• 한국전문물리치료학회지
• /
• 제12권3호
• /
• pp.56-66
• /
• 2005

The purposes of this study were to test that complex motor training enhance motor function significantly, to test change in cerebellum, and to test the synaptic plasticity into the immunohistochemistry response of synaptophysin. Using an animal model of fetal alcohol syndrome - which equates peak blood alcohol concentrations across developmental period - the effects of alcohol on body weight during periods were examined. The effect of complex motor training on motor function and synaptic plasticity of rat exposed alcohol on postnatal days 4 through 10 were studied. Newborn rats were assigned to one of two groups: (1) normal group (NG), via artificial rearing to milk formula and (2) alcohol groups (AG), via 4.5 g/kg/day of ethanol in a milk solution. After completion of the treatments, the pups were fostered back to lactating dams, where they were raised in standard cages (two-and three animals per cage) until they were postnatal 48 days. Rats from alcohol group of postnatal treatment then spent 10 days in one of two groups: Alcohol-experimental group was had got complex motor training (learning traverse a set of 6 elevated obstacles) for 4 weeks. The alcohol-control group was not trained. Before consider replacing with "the experiment/study", (avoid using "got" in writing) the rats were examined during four behavioral tests and their body weights were measured, then their coronal sections were processed in rabbit polyclonal antibody synaptophysin. The synaptophysin expression in the cerebellar cortex was investigated using a light microscope. The results of this study were as follows: 1. The alcohol groups contained significantly higher alcohol concentrations than the normal group. 2. The alcohol groups had significantly lower body weights than the normal group. 3. In alcohol groups performed significantly lower than the normal group on the motor behavioral test. 4. In alcohol-control group showed significantly decreased immunohistochemistric response of the synaptophysin in the cerebellar cortex compared to the nomal group. These results suggest that improved motor function induced by complex motor training after postnatal exposure is associated with dynamically altered expression of synaptophysin in cerebellar cortex and that is related with synaptic plasticity. Also, these data can potentially serve as a model for therapeutic intervention.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.185-189
• /
• 2012

We report plasma-assisted molecular beam epitaxy of $In_XGa_{1-X}N$ films on c-plane sapphire substrates. Prior to the growth of $In_XGa_{1-X}N$ films, GaN film was grown on the nitride c-plane sapphire substrate by two-dimensional (2D) growth mode. For the growth of GaN, Ga flux of $3.7{\times}10^{-8}$ torr as a beam equivalent pressure (BEP) and a plasma power of 150 W with a nitrogen flow rate of 0.76 sccm were fixed. The growth of 2D GaN growth was confirmed by $in-situ$ reflection high-energy electron diffraction (RHEED) by observing a streaky RHEED pattern with a strong specular spot. InN films showed lower growth rates even with the same growth conditions (same growth temperature, same plasma condition, and same BEP value of III element) than those of GaN films. It was observed that the growth rate of GaN is 1.7 times higher than that of InN, which is probably caused by the higher vapor pressure of In. For the growth of $In_xGa_{1-x}N$ films with different In compositions, total III-element flux (Ga plus In BEPs) was set to $3.7{\times}10^{-8}$ torr, which was the BEP value for the 2D growth of GaN. The In compositions of the $In_xGa_{1-x}N$ films were determined to be 28, 41, 45, and 53% based on the peak position of (0002) reflection in x-ray ${\theta}-2{\theta}$ measurements. The growth of $In_xGa_{1-x}N$ films did not show a streaky RHEED pattern but showed spotty patterns with weak streaky lines. This means that the net sticking coefficients of In and Ga, considered based on the growth rates of GaN and InN, are not the only factor governing the growth mode; another factor such as migration velocity should be considered. The sample with an In composition of 41% showed the lowest full width at half maximum value of 0.20 degree from the x-ray (0002) omega rocking curve measurements and the lowest root mean square roughness value of 0.71 nm.

• 한국지진공학회논문집
• /
• 제24권6호
• /
• pp.253-266
• /
• 2020

The extended slip-weakening model was investigated by using a compiled set of source-spectrum-related parameters, i.e. seismic moment M_o, S-wave velocity V_s, corner-frequency f_c, and source-controlled high-cut frequency fmax, for 113 shallow crustal earthquakes (focal depth less than 25 km, M_W 3.0~7.5) that occurred in Japan from 1987 to 2016. The investigation was focused on the characteristics of stress drop, radiation energy-to-seismic moment ratio, radiation efficiency, and fracture energy release rate, G_c. The scaling relationships of those source parameters were also investigated and compared with those in previous studies, which were based on generally used singular models with the dimensionless numbers corresponding to f_c given by Brune and Madariaga. The results showed that the stress drop from the singular model with Madariaga's dimensionless number was equivalent to the breakdown stress drop, as well as Brune's effective stress, rather than to static stress drop as has been usually assumed. The scale dependence of stress drop showed a different tendency in accordance with the size category of the earthquakes, which may be divided into small-moderate earthquakes and moderate-large earthquakes by comparing to M_o = 10¹⁷~10¹⁸ Nm. The scale dependence was quite similar to that shown by Kanamori and Rivera. The scale dependence was not because of a poor dynamic range of recorded signals or missing data as asserted by Ide and Beroza, but rather it was because of the scale dependent V_r-induced local similarity of spectrum as shown in a previous study by the authors. The energy release rate G_c with respect to breakdown distance D_c from the extended slip-weakening model coincided with that given by Ellsworth and Beroza in a study on the rupture nucleation phase; and the empirical relationship given by Abercrombie and Rice can represent the results from the extended slip-weakening model, the results from laboratory stick-slip experiments by Ohnaka, and the results given by Ellsworth and Beroza simultaneously. Also the energy flux into the breakdown zone was well correlated with the breakdown stress drop, ${\tilde{e}}$ and peak slip velocity of the fault faces. Consequently, the investigation results indicate the appropriateness of the extended slip-weakening model.

