• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.404-407
• /
• 1995

Magnetic properties of model exchange-spring magnets, which are composed of magnetically soft and hard grains, were calculated by means of computer simulation. The dependence of the magnetic properties on the strength of intergrain exchange interaction and the amount of soft grains was studied. The existence of soft grains enhanced the remanence remarkably, and the remanence over $0.8M_{s}$ was obtained in the model magnets containing 25% or more soft grains by volume. The calculated coercivity vs. the strength of the exchange interaction curves showed a peak at a critical strength of the exchange interaction, although the remanence increased monotonously with increase in the strength of the exchange interaction. Thus the maximum energy product also reached a peak around the same critical strength. The calculated maximum energy product exceeded $300kJ/m^{3}$ when the magnet is assumed to be composed of $Fe_{3}B$ and $Nd_{2}Fe_{14}B$.

• Journal of Korean Physical Therapy Science
• /
• v.18 no.3
• /
• pp.9-16
• /
• 2011

Background : Smoking reduces the ability of the lungs to function. In particular, smoking reduces the vital capacity of the lungs, which is the amount of air the lungs can take in. This reduction in vital capacity has several important health effects. Purpose : The purpose of this study, therefore was to examine the effects of the respiratory muscle exercise on peak expiratory flow and respiratory muscle strength. Methods : For an experimental research design, it was employed 20 young healthy subjects and these subjects were assigned into two groups; a smoking group(n=10) and an non-smoking group(n=10). All groups were participated in respiratory muscle exercises twice a week for 5 weeks in same condition. For comparison between before and after for post treatment, it was analysed as paired t-test and ANCOVA. Results : The result of this study were as follows; In the case of smoking group, there were significant differences, from $427.77{\pm}76.61$ l/min to $526.66{\pm}58.52$ l/min of peak respiratory flow, from $94.33{\pm}22.07$ kg to $102.16{\pm}21.60$ kg of abdominal muscle strength between the before and the after of respiratory muscle strength exercises. In the case of nonsmoking group, there were significant differences, from $449.54{\pm}77.47$ l/min to $553.18{\pm}61.32$ l/min of peak respiratory flow, from $93.41{\pm}19.21$ kg to $101.58{\pm}18.92$ kg of abdominal muscle strength between the before and the after of respiratory muscle strength exercises. Conclusion : These results were suggested that the peak respiratory flow and muscle strength were improved after respiratory muscle strength exercises.

• The Journal of Korean Physical Therapy
• /
• v.31 no.6
• /
• pp.339-345
• /
• 2019

Purpose: The purpose of this study was to identify changes in knee muscle strength after reconstruction of the anterior cruciate ligament (ACL) and the posterior cruciate ligament (PCL). Methods: Thirteen subjects (males) with anterior ligament injury and ten subjects (males) with posterior ligament injury voluntarily participated in this study. Both groups were evaluated at the pre-and post-reconstruction stages using an isokinetic dynamometer. Peak torque, total work, and the hamstrings to quadriceps (H/Q) peak torque ratio were calculated at angular velocities of 60°/sec and 180°/sec. Statistical analysis was conducted on SPSS 18.0 for Windows using t-tests to compare mean differences. Results: At an angular velocity of 60°/sec, both the ACL and PCL groups showed a significant increase in muscle strength in the flexors and extensors. Muscle strength in the extensors was significantly increased in the PCL group compared to the ACL group. At an angular velocity of 180°/sec, the ACL group showed a significant increase in muscle endurance in the flexors and extensors, and the PCL group showed a significant increase in muscle endurance in the flexors. At angular velocities of 60°/sec and 180°/sec, the H/Q peak torque ratio increased in the ACL group but decreased in the PCL group. Consequently, the H/Q peak torque ratio was significantly different for the two groups. Conclusion: The results suggest that the patients with ACL injury should focus on strengthening the knee extensors and that the patients with PCL injury need to strengthen the knee flexors.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.3
• /
• pp.91-98
• /
• 2008

