• 한국운동역학회지
• /
• 제17권1호
• /
• pp.61-68
• /
• 2007

The purpose of this study was to analyze the shoulder joint torque and muscle pattern performing as Tennis serve by Isokinetic motions on Isomed 2000. The subject, who was 5 males Korean national high school tennis players. By analyzing the flexion/extension of the shoulder, the peak torque of the internal/external rotation motion(at 60,180 and 300 degree/sec) at peak torque degree, the weight, peak torque, and power. combined with the timing of the electrode of the attached trapezius and posterior deltoid at the three part. From the data analysis & discussion the following conclusions were drawn. When doing a shoulder extension, the peak torque can be widely seen at 60degree per second. However the degree may be different depending on angular velocity. When doing an internal rotation at 90degree abduction, peak torque per weight was seen at 60degree per second. The degree of peak torque was at 31.6-44.2 and peak power was faster when angular velocity was increased. The aspect of muscle pattern was seen more at the internal rotation in the 90degree abduction rather than the shoulder extension. However the angular velocity was not influenced by muscle mobilization(in order of anterior deltoid, posterior deltoid and trapezius. To properly apply the above conclusion, when tennis players serve it is better the elbow be impacted by the extension. when doing isokinetic motion it is better to increase angular velocity and improve muscle power. also the anterior deltoid amongst the shoulder muscle should be improved to develop serve speed.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4327-4331
• /
• 2011

A new method in thermal ionization mass spectrometry (TIMS) was developed to correct peak tailing backgrounds in the isotope ratio measurements of uranium in ultra trace levels for higher accuracy. Two different uranium standard reference materials (U005 and U030) were used to construct databases of signal intensities at mass 234 u and mass 236 u, which correspond to the two uranium minor isotopes, and signal intensity of $^{238}U$. Correlations between peak tailing backgrounds and $^{238}U$ were obtained by least-squares regression on calculated backgrounds at mass 234 u and mass 236 u with respect to the signal intensity of $^{238}U$ followed by separation of the peak tails of the two major isotopes of uranium ($^{235}U$ and $^{238}U$), which enables us to obtain a master equation for peak tailing background correction on all kinds of samples. Verification of the correction method was carried out using U010 and IRMM-040a.

• 전기학회논문지
• /
• 제66권8호
• /
• pp.1172-1180
• /
• 2017

This study analyzed competition in peak load plants between CCGT and GT instead of competition between base and peak load plants like in previous studies. In common overseas power markets, CCGT and GT claim certain market shares as peak load plants with the latter boasting a high utilization rate as reserve plants. In South Korea, however, there has been no introduction of GT in the market that opened in 2001 with no analysis cases of GT's economy as a peak load plant. The current power market of South Korea is run on the cost-based pool, which allows for no price spikes. Since the capacity payment criteria for compensations for missing money are set based on GT generators, the power market uses GT generators as marginal plants. The purposes of this study were to analyze the competitive edge of GT generators as peak load plants in the domestic power market of South Korea and identify the causes of GT's failure in market entry, thus assessing the adequacy of market signals in the domestic power market.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.86-93
• /
• 2009

Elastomeric O-rings have been the most common seals due to their excellent sealing capacity, and availability in costs and sizes. One of the critical applications of O-ring seals is solid rocket motor joint seal where the operating hot gas must be sealed during the combustion. This has long been a design issue to avoid the system failure. For laterally constrained, squeezed and pressurized condition, deformed shape of O-ring was measured by computed tomography method and CCD laser sensor, compared with numerical calculations. As clearance gap changes, sealing performance had been evaluated on peak contact stresses at top, bottom and side contact surfaces. As clearance gap increases, peak contact stresses and contact widths in top and side contact surfaces increase, and the asymmetry of stress distributions is promoted due to pressure increase. It is suggested that peak stress of bottom contact surface can be approximated by simple superposition of peak ones due to squeeze and pressure. Under pressurized condition, sealing performance is dependent on not peak stresses of bottom and side contact surfaces but that of top.

• 전기학회논문지
• /
• 제62권7호
• /
• pp.1020-1026
• /
• 2013

Multirate filtering process on the biological signals like Electrocardiogram (ECG) and Photoplethysmogram (PPG) can be defined as the digital signal processing algorithm in which the sampling rate varies to omit or interpolate the intermediate values between the sampled data. With this aim, we suggest a new multirate filtering algorithm by deleting the extraneous data to eliminate the unwanted degradations such as granular noise due to the usage of high sampling frequency and simultaneously to detect the fiducial features of ECG and PPG with reducing the complexity of resolving fiducial points such as R-peak, Pulse peak and Pulse Transit Time (PTT). After the experimental simulations performed, we can conclude the fact that we can detect the fiducial features of ECG and PPG signal in terms of R-peak, Pulse peak and PTT without the loss of accuracy even if we do not maintain the original sampling frequency.

• 한국식품과학회지
• /
• 제26권5호
• /
• pp.561-566
• /
• 1994

고추장의 유기산 함량, 향기성분의 GC peak area 및 관능검사에 의한 향미강도 측정결과를 통계적으로 분석하여 고추장을 분류하였다. 공시된 고추장은 재래식 51종과 시판 공장산 고추장 10종으로서 재래식 고추장은 순창지역의 찹쌀고추장 20종, 보은지역의 11종의 보리 고추장, 사천 지역의 밀 고추장 20종이었다. 유기산에 대한 정준판별분석을 실시한 결과, 보은 고추장은 다른 종류의 고추장과 쉽게 구분되었고, lactic acid는 고추장의 종류를 판별하는데 기여도가 높은 변수였다. GC peak area에 대한 판별분석법을 수행한 결과 재래식과 공장산 고추장을 4개군으로 분류할 수 있었고 이때 단계적판별 분석법에 의하여 기여도가 높은 변수는 2, 4, 8 및 11번 peak로 나타났다. 8종의 관능적 특성의 강도에 대한 관능검사 결과를 이용하여 정준판별분석을 실시한 바, 공장산 고추장은 재래식 고추장과 구분되어 질 수 있는데 이때 구수한 맛의 강도가 가장 영향력이 있는 변수로 분석되었다.

