• 한국식품조리과학회지
• /
• 제8권1호
• /
• pp.57-63
• /
• 1992

The purpose of this study was to investigate the rheological and thermal properties of yam starch. Yam starch had a hydrodynamic volume with the intrinsic viscosity,［$\eta$］, of 0.29dl/g deionized water. The values of the intrinsic viscosity of yam starch, determined to pH 2-11, varied between 0.07 to 0.18 dl/g. The highest intrinsic viscosity was obtained at pH 7. At salt concentrations 0-0.2 M NaCl, the intrinsic viscosity of yam starch was decreased up to 0.05 M NaCl concentration then increased to 0.07 M NaCl concentration and remained constant to reach 0.2 M NaCl concentration. The overlap parameter, calculated with the intrinsic vicosity data, was 3.45 g/dl in deionized water. The thermal properties of yam starch were investigated by Differential Scanning Calorimetry. Three endotherms were observed both pH solution and salt concentation. In the presence of pH 9, the onset temperature of gelatinization peak was the lowest temperature of 50.$32^{\circ}C$ and the enthalpy ($\Delta$H) was increased in this solution. The effect of salt on the thermal properties of yam starch was determined at salt concetration of 0-0.2 M NaCl. The enthalpy significantly decreased to salt concentration 0.07 M NaCl and the lowest onset temperature of this concentration was 52.$90^{\circ}C$.

• 한국식품영양학회지
• /
• 제12권3호
• /
• pp.252-257
• /
• 1999

In an attempt to evaluate the effects of calcium on paste or gelatinization properties by amylograph and mixing properties by farinograph of wheat flour and on viscosity property cooking quality textural and sensory properties of Ramyon were examined. The contents of calcium used were from 1.0% to 3.0% based on flour weight. The viscosity property of wheat flour with calcium was increased the initial past-ing temperature but the amylograph peak viscosity were decreased in vice versa. The farinograph absorp-tion stability and breakdown were increased by calcium. The shear extrusion force and hardness of Ram-yon manufactured with calcium were shown much higher value than those of control. At cooking quality examination of Ramyon manufactured with calcium weight of cooked Ramyon was increased by volume was decreased. Extraction amounts of Ramyon manufactured with calcium during cooking were much smaller than those of control. These changes will provided many advantages in the preparation of Ram-yon. The I2 reaction value of Ramyon manufactured with calcium and control were shown to almost same values. Sensory properties of cooked Ramyon which was manufactured with calcium showed quite acceptable. Based on the cooking and sensory evaluation test addition of 0.3% calcim to wheat flour may be suitable for processing Ramyon.

• 산업식품공학
• /
• 제23권2호
• /
• pp.125-133
• /
• 2019

마 분말과 생 마의 추출 용매(열수 25, 50, 75, 95℃, 에탄올 25, 50, 75 100%) 및 추출 방법(회분법, 침지법)에 따른 추출물과 추출 후 침전물에 대한 특성을 알아보았다. 추출물의 total polyphenol 대부분 생 마 보다는 마 분말에서 더 높게 나타났고 마 분말 50% 에탄올 추출에서 가장 높은 함량을 나타냈다. DPPH 라디칼 제거능은 마 분말과 생 마 모두 75% 에탄올 추출법에서 높은 제거능을 보였고, 가압 가열 추출법은 높은 압력과 온도에 의한 항상화 물질의 파괴로 인해 낮은 제거능을 보였다. 조사포닌 함량은 마 분말과 생 마 모두 95℃ 열수 추출법에서 가장 높은 함량을 나타냈다. 티로시네이즈 활성 억제능에서는 마 분말의 경우는 95℃ 열수 추출법 또는 가압 가열 추출법, 생 마의 경우에는 95℃ 열수 추출법, 25% 에탄올 추출법 또는 가압 가열 추출법으로 추출한 시료가 가장 티로시네이즈의 활성을 억제하는 것으로 나타났다. 침전물의 RVA 호화특성 결과 대부분 추출법에서 peak viscosity, trough, final viscosity 등이 control에 비해 증가하는 결과가 나온 반면 95℃ 열수 추출법과 가압 가열 추출법에서는 전분 그래뉼의 파괴를 SEM을 통하여 확인하였고 그로 인한 viscosity 감소 현상이 나타났다. 그러나 마 분말 75℃ 열수 추출의 경우 전분 그래뉼의 파괴는 SEM에서 관찰되지 않았음에도 viscosity가 감소한 것에 대한 추가 연구도 필요할 것으로 생각된다. 침전물 현탁액의 점도는 마 분말에서 5.82-9.12 cp, 생 마에서 13.88-19.10 cp로 생 마에서 더 높게 나타났으며 이는 생 마의 점액 물질에 의한 결과로 생각되었다. 본 연구를 통해 마의 추출물과 침전물의 특성을 확인함으로써 마를 활용한 소재화, 식품 및 피부미용 기능성식품 및 화장품 소재 개발을 위한 데이터 자료로써 활용될 수 있을 것이라 생각된다.

• 한국식품과학회지
• /
• 제31권4호
• /
• pp.994-998
• /
• 1999

자당-지방산 에스테르(Sucrose-fatty acid ester, SE)가 제빵특성에 미치는 영향을 분석하기 위하여 반죽특성, 호화특성, 제빵특성 및 노화방지 효과를 조사하였고, 다른 유화제와 혼합, 비교실험을 하였다. SE의 첨가에 의해 peak time과 peak height를 증가 시켜 반죽 탄성이 향상되었고. farinogram 특성은 SE 0.5, 1.0% 첨가에 의해 peak time과 mechanical tolerance index (MTI)는 증가하였고 stability는 감소하였다. 호화개시온도, 최고점도시 온도는 감소하였으며 peak viscosity는 증가하였다. 제방특성은 SE의 유화제로서의 작용에 의하여 빵의 비체적을 증가 시켰으며, 빵의 $5^{\circ}C$ 및 $25^{\circ}C$ 저장 중 경도는 무첨가구에 비해 완만한 증가양상을 나타내어 노화 지연효과가 뚜렷하였으며, 0.5% 첨가구의 제빵 및 노화 지연효과가 높게 나타났다 SE, SSL, ES-95의 단독 및 혼합하여 0.5% 수준으로 첨가하여 측정한 제빵특성은 모두 비체적을 증가시켰으며 그 중 SE (0.2%)+SSL(0.15%)+ES-95(0.15%) 혼합구의 비체적이 대조구 보다 매우 높게 나타났다. 위에서 제조한 빵의 $5^{\circ}C$ 및 $25^{\circ}C$ 저장 중 경도는 무첨가구에 비해 완만한 증가양상을 보여 노화지연효과가 뚜렷하였으며, 그 중 SE(0.25%)+SSL(0.25%)의 노화지연효과가 가장 좋게 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제28권10호
• /
• pp.1689-1696
• /
• 2007

Equilibrium molecular dynamics (EMD) simulations are used to evaluate the transport coefficients of argonkrypton mixtures at two liquid states (state A: 94.4 K and 1 atm; state B: 135 K and 39.5 atm) via modified Green-Kubo formulas. The composition dependency of the volume at state A obeys close to the linear model for ideal liquid mixture, while that at state B differs from the linear model probably due to the high pressure. The radial distribution functions for the Ar-Kr mixture (x = 2/3) show a mixing effect: the first peak of g11 is higher than that of g(r) for pure Ar and the first peak of g22 is lower than that of g(r) for pure Kr. An exponential model of engineering correlation for diffusion coefficient (D) and shear viscosity (η) is superior to the simple linear model for ideal liquid mixtures. All three components of thermal conductivity (λpm, λtm, and λti) at state A and hence the total thermal conductivity decrease with the increase of x. At state B, the change in λtm is dominant over those in λpm and λti, and hence the total thermal conductivity decrease with the increase of x.

• Preventive Nutrition and Food Science
• /
• 제10권3호
• /
• pp.207-213
• /
• 2005

Molecular structures and functional properties of starches isolated from normal, waxy, and zero amylose barleys were examined. Amylopectins from zero amylose starch had the largest molecular weight $(M_w)$, whereas those from high amylose starch, the smallest. A good correlation between the $(M_w)$ and the radius of gyration $(R_g)$ was observed among amylopectins from various starches, indicating similar polymeric conformation in solution even with the differences in the $(M_w)$. The debranched amylopectin molecules from different types of barley starches exhibited similar profiles, implying that the packing geometry of double helices in the different types of barley starches may be similar. Zero amylose starch showed the highest peak viscosity (326 RVU) in RV A viscograms at lower pasting temperature $(67.6^{\circ}C)$, compared to normal and high amylose starches. Relationship between RVA peak viscosity and amylose content suggested that the presence of amylose inhibited the development of granular swelling of barley starches during cooking. A rapid retrogradation, traced by differential scanning calorimetry (DSC) and strain-controlled rheometry, occurred in the high amylose starch sample during storage, while zero amylose starch showed a very good resistance to retrogradation, indicating excellent storage stability.