Objectives : The purpose of this study is to evaluate flexor-extensor muscle strength of trunk according to Sasang constitution. Methods : This study was carried out with the data from comprehensive medical testing. People were performed Trunk Extension Flexion(TEF) Program of CYBEX NORM System and QSCC(Questionnaire of Sasang Constitution Classification) II test. And then we made three groups according to Sasang constitution and analyzed isokinetic strength on the TEF. Results : 1. A significant difference(Taeumin>Soeumin>Soyangin) was found in flexor muscle peak torque(PT) of trunk according to Sasang constitution(P<0.05). 2. A significant difference was not found in flexor muscle peak torque%body weight (PT%BW) of trunk according to Sasang constitution. 3. A significant difference(Taeumin>Soeumin>Soyangin) was found in extensor muscle peak torque(PT) of trunk according to Sasang constitution(P<0.05). 4. A significant difference(Soeumin>Taeumin>Soyangin) was found in extensor muscle peak torque%body weight(PT%BW) of trunk according to Sasang constitution(P<0.05). Conclusions : There is a significant difference in isokinetic strength on the TEF according to Sasang constitution.

• Geomechanics and Engineering
• /
• v.16 no.6
• /
• pp.627-634
• /
• 2018

Soil stabilization is an essential engineering process to enhance the geotechnical properties of soils that are not suitable for construction purposes. This study focuses on using coconut coir, a natural fibre to enhance the soil properties. Lime, an activator is added to the reinforced soil to augment its shear strength and durability. An experimental investigation was conducted to demonstrate the effect of coconut coir fibers and lime on the consistency limits, compaction characteristics, unconfined compressive strength, stress-strain behaviour, subgrade strength and durability of the treated soil. The results of the study illustrate that lime stabilization and coir reinforcement improves the unconfined compressive strength, post peak failure strength, controls crack propagation and boosts the tensile strength of the soil. Coir reinforcement provides addition contact surface, improving the soil-fibre interaction and increasing the interlocking between fibre and soil and thereby improve strength. Optimum performance of soil is observed at 1.25% coir fibre inclusion. Coir being a natural product is prone to degradation and to increase the durability of the coir reinforced soil, lime is used. Lime stabilization favourably amends the geotechnical properties of the coir fibre reinforced soil.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.2
• /
• pp.112-119
• /
• 1991

Some experiments were carried out to investigate the effects of freezing and thawing on the strength and strain characteristics of alluvial silty clay under the different temperatures, loading and moisture conditions. The results were as follows; 1. The soil used was proved to be consisted of silty clay with honey-combed structure, and showed higher dilatancy, frost activity and lower stability in natural state. 2. Soil treated with freezing and thawing cycles showed lower compressive strength compared with the non treated, The strength decreased with incement of freezing and thawing cycles. It's shapes of stress-strain curves were flat and did not formulate a peak while the peak strength of higher moisture content soil decreased with the increment of moisture content. It's decrement ratio was most distinctly shown at the first one cycle of freezing and thawing. 3. The cohesion decreased due to freezing and thawing cycles but internal frcition angle was not changed. 4. The liquid limit decreased with increment of freezing and thawing cycles, and became almost constant after three cycles of freezing and thawing. 5. The strength under simple loading at failure mode was appeared to be higher compared with the cyclic loading after freezing and thawing but initial moisture content effect was not observed. 6. Ice lense was not observed within 50% of ice content ratio but observed over 100%. The higher the ice content ratio, the higher the peak strength. As a matter of fact, it seems that an optimum ice content ratio exists for plastic mode and the least compressive strength.

• Steel and Composite Structures
• /
• v.38 no.5
• /
• pp.563-582
• /
• 2021

The present study experimentally and analytically investigated the push-out behaviour of H-shaped steel section embedded in ultrahigh-performance fibre-reinforced concrete (UHPFRC). The effect of significant parameters such as the concrete types, fibre content, embedded steel length, transverse reinforcement ratio and concrete cover on the bond stress, development of bond stress along the embedded length and failure mechanism has been reported. The test results show that the bond slip behaviour of steel-UHPFRC is different from the bond slip behaviour of steel-normal concrete and steel-high strength concrete. The bond-slip curves of steel-normal concrete and steel-high strength concrete exhibit brittle behaviour, and the bond strength decreases rapidly after reaching the peak load, with a residual bond strength of approximately one-half of the peak bond strength. The bond-slip curves of steel-UHPFRC show an obvious ductility, which exhibits a unique displacement pseudoplastic effect. The residual bond strength can still reach from 80% to 90% of the peak bond strength. Compared to steel-normal concrete, the transverse confinement of stirrups has a limited effect on the bond strength in the steel-UHPFRC substrate, but a higher stirrup ratio can improve cracking resistance. The experimental campaign quantifies the local bond stress development and finds that the strain distribution in steel follows an exponential rule along the steel embedded length. Based on the theory of mean bond and local bond stress, the present study proposes empirical approaches to predict the ultimate and residual bond resistance with satisfactory precision. The research findings serve to explain the interface bond mechanism between UHPFRC and steel, which is significant for the design of steel-UHPFRC composite structures and verify the feasibility of eliminating longitudinal rebars and stirrups by using UHPFRC in composite columns.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.6
• /
• pp.37-44
• /
• 2008

At low normal stress levels, tensile strength of sand characteristically varies with either saturation or suction of soil in an up-and-down manner with a peak tensile strength that can occur at any degree of saturation. A theory that accurately predicts tensile strength of wet sand was presented in the previous study. In this study, the results of uniaxial tensile, suction-saturation and direct shear tests obtained from three sands (Esperance sand from Seattle, Washington, clean sand from Perth, Australia, and Ottawa sand) are used to validate the proposed theory. The closed form expression of the proposed theory can predict well the experimental data obtained from these sands in terms of the variation patterns of tensile strength over the entire saturation regimes, the magnitude of the tensile strength, its peak value, and the corresponding degree of saturation when the peak strength occurs.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.1
• /
• pp.81-88
• /
• 2006

Present study is to know the relation with throwing speed according to the uniform torque by the shoulder joint, over 20 persons of professional baseball, and were measured the uniform torque by the shoulder joint accordance with throwing speed between (A-low speed) and (B-high speed) of each group. In the present study, three components were measured, and analyzed with having an approximated output value appearing by changing angular velocity, and in $30^{\circ}/sec$, the maximum strength of muscles was measured, and in$210^{\circ}/sec$, the points of endurance strength of muscles were measured and analyzed, and the following result could be obtained. 1. In muscles strength (peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that group B has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 2 In the view of muscles strength (peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that group B has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 3. In the view of muscles strength(peak torque)of inner rotation, and outer rotation for respect to each speed of shoulder joint, though there did not appear outstanding difference between A group and B group in the $30^{\circ}/sec$, it showed that B group has priority in a little. Also in outer rotation by shoulder joint, though there appeared the same difference between A group and B group, B group is tended to be prior to A group in a little. 4. In the view of peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. 5. In the concern of the peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group in $30^{\circ}/sec$. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. 6. In the concern of the peak torque for respect to the weight accordance with each velocity of shoulder joint, there did not appear outstanding difference between A group and B group in $210^{\circ}/sec$. In outer rotation by the shoulder joint, there was not appeared clear difference between A group and B group. As conclusion, there did not appear a correlation of uniform torque by shoulder joint versus the speed throwing by a pitcher of professional base ball.

• The Journal of Korean Physical Therapy
• /
• v.11 no.1
• /
• pp.111-119
• /
• 1999

The object of study who healthufl thirty persons have been enforced Isokinetic exercise of non-dominant muscular strength. The next same that each dominant muscular strength and non-dominant strength, peak torque and total work have been comparative analysis 1, Shoulder muscles comparion increase peak torque at low speed from pretraining Isokinetic exercise of non-dominant strength side to ten week of post-training.. Flexor and extensor come out high and statistically significant 6, 8, 10 week than pretraining. Adductor and abductor come out high and statistically significant 4, 6, 8. 10 week then pre-training, Internal rotator and external rotator come out statistically significant 2, 4, 6, 8, 10 week then pre-ttraining. 2. Shoulder muscles comparion increase peak torque at high speed from pre-training Isokinetic execise of non-dominant strenght side to ten week of post-training. Flexor and extensor come out high and statistically significant 4, 6, 8, 10 week then pie-training. Adductor and abductor come out high and statistically significant 2, 4, 6, 8, 10 week than pre-training. Futernal rotator and external rotator come out statistically significant 4. 6, 8, 10 week than pre-training.