• 대한원격탐사학회지
• /
• 제20권2호
• /
• pp.91-102
• /
• 2004

본 연구는 지형학적 순간단위유량도 작성을 위한 EOC 영상의 적용가능성에 대한 연구이다. EOC 영상으로부터 생성된 소유역에 대한 수치표고모형을 생성하여 유역밀도와 도수분포를 해석한 후 지형학적 순간단위유량도에 미치는 영향을 분석하여 EOC 영상의 지형수문학적 적용가능성을 검토하였다. 원격탐사기법을 이용한 유역특성 분석은 다른 방식에 비해 연구과정이 상당히 복잡하고 많은 시간이 걸리기 때문에 지형학적 수문해석의 기본 자료인 EOC 스테레오 영상으로 수치표고모형을 생성시켰다. 그리고 영상자료와 수치지도로부터 소하천 유역의 격자간격을 10m에서 100m까지 10m 간격으로 나눈 뒤 격자별로 하천에 대한 기본적인 분석을 실시한 후, 도수함수를 이용한 유역 면적와 하천길이의 통계분석을 실시하였다. 통계분석 후 지형학적 분기율, 면적비, 길이비에 대한 격자별 비교 분석 후 지형학적 순간단위유량도에 의한 첨두유량, 첨두도달시간을 비교 검토 하였다. 지형학적 순간단위도의 첨두유량과 도달시간은 유역인자 뿐만 아니라 격자 크기에 따라 비선형적으로 변화하는데 격자크기는 첨두도달시간과 유량의 중요한 지형수문학적 인자 중의 하나임을 알 수가 있으며, 유출해석을 위한 EOC영상의 활용이 가능할 것이다.

• 한국항만학회지
• /
• 제14권1호
• /
• pp.66-75
• /
• 2000

From the traffic analysis, and model constructions and verifications for speed prediction on the freeway ramp junctions with 70mph speed limit, the following results were obtained : ⅰ) The traffic flow distribution showed a big difference depending on the time periods. Especially, more traffic flows were concentrated on the freeway junctions in the morning peak period when compared with the afternoon peak period. ⅱ) The occupancy distribution was also shown to be varied by a big difference depending on the time periods. Especially, the occupancy in the morning peak period showed over 100% increase when compared with the 24hours average occupancy, and the occupancy in the afternoon peak period over 25% increase when compared with the same occupancy. ⅲ) The speed distribution was not shown to have a big difference depending on the time periods. Especially, the speed in the morning peak period showed 10mph decrease when compared with the 24hours'average speed, but the speed did not show a big difference in the afternoon peak period. ⅳ) The analyses of variance showed a high explanatory power between the speed predictive models(SPM) constructed and the variables used, especially the upstream speed. ⅴ) The analysis of correlation for verifying the speed predictive models(SPM) constructed on the ramp junctions were shown to have a high correlation between observed data and predicted data. Especially, the correlation coefficients showed over 0.95 excluding the unstable condition on the diverge section. ⅵ) Speed predictive models constructed were shown to have the better results than the HCM models, even if the speed limits on the freeway were different between the HCM models and speed predictive models constructed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.135-135
• /
• 1999

It is well known that Raman spectroscopy is powerful tool in analysis of sp3/sp3 bonding fraction in diamond-like carbon(DLC) films. Raman spectra of DLC film is composed of D-peak centered at 1350cm-1 and G-peak centered at 1530cm-1. The sp3/sp3 fraction is qualitatively acquired by deconvolution method. However, in case of DLC film, it is generally observed that G-peak position shifts toward low wavenumber as th sp3 fraction increases. However, opposite results were frequently observed in ta-C films. ta-C film has much higher residual compressive stress due to its high sp3 fraction compared to the DLC films deposited by CVD method. Effect of residual stress on G-peak position is most recommendable parameter in Raman analysis of ta-C, due to its smallest fitting error among many parameters acquired by peak deconvolution of symmetric spectra. In current study, the effect of residual stress on Raman spectra was quantitatively evaluated by free-hang method. ta-C films of different residual stress were deposited on Si-wafer by modifying DC-bias voltage during deposition. The variation of the G-peak position along the etching depth were observed in the free-hangs of 20~30${\mu}{\textrm}{m}$ etching depth. Mathematical result based on Airy stress function, was compared with experimental results. The more reliable analysis excluding stress-induced shift was possible by elimination of the Raman shift due to residual compressiove stress.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권1호
• /
• pp.64-70
• /
• 2016

Purpose: The purpose of this study was to evaluate performance reliability of stroke patients using kinematic analysis. Methods: A protocol to evaluate performance reliability was performed for three tasks on 20 stroke patients and 10 normal people. The tasks include hand to head (HH) task, hand to mouth (HM) task, and hand to target (HT) task. Results: The affected arms showed smaller joint angle, slower peak velocity, longer time to peak velocity for task performances than control group. Also, slower peak velocity and longer movement time for task performance in unaffected arm of stroke patients were obtained compared with the control group. Conclusion: Kinematic analysis is very useful quantitative tool to provide understanding on upper extremity function of stroke patients.