• 한국염색가공학회지
• /
• 제26권1호
• /
• pp.32-38
• /
• 2014

There has been increasing demand to the eco-friendly materials such as phytoncide which is extracted to plants in the textile industry, recently. It is interesting that alginic acid sodium salt(Alg-Na) is used to eco-friendly binder for the functional capsule finishing. In this study, we made PEO/Alg-Na blend solutions of various ratio and observed the changing binding property of the blend solutions according to PEO contents through FT-IR, DSC, contact angle, peel strength, etc. The viscosity of Alg-Na/PEO blend solutions increased with increase of contents and the viscosity quickly increased with increase of PEO content in Alg-Na 5% content, specially. It is shown that the hydrogen bond peak by blend of Alg-Na and PEO found through FT-IR analysis but the peak decreased in PEO above 60% content. And the peel strength was predominant in PEO 50% ratio.

• 동아시아식생활학회지
• /
• 제19권6호
• /
• pp.1025-1031
• /
• 2009

This study was conducted to investigate the effects of garlic powder on medium and cake flours using falling number and RVA tests, as well as alveograms and farinograms. The garlic powder was added to the medium and cake flour bases at 2 and 4%, respectively. Falling numbers increased with the addition of garlic powder. The peak viscosity of the medium flour containing 2% garlic powder was highest while that made with 4% garlic powder showed a decrease in peak viscosity. The addition of garlic powder increased the set-back value, thus the garlic powder did not have an anti-retrogradation effect. The alveographic P values of the treatment were lower than that of the control, but the L value was not significantly different. On the farinogram, water absorption was decreased in the flours containing garlic powder and development time was increased. In conclusion, the addition of 2% garlic powder is recommended to improve the volume and stability of cake.

• 한국식품영양과학회지
• /
• 제28권1호
• /
• pp.1-8
• /
• 1999

Starch was isolated from nine Korean sweet potato varieties(Shinmi, Seangmi, Yulmi, Shinyulmi, Sunmi, Jeungmi, Mokpo 26, Mokpo 29, and Mokpo 30) and analysed in its physicochemical properties in comparison with a commercial sweet potato starch(Kumokanyu) imported from China. Protein content in the isolated starch was highest(1.1%) in Mokpo 29 and lowest(0.3%) in Kumokanyu, whereas lipid content was equally less than 0.2%. Pasting analysis by Rapid Viscoanalyser(RVA) showed that Yulmi starch had the lowest pasting temperature(70.2oC) whereas Kumokanyu did the highest one (74.3oC). Under a differential scanning calorimetry(DSC), however, Kumokanyu showed the lowest onset temperature(61.8oC) and enthalpy(42.0 J/g) for crystal melting. Shinyulmi showed the highest peak viscosity of the starch paste, but shear thinning was significant like commercial potato starch. Kumokanyu, however, displayed the least peak visicosity but good shear stability. With the starch gels prepared at 4oC, Mokpo 29 showed the highest hardness, whereas Shinyulmi did the lowest one. Against repeated freeze thawing treatments, the starch gel of Kumokanyu was most stable, and among the Korean varieties, Yulmi, Shinyulmi, Jeungmi and Mokpo 26 had good stability. According to the chain distribution analysis, Shinyulmi and Mokpo 29 consisted of larger quanitites of shorter amylopectin chains than Kumokanyu, potato and corn starches.

• Food Science and Biotechnology
• /
• 제17권4호
• /
• pp.814-818
• /
• 2008

Com and rice starches were physically modified by planetary mill. While native starches showed high peak viscosities (1,001 and 563 cp), it decreased largely (42 and 20 cp for rice and com starch, respectively) after 2 hr of physical modification. When two starches were co-ground, peak viscosities decreased more largely than single ground one only in 30 min, indicating the pasting properties could be easily changed by co-grinding. Especially, the higher the amount of com starch, the viscosity decreased more largely, which means that paste stability could be controlled also by changing the ratio of com and rice starch. Mean particle size increased with physical modification time since particles became spread because of shear force. There were also changes in surface morphology after physical modification. Fluid property, such as mean time to avalanche (MTA), was improved (from $6.16{\pm}0.47$ and $8.37{\pm}1.23\;sec$ to $5.47{\pm}0.78$ and $5.26{\pm}1.37\;sec$ for rice and com starch, respectively) by physical modification. Pasting property, such as swelling power, was also improved by physical modification. These mean that native starches can be applied to both conventional powder and new paste-food industry more efficiently by physical modification.