• 한국식품영양학회지
• /
• 제28권3호
• /
• pp.428-435
• /
• 2015

본 연구는 국내 재배면적이 확대되고 있는 목이버섯의 부가가치 향상과 소비량 확대를 위해 팽화기술을 접목한 목이버섯 즉석죽을 제조하고, 품질특성을 조사하여 실버층에 쉽게 적용할 수 있는 제품을 개발하고자 하였다. 백미와 흑미를 75~100%와 25~0%로 혼합한 후 비타민 $D_2$와 식이섬유 함량이 높은 건목이버섯을 0~4%로 첨가하여 호화도, 영양성분, 항산화성 및 관능 등을 조사하였다. 즉석죽 분말의 호화도는 건목이버섯 첨가량이 증가할수록, 흑미 첨가량이 감소할수록 최고점도와 유지강도, 강하점도, 최종점도, 노화점도가 증가하는 경향이었다. 백미 80%와 흑미 20%를 혼합한 후 건목이 버섯 3%를 첨가한 즉석죽은 비타민 $D_2$ $18.53{\mu}g/100g$, 식이섬유 3.73 g/100 g이 함유되어 있어 뼈의 형성과 유지와 배변 활동 촉진 효과가 기대되었다. 또한 DPPH free radical 소거능도 56.79%로 나타나, 항산화성이 높아 실버층의 건강에 기여할 것으로 기대되었다. 본 실험 결과, 목이버섯은 기능성 가공제품 개발의 소재로서 사용가치가 매우 높아 실버층뿐 아니라, 다양한 연령층에 적합한 가공제품 생산에 응용가능하리라 생각된다.

• 한국환경농학회지
• /
• 제32권3호
• /
• pp.207-213
• /
• 2013

Thidiazuron은 1976년 Plant Physiology 발표를 통해 생장조정제로 알려진 이후, 현재 우리나라에서도 생장조정제로 수박과 참외의 착과 증진 및 참다래의 과실비대 촉진, 포도의 과립 비대 증진 및 착립 증진 등을 위해 등록되어 사용되고 있다. Thidiazuron의 분석법은 식품공전에 수재되어 있으나, 등재 당시의 기술 이용, 일부 시험 대상 품목에 대한적용 등으로, 최근의 잔류허용기준 설정 품목의 증가와 분석기기 및 기술 발달을 반영하여 검증된 분석법으로 개선코자 하였다. 더불어, 개발된 분석법을 활용하여, thidiazuron의 사용이 허가되어 있는 수박, 키위, 포도를 포함한 국민 다소 비 식품 17품목에 대한 잔류실태조사도 수행하였다. 개발된 분석법의 회수율은, 현미 89.2~91.2 %, 고추 87.2~92.1 %, 감자 76.4~86.9 %, 수박 91.2~95.7 %, 키위 86.5~88.5 %, 포도 89.5~94.0 % 였으며, 반복 회수율 간 변이계수는 10 % 이하였다. 또한 개발된 분석법으로 우리나라에서 유통되고 있는 다소비 농산물 쌀, 상추, 사과 등 17품목 358건에 대해 농약 잔류실태를 조사한 결과 모든 시료에서 thidazulon은 검출되지 않았다.

• 지질공학
• /
• 제23권4호
• /
• pp.409-425
• /
• 2013

본 연구에서는 백두산 분화 전 지반 균열 및 거동에 의한 천지못 지반 붕괴 시나리오 별 천지못 유출수의 이동경로와 홍수 피해영향범위를 시계열로 예측하였다. 지형 지표 기상 환경 자료를 기반으로 다방향 흐름기법, 지표토양에 의한 흡수율과 초기저장량, 화구 및 분지 지형의 부피(저장공간)를 함께 고려할 수 있는 지리정보시스템 기반의 수문분석 알고리즘을 개발하였다. 백두산 지역의 화산군 분포와 지형적 특성을 고려하여 4가지 경우의 천지못 지반 붕괴 지점을 가상으로 선정하고, 개발된 알고리즘을 적용하여 천지못 유출수의 확산패턴과 시간 변화에 따른 피해영향범위를 산정하였다. 시나리오 1과 2(천지못 전체/남쪽 경계 지반 붕괴)의 경우 천지못 유출 약 3시간 경과 후부터 중국쪽 마을에 홍수피해가 발생한 반면 북한 영토는 천지못 남동쪽에 위치한 산봉우리의 지형적 특성으로 인해 거의 영향을 받지 않는 것으로 나타났다. 반면 시나리오 2의 조건에 천지못 남동쪽 산봉우리를 붕괴시킨 시나리오 3과 4의 경우에는 천지못 유출 약 3시간 경과 후부터 중국뿐만 아니라 북한 영토쪽 마을에도 1,500만톤 이상의 홍수 피해를 발생시키는 것으로 분석되었다.

• International Journal of Automotive Technology
• /
• 제8권4호
• /
• pp.437-444
• /
• 2007

This paper experimentally investigates the effects of oxygen-enriched air (OEA) on the running behaviors of an LPG SI engine during both start/warm-up (SW) and hot idling (HI) stages. The experiments were performed on an air-cooled, single-cylinder, 4-stroke, LPG SI engine with an electronic fuel injection system and an electrically-heated oxygen sensor. OEA containing 23% and 25% oxygen (by volume) was supplied for the experiments. The throttle position was fixed at that of idle condition. A fueling strategy was used as following: the fuel injection pulse width (FIPW) in the first cycle of injection was set 5.05 ms, and 2.6 ms in the subsequent cycles till the achieving of closed-loop control. In closed-loop mode, the FIPW was adjusted by the ECU in terms of the oxygen sensor feedback. Instantaneous engine speed, cylinder pressure, engine-out time-resolved HC, CO and NOx emissions and excess air coefficient (EAC) were measured and compared to the intake air baseline (ambient air, 21% oxygen). The results show that during SW stage, with the increase in the oxygen concentration in the intake air, the EAC of the mixture is much closer to the stoichiometric one and more oxygen is made available for oxidation, which results in evidently-improved combustion. The ignition in the first firing cycle starts earlier and peak pressure and maximum heat release rate both notably increase. The maximum engine speed is elevated and HC and CO emissions are reduced considerably. The percent reductions in HC emissions are about 48% and 68% in CO emissions about 52% and 78%; with 23% and 25% OEA, respectively, compared to ambient air. During HI stage, with OEA, the fuel amount per cycle increases due to closed-loop control, the engine speed rises, and speed stability is improved. The HC emissions notably decrease: about 60% and 80% with 23% and 25% OEA, respectively, compared to ambient air. The CO emissions remain at the same low level as with ambient air. During both SW and HI stages, intake air oxygen enrichment causes the delay of spark timing and the increased NOx emissions.

• 터널과지하공간
• /
• 제18권6호
• /
• pp.418-426
• /
• 2008

인도네시아 파시르탄광에서 적용되고 있는 전형적인 발파방법은 지표면을 유일한 자유면으로 하는 일자유면 노천발파 공법이다. 일반적으로 일자유면 발파방법은 자유면이 하나뿐이므로 구속이 커서 큰 지반진동을 일으키게 된다. 큰 지반진동은 다시 채광장의 경계를 이루는 사면의 안정성에 나쁜 영향을 미칠 수 있다. 이런 측면에서 발파로 인한 지반진동으로부터 파시르탄광의 채광장 사면과 폐석장의 안전을 확보할 수 있는 발파지침을 마련하기로 하였다 먼저, 파시르탄광에서 발파로 발생될 수 있는 지반진동 수준을 예측할 수 있는 예측식을 유도하였다. 다음으로, 채광장 사면과 폐석장의 폐석더미를 관리하기 위한 지반진동 허용수준을 PPV 측정치로 각각 120mm/s 및 60mm/s로 설정하였다. 도출된 예측식과 설정된 허용수준으로부터 현장에서 사용할 수 있는 안전발파를 위한 환산거리 조건식을 설정하였다. 설정된 환산거리 조건식은 채광장 사면과 폐석더미에 대해 각각 $D_s{geq}5$ 및 $D_s{geq}10$이다. 또한, 환산거리 조건식을 만족시킬 수 있도록 천공장 $3.3{sim}8.8m$에 대하여 몇 가지 표준발파패턴을 제안하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.121-123
• /
• 2002

The design of an air seat cushion for preventing decubitus ulcer includes many design factors such as the even distribution of interface pressure, the minimization of mean and peak interface pressure values, and the reduction of interface shear force and pressure gradient. It involves the anatomic condition of plegia's buttock as well as air pressure in air cells of cushion. As a result, a suitable design of the cushion satisfying the all requirements is a difficult problem. Therefore, an appropriate and effective numerical tool to develop an air cushion orthosis is required. The purpose of the present study was to develop an air seat cushion orthosis having optimized air cells for evenly distributed interface pressure between the buttock and cushion surface. For the purpose, an advