• 한국가스학회지
• /
• 제5권4호
• /
• pp.27-32
• /
• 2001

온실효과의 주요 원인 물질인 이산화탄소를 고온$\cdot$고압에서 제거하기 위한 CaO 흡착제를 제조하였다. 흡착제는 석회석을 고압성형과 소성을 이용하여 제조하여 그 물성을 조사하고 회분식 흡착용기에서 흡착실험을 수행하였다. 세공면적은 성형압력으로 결정되며 세공분포는 이분산 형태를 갖는다. CaO의 $CO_2$ 흡착은 화학흡착이며 최대전환율은 $700^{\circ}C$에서 $80\%$에 근접한다.

• Journal of Microbiology and Biotechnology
• /
• 제10권4호
• /
• pp.482-487
• /
• 2000

Optimization of submerged culture conditions for the production of exo-biopolymer from Paecilomyces japonica ws studied. Maltose, yeast extract, and potassium phosphate were the most suitable sources of carbon, nitrogen, and inorganic salt, respectively, for both production of the exo-biopolymer and mycelial growth. The optimal culture conditions in a flask culture were pH 5.0, $25^{\circ}C$, and 150 rpm in a medium containing (as in g/l) 30 maltose, 6 yeast extruct, 2 polypeptone, $0.5{\;}K_3HPO_4,{\;}0.2{\;}KH_2PO_4,{\;}0.2{\;}MnSO_4{\cdot}5H_2O,{\;}0.2{\;}MgSO_4{\cdot}7H_2O$. Exo-biopolymer production and mycelial growth in the above suggested medium were significantly increased in a 2.5-1 jar fermentor, where the maximum biopolymer concentration was 8 g/l. The morphological changes of the mycelium in the submerged culture were observed within pH ranges from 4.0 to 9.0; i.e., growth of the filamentous form was optimal at culture pHs of 5.0 and 6.0, whereas pellet was formed at other pHs.

• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1104-1108
• /
• 2007

Conducting Polypyrrole-lead titanate (PPy/PbTiO3) composites have been prepared by in situ deposition technique by placing different wt.% of fine grade powder of PbTiO3 (10, 20, 30, 40, and 50%) during polymerization of pyrrole. The composites formed were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA), and these data indicate that PbTiO3 particles are dominating with an increase in crystallinity as well as thermal stability of the composites. The results on the low frequency dielectric studies which are obtained in the form of pressed pellet state are interpreted in terms of Maxwell Wagner polarization, which are responsible for the dielectric relaxation mechanism and frequency dependence of conductivity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.52-56
• /
• 2001

Experiments of 2 type on insulating compounds accomplished to change PVC using in URD(Underground) power cable jacketing. one was DB (Dielectric Breakdown) test on the pure base resins and the others were WVT(Water Vapor Transmission) test on the compounds which contained C/B(Carbon Black), anti-oxidant to base resin. a kind of specimens made by pressing to resin of pellet or lump form was HDPE(High Density Polyethylene), MDPE(Medium Density Polyehylene), LDPE(Low Density Polyethylene), LLDPE(Linear Low Density Polyethylene), PVC (Polyvinyl Chloride). As a results of AC DB and WVT test, we saw that strength of Insulation was HDPE > LLDPE ≒ MDPE > LDPE and WVT ratio was HDPE < LLDPE < MDPE < LLDPE ≒ LDPE${\ll}$PVC. WVT of PVC using for jacket showed characteristic 15 times more than MDPE or LLDPE. Therefore, to development of watertightness cable, our works present need of Changing in insulating materials

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.140-141
• /
• 2005

To measure elastic properties of semiconducting materials in power cable, we have investigated modulus of EVA/acetylene black composite showed by changing the content of acetylene black. The specimen was primarily kneaded in material samples of pellet form for 5 minutes on rollers ranging between 70[$^{\circ}C$] and 100[$^{\circ}C$]. Then this was produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[kg/cm]. The contents of conductive acetylene black were 20, 30 and 40[wt%], respectively. The modulus experiment was measured by DMA 2980. The ranges of measurement temperature were from -50[$^{\circ}C$] to 100[$^{\circ}C$] and measurement frequency is 1[Hz]. The modulus of specimens was increased according to an increment of acetylene black content. And modulus was rapidly decreased at the glass transition temperature. The tan$\delta$ of specimens was decreased according to an increment of acetylene black content.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.136-137
• /
• 2005

To measure elastic properties of semiconducting materials in power cable, we have investigated modulus of EBA/carbon black composite showed by changing the content of carbon black. The specimen was primarily kneaded in material samples of pellet form for 5 minutes on rollers ranging between 70[$^{\circ}C$] and 100[$^{\circ}C$]. Then this was produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[kg/cm]. The contents of conductive carbon black were 20, 30 and 40[wt%], respectively. The modulus experiment was measured by DMA 2980. The ranges of measurement temperature were from -50[$^{\circ}C$] to 100[$^{\circ}C$] and measurement frequency is 1 [Hz]. The modulus of specimens was increased according to an increment of carbon black content And modulus was rapidly decreased at the glass transition temperature. The tan$\delta$ of specimens was decreased according to an increment of carbon black content.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1893-1895
• /
• 2005

To measure electrical properties of semiconducting materials in power cable, we have investigated dielectric properties of EVA showed by changing the content of carbon black. The specimen was primarily kneaded in material samples of pellet form for 5 minutes on rollers ringing between $70[^{\circ}C]$ and $100[^{\circ}C]$. Then that was produced as sheets after pressing for 20 minutes at $180[^{\circ}C]$ with a pressure of 200[kg/cm]. The contents of conductive carbon black were 20, 30 and 40(wt%), respectively The dielectric properties of specimens were measured by dielectric thermal analyzer (CONCEPT 40, NOVOCONTROL). Measuring frequencies were 10, 60, 100, 1000, 10000, 100000, 1000000(Hz) and measuring temperatures were -40, -20, 20, $90[^{\circ}C]$. From above experimental result, permittivity was increased, while $tan{\delta}$ was decreased according to an increment of the content of carbon black.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.236-237
• /
• 2005

To measure surface roughness and smoothness of semiconducting materials in power cable, we have investigated the formation and growth process of carbon black showed by changing the content of carbon black. The specimens were primarily kneaded in material samples of pellet form for 5 minutes on rollers ranging between 70[$^{\circ}C$] and 100[$^{\circ}C$]. Then they were produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[kg/cm]. The contents of conductive carbon black were the variable, and their contents were 20, 30 and 40[wt%], respectively. The surface roughness and smoothness of specimens were measured by SEM and AFM. From SEM experimental result, carbon black in specimens formed matrix as a particles. Also we showed growth process of carbon black according to an increment of the content of carbon black. From AFM experimental result, surface roughness of specimens decreased according to an increment of the content of carbon black.

• Nuclear Engineering and Technology
• /
• 제49권6호
• /
• pp.1287-1300
• /
• 2017

Based on the observation that ignoring the angle dependency of multigroup resonance cross sections within a fuel pellet would result in nontrivial underestimation of the spatial self-shielding of flux, a parametrized spectral superhomogenization (SPH) factor library (PSSL) method is developed as a practical means of resolving the problem. Region-wise spectral SPH factors are calculated by the normal and transport corrected SPH iterations after ultrafine group slowing down calculations over various light water reactor pin-cell configurations. The parametrization is done with fuel temperature, U-238 number density, fuel radius, moderator source represented by ${\Sigma}_{mod}V_{mod}$, and the number density ratio of resonance nuclides to that of U-238 in a form of resonance interference correction factors. The parametrization is successful in that the root mean square errors of the interpolated SPH factors over the fuel regions of various pin-cells are within 0.1%. The improvement in reactivity error of the PSSL method is shown to be superior to that by the original SPH method in that the reactivity bias of -200 pcm to -300 pcm vanishes almost completely. It is demonstrated that the environment effect takes only about 4% in the reactivity improvement so that the pin-cell based PSSL method is effective in the assembly problems.

• Journal of Pharmaceutical Investigation
• /
• 제25권1호
• /
• pp.19-29
• /
• 1995

The study was carried out to develop useful formulation for omeprazole(OMP) through OMP-ethylendiamine complex(OMPED), and the pharmaceutical properties of formula were tested to find out the difference in vivo behaviors of formulations between the free and complexed OMP. Oral and suppository dosage forms were also formulated and the dissolution profiles and pharmacokinetic parameters were measured to observe the difference in bioavailability between the free and complex form, and the correlation between dissolution rate and bioavailability was evaluated. The results are summarized as follows; In the case of formulation for oral administration, the release of OMP from enteric OMPED pellets was found satisfactory to the requirement standard and no decomposition of OMP in the pellets was found in acidic solution. Therefore the enteric OMPED pellets are anticipated to be a stable formulation. The release of OMP from OMPED tablet with chitosan as excipient and coated with cellulose acetate phthalate was found to be significantly retarded. The results of bioavailability test for OMP and OMPED tablets with lactose-excipient showed that the AUC value of OMP tablet was $116.89\;{\mu}g\;{\cdot}\;min/ml$, that of OMPED tablet was $161.10\;{\mu}g\;{\cdot}\;min/ml$, respectively. The reason why was thought that OMP decomposes more readily in body than OMPED, and the AUC of the tablet with chitosan-excipient and coated with cellulose acetate phthalate was most enhanced. In the case of bioavailability for suppositories with OMP, $OMP-{\beta}\;-cyclodextrin$ complex and OMPED, the AUC of OMPED suppository was most increased. From the above results, it is thought that the more stable and bioavailable oral or rectal dosage forms could be developed by using the OMPED as a potential OMP complex.