the critical current density (J_c) of MgB₂ prepared by an in situ reaction process was investigated. Various combinations of B powders were made using a micron B, ball-milled B and nano B powders. Micron B powder was reduced by ball milling and the milled B powder was mixed with the micron B or nano B powder. The mixing ratios of the milled B and micron or nano B were 100:0, 50:50 and 0:100. Non-milled micron B powder was also mixed with nano powder in the same ratios. Pellets of (2B+Mg) prepared with various B mixing ratios were heat-treated to form MgB₂. T_c of MgB₂ decreased slightly when the milled B was used, whereas the J_c of MgB₂ increased with increasing amount of the milled B or the nano powder. The used of the milled B and nano B power promoted the formation MgB₂ during heat treatment. In addition to the enhanced formation of MgB₂, the use of the powders reduced the grain size of MgB₂. The use of the milled and nano B powder increased the J_c of MgB₂. The highest J_c was achieved when 100% nano B powder was used. The J_c enhancement is attributed to the high volume fraction of the superconducting phase (MgB₂) and the large grain boundaries, which induces the flux pinning at the magnetic fields.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.271-278
• /
• 2018

Background: The chondrogenic differentiation of mesenchymal stem cells (MSCs) is regulated by many factors, including oxygen tensions, growth factors, and cytokines. Evidences have suggested that low oxygen tension seems to be an important regulatory factor in the proliferation and chondrogenic differentiation in various MSCs. Recent studies report that synovium-derived mesenchymal stem cells (SDSCs) are a potential source of stem cells for the repair of articular cartilage defects. But, the effect of low oxygen tension on the proliferation and chondrogenic differentiation in SDSCs has not characterized. In this study, we investigated the effects of hypoxia on proliferation and chondrogenesis in SDSCs. Method: SDSCs were isolated from patients with osteoarthritis at total knee replacement. To determine the effect of oxygen tension on proliferation and colony-forming characteristics of SDSCs, A colony-forming unit (CFU) assay and cell counting-based proliferation assay were performed under normoxic (21% oxygen) or hypoxic (5% oxygen). For in vitro chondrogenic differentiation, SDSCs were concentrated to form pellets and subjected to conditions appropriate for chondrogenic differentiation under normoxia and hypoxia, followed by the analysis for the expression of genes and proteins of chondrogenesis. qRT-PCR, histological assay, and glycosoaminoglycan assays were determined to assess chondrogenesis. Results: Low oxygen condition significantly increased proliferation and colony-forming characteristics of SDSCs compared to that of SDSCs under normoxic culture. Similar pellet size and weight were found for chondrogensis period under hypoxia and normoxia condition. The mRNA expression of types II collagen, aggrecan, and the transcription factor SOX9 was increased under hypoxia condition. Histological sections stained with Safranin-O demonstrated that hypoxic conditions had increased proteoglycan synthesis. Immunohistochemistry for types II collagen demonstrated that hypoxic culture of SDSCs increased type II collagen expression. In addition, GAG deposition was significantly higher in hypoxia compared with normoxia at 21 days of differentiation. Conclusion: These findings show that hypoxia condition has an important role in regulating the synthesis ECM matrix by SDSCs as they undergo chondrogenesis. This has important implications for cartilage tissue engineering applications of SDSCs.

• Journal of Microbiology and Biotechnology
• /
• v.31 no.6
• /
• pp.815-822
• /
• 2021

Indigenous fungus-feeding nematodes may adversely affect the growth and activity of introduced biocontrol fungi. Alginate pellets of the biocontrol fungus Trichoderma harzianum ThzID1-M3 and sclerotia of the fungal plant pathogen Sclerotinia sclerotiorum were added to nonsterile soil at a soil water potential of -50 or -1,000 kPa. The biomass of ThzID1-M3, nematode populations, and extent of colonization of sclerotia by ThzID1-M3 were monitored over time. The presence of ThzID1-M3 increased the nematode population under both moisture regimes (p < 0.05), and fungivores comprised 69-75% of the nematode population. By day 5, the biomass of ThzID1-M3b and its colonization of sclerotia increased and were strongly correlated (R² = 0.98), followed by a rapid reduction, under both regimes. At -50 kPa (the wetter of the two environments), fungal biomass and colonization by ThzID1-M3 were less, in the period from 5 to 20 days, while fungivores were more abundant. These results indicate that ThzID1-M3 stimulated the population growth of fungivorous nematodes, which in turn, reduced the biocontrol ability of the fungus to mycoparasitize sclerotia. However, colonization incidence reached 100% by day 5 and remained so for the experimental period under both regimes, although hyphal fragments disappeared by day 20. Our results suggest that indigenous fungivores are an important constraint for the biocontrol activity of introduced fungi, and sclerotia can provide spatial refuge for biocontrol fungi from the feeding activity of fungivorous nematodes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.6
• /
• pp.894-899
• /
• 2020

This study investigated the effects of inclusion of pollock oil (PO) in the diet of broodstock on the egg and larval quality of Walleye Pollock Gadus chalcogrammus. The experimental diet comprised of semi-moist pellets prepared either with or without PO (control; Con). The fish assigned to each diet were fed to visual satiation (two meals per day) for 12 weeks. Eggs spawned from both groups of fish were sampled during the spawning season (three months) and the egg and larval quality was determined. Total egg volume, fertilization, and hatchability of eggs from the PO group were higher than those of the Con group. Fatty acid composition of fertilized eggs was not affected by the experimental diet. Oleic acid, eicosapentaenoic acid, and docosahexaenoic acid content in larvae of the PO group was higher than that in larvae of the Con group. These results demonstrate the beneficial effects of including PO in the broodstock diet of Walleye Pollock, specifically on the quality of the eggs (total egg volume, fertilization, and hatchability) and larvae (fatty acid composition).

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_1
• /
• pp.149-159
• /
• 2022

Biomass is material that is comprehensive of carbonaceous materials from plants, crops, animals, and algae. It has been used as one of heating fuel since the beginning the emergence of human beings. Since biomass is regarded as carbon-neutral energy source, it has recently been attracting attention as an energy source that can replace fossil fuels. The most widely applied field is distributed power generation, and a method of generating electric power by driving an internal combustion engine with syngas produced by gasifier is chosen. While the composition of the syngas produced in gasifiers changes depending on the air flowing into the reactor, commercialized gasifiers so far do not control the air flowing into the reactor. When the inner pressure in reactor increases, the air sucked into the reactor is reduced. That change of amount of air makes the composition of syngas varied. Those variations of composition of syngas cause the incomplete combustion hence the power output of engine drops, which is a critical weakness of the gasification technology. In this paper, to produce the uniformly composed syngas, PID control is applied. The result was shown when the amount of air into the reactor is supplied with the constant amount using PID control, the standard deviation of caloric values of syngas is around 2[%] of its average value. Meanwhile the gasifier without PID control has the standard deviation of caloric values is around 7[%]. Therefore, Adopting PID control to supply constant air to the gasifier is highly desirable.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.4
• /
• pp.569-576
• /
• 2022

In this study, the healing performance of hybrid self-healing concrete was investigated by mixing bacterial pellets(BP) and solid phase capsules(SC), respectively, based on organic-inorganic self-healing material(MC). Constant water head permeability test was applied as a method of evaluating the healing performance, and the healing rate and the healed crack width calculated by the equivalent crack width were used as evaluation indicies. As a result of the water permeability test, when the initial crack width was 0.3 mm, the healing rates of MC-BP and MC-SC were 2.1~3.0 %pt higher than that of MC, and the healed crack width of hybrid concrete increased by 0.017~0.018 mm. In conclusion, it was found that the self-healing performance was not significantly improved even if the two types of healing materials are used together.

• Plant Journal
• /
• v.18 no.3
• /
• pp.28-40
• /
• 2022

As the proportion of renewable energy generation is expected to increase, public power generation businesses need to actively consider implementing the expansion of biomass mixing, In this study, the biomass co-firing rate is being changed from 0wt.% to 5.0wt.% at 500MW coal-fired power plant, measuring the major operation characteristics of the pulverizer. First, the composition analysis and grinding characteristics of lignocelluosic biomass were examined, and the effect of volume increase on dirrerential bowl pressure difference, motor current, coal spillage, outlet temperature, and internal fire count was analyzed. As the co-firing rate increased, it was confirmed that the difference in the differential bowl pressure, motor current, and coal spillage treated increased, and the outlet temperature was minimal. The number of internal fires is difficult to find a clear correlation, but it has been confirmed that it is highly likely to occur in combination with other driving factors.