• Electrical & Electronic Materials
• /
• v.7 no.3
• /
• pp.243-251
• /
• 1994

ITO(Indium Tin Oxide) film with thickness of 1500.angs. was prepared by an e-beam evaporator onto a glass and a p-type InP wafer (100) LEC grown Zn-doped p=2.3*10$\^$16/cm$\^$-3/), in which the components of ITO used for evaporation source were hot pressed pellets 1 mole% ln$\_$2/O$\_$3/+9 mole% SnO$\_$2/, and evaporated in O$\_$2/ ambient. The optimum conditions to preparation of ITO thin film were the substrate temperature of 350.deg. C, the injected oxygen pressure of 2*10$\^$-4/ torr, and the evaporation speed of 0.2-0.3.angs./sec, respectively. In these optimum conditions, the resistivity and the carrier concentration were 5.3*10$\^$-3/ .ohm.-cm, 6.5*10$\^$20/cm$\^$-3/, and the transmittance was over 80%. From the results of J-V measurements in ITO/p-InP structure solar cells, the higher pressure of injected oxygen, the more open circuit voltage. The efficiency of ITO/p-InP solar cell without the grid line contact, prepared by the optimum evaporation conditions, was 7.19%. By using the grid line contact, the efficiency, the open circuit voltage, the short circuit current density, the fill factor, the series resistance, and the shunt resistance were 8.5%, 0.47V, 29.48 mAcm$\^$-2/ , 61.35%, 3.ohm., and 26.6k.ohm., respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.23-29
• /
• 2016

In this paper, in order to quantify the peristalsis occurrence in a guinea pig's large intestine, a miniaturized air-gap capacitive pressure sensor was fabricated through micro-electro-mechanical system (MEMS). The proposed pressure sensor is a two-layered biocompatible polyimide substrate consisting of an air-gap capacitive plates between the substrates. The proposed pressure sensor was designed with a careful consideration of the structure and motility mechanism of the guinea pig's large intestine. Artificial pellets were mounted on a prototype pressure sensor to provide some redundancies in the form of size and shape of the guinea pig feces. Capacitance of a prototype sensor was recorded to be 2.5 ~ 3 pF. This capacitance value was later converted to count value using a lab fabricated data conversion system. Sensitivity of the pressure sensor was recorded to be below 1 mmHg per atmospheric pressure. During in vivo testing, artificial peristalsis caused by drug injection was measured by inserting the prototype pressure sensor into the guinea pig's large intestine and pressure data obtained due to artificial peristalsis was graphed using a labview program. The proposed pressure sensor could measure the pressure changes in the proximal, medial, and distal parts of the large intestine. The results of the experiment confirmed that pressure changes of guinea pig's large intestine was proportional to the degree of drug injection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.2979-2984
• /
• 2015

This paper has presented a new foaming technology of selective hybrid-structured polymer film with expanded pores. The porous structure of closed pore was firstly fabricated by applying the 355nm UV-pulsed laser to 0.1mm thick film that was uniformly mixed with PP pellets, copper powder, and CBA (Chemical Blowing Agent). In order to expand pore size of closed-cell shape, LAMO(Laser Aided Micro pore Opening) processing was conducted to heat the copper powder, and then the bigger pore size of closed-cell more than existing pore size was successfully formed because of rapid conduction of heated metal powder. From the experimental results, various process parameters such as laser fluence, intensity, scan rate, spot size and density of powder and CBA were considerably considered to reveal the correlation among the pore characteristics. In the future, a function experiment will be carried out to use the hybrid film of industrial applications.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.6
• /
• pp.483-489
• /
• 2020

BaTiO₃ powder was synthesized by a solid-state reaction using BaCO₃ and TiO₂. Different calcination temperatures (800℃, 850℃, 900℃, and 950℃) were set to investigate their effects on the properties of BaTiO₃ powder. The synthesized BaTiO₃ phase was confirmed to be a single phase by XRD, and the tetragonality (c/a) and crystallite size were calculated. Thereafter, each calcinated BaTiO₃ was sintered at five different sintering temperatures (1,100℃, 1,150℃, 1,200℃, 1,250℃, and 1,300℃), and the tetragonality, density, porosity, dielectric constant, and grain size were measured. As the calcination temperature increased, the tetragonality and crystallite size also increased, to 1.008 and 66 nm, respectively, at 950℃. Moreover, most pellets showed increased density, dielectric constant, and tetragonality as the sintering temperature increased up to 1,250℃; the same parameters slightly decreased at 1,300℃. It is noteworthy that the tetragonality of BaTiO₃ at 1,250℃ exhibits a very high c/a value of 1.0084. In addition, the grain size and dielectric constant measured near the Curie temperature increased as the sintering temperature increased.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.113-119
• /
• 2013

To develop a new nuclear fuel, it needs to make a test fuel rod and carry out burn-up test in the test loop of a research reactor to check the irradiation characteristics of the nuclear fuel. At that time, several sensors such as thermocouples, LVDTs and SPNDs are needed to be attached in and out of the fuel rod and connect them with instrumentation cables. Then, the instrumentation cables deliver the signals measured by the sensors to the measuring device located outside of the reactor pool. In particular, to install a thermocouple in a fuel rod, it needs to drill off holes on the alumina blocks and sintered $UO_2$ pellets. However, because the hardness of a sintered $UO_2$ pellet is 700 Hv (or HRC 61) and that of an alumina block is 1480 Hv, a special drilling machine which adapts a diamond coated drill bit had developed. In this study, several case experiments have been carried out to find an optimal drilling condition of the drilling machine. And, using the optimal drilling condition, minimum numbers of the holes that a drill bit can drill off are verified.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.4
• /
• pp.180-187
• /
• 2005

Nine chemolithoautotrophic and 12 chemolithoheterotrophic sulfur oxidizing bacteria were isolated using enrichment technique in modified Starkey's medium. All isolates reduced pH of the growth medium through oxidation of elementai sulfur to sulfuric acid. Isolates utilized the thiosulfate as energy source except LCH. None of the isolates grew anaerobically and utilization of glucose was found only in chemolithoheterotrophic isolates SGA6 and JIG. In vitro sulfate production from elemental sulfur was found maximum for chemoiithoautotroph LCH ($43.2mg\;100\;mL^{-1}$) and least for chemolithoheterotroph JIG ($10.04mg\;100\;mL^{-1}$). The above tests suggested that all isolates belong to the member of Thiobacillus. For field inoculation of Thiobacillus, clay based pellet formulation was developed with the cell load of $2.5{\times}10^7cfu\;g^{-1}$ of pellet. It is easy to handle by the farmers and more likely to lead to successful farming.

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.661-666
• /
• 1998

Liquid phase adsorption equilibria of amines in an aqueous solution onto high silica zeolite pellets (HSZ), macroreticular resin particles (MR) and granular activated carbon (GAC) were determined using a batch bottle technique at 298K. The isotherm curves of HSZ-amines and GAC-amines indicate the nonlinear relationship of unfavorable adsorption type of HSZ-amines and favourable one of GAC-amines. However the curves of MR-amines represent the linear pattern of an adsorption isotherm. Among various equilibrium isotherms, the three parameters of the Redlich-Peterson equation and the two parameters of the Freundlich equation are found to be the most satisfactory within the range of this study. The two parameters of the Langmuir isotherm were not applicable to the present adsorption systems. The amines were adsorbed on the HSZ, MR and GAC in the following sequence of adsorptivity; aromatic amines > primary amines > secondary amines. The product of the Freundlich constants, k and n, proportionally increased with the boiling point, molar volume and dissociation constants of amines adsorbed on HSZ, MR and GAC.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.6
• /
• pp.2909-2916
• /
• 2016

Background: Canine malignant lymphoma is classified into B- or T-cell origin, as in the human case. Due to differences in prognosis, a suitable method needs to be developed for lineage identification. Aims: To determine the accuracy of immunophenotypic and molecular information between three methods: immunocytochemistry (ICC), immunohistochemistry (IHC) and heteroduplex polymerase chain reaction for antigen receptor rearrangements (hPARR) in spontaneous canine lymphomas. Materials and Methods: Peripheral blood, fine needle aspiration and tissue biopsies from enlarged peripheral lymph nodes prior to treatment of 28 multicentric lymphoma patients were collected. Cytopathology and histopathology were examined and classified using the updated Kiel and WHO classifications, respectively. Anti-Pax5 and anti-CD3 antibodies as B- and T-cell markers were applied for immunophenotyping by ICC and IHC. Neoplastic lymphocytes from lymph node and white blood cell pellets from peripheral blood were evaluated by hPARR. Results: In this study, low grade B-cell lymphoma accounted for 25% (7/28), high grade B-cell lymphoma for 64.3% (18/28) and high grade T-cell lymphoma for 10.7% (3/28). According to the WHO classification, 50% of all cases were classified as diffuse large B-cell lymphoma. In addition, ICC showed concordant results with IHC; all B-cell lymphomas showed Pax5+/CD3, and all T-cell lymphomas exhibited Pax5-/CD3+. In contrast to hPARR, 12 B-cell lymphomas featured the IgH gene; seven presented the $TCR{\gamma}$ gene; five cases showed both IgH and $TCR{\gamma}$ genes, and one case were indeterminate. Three T-cell lymphomas showed the $TCR{\gamma}$ gene. The percentage agreement between hPARR and ICC/IHC was 60%. Conclusions: Immunophenotyping should not rely on a single method. ICC or IHC with hPARR should be used concurrently for immunophenotypic diagnosis in canine lymphomas.

• The Journal of Traditional Korean Medicine
• /
• v.15 no.1
• /
• pp.70-76
• /
• 2006

The aim of this study was to investigate the effect of ethanol extract of Fagopyrum escuentum(FE) on the melanogenesis. To determine whether ethanol extract of FE suppress melanin synthesis in cellular level, B16F10 melanoma cells were cultured in the presence of different concentrations of FE ethanol extract. In the present study, the author examined the effects of FE ethanol extract on cell proliferation, melanin contents, tyrosinase activity. Cell proliferation was slightly increased by treatment with ethanol extract of FE (25-200 ${\mu}$g/ml). The ethanol extract of FE effectively suppressed melanin contents at a dose of 100 ${\mu}$g/ml. It was observed that the color of cell pellets was totally whitened compared with the control. The ethanol extract of FE inhibited tyrosinase activity, regulate melanin biosynthesis as the key enzyme in melanogenesis. These results suggest that the ethanol extract of FE exerts its depigmenting effects through the suppression of tyrosinase activity. And it may be a potent depigmetation agent in hyperpigmentation condition.

• Journal of the Korean Magnetics Society
• /
• v.18 no.4
• /
• pp.154-158
• /
• 2008

Magnetite($Fe_3O_4$) is currently one of key materials for applications in magnetic storage and many bioinspired applications because bulk $Fe_3O_4$ has a high Curie temperature($Tc={\sim}850K$) and nearly full spin polarization at room temperature(RT). In this work, $Fe_3O_4$ nanoparticles with different sizes of 12 to 15 nm were prepared in a well-controlled manner by a nonhydrolytic synthetic method. Here, we report the significant intergrain magneto-resistance(MR) of ${\sim}2%$ at RT in $Fe_3O_4$ nanoparticle pellets. The tunneling conductance was also investigated based on the Brinkman model, as well. Our results show clearly that the surface or interfacial property of the particles plays a crucial role in the MR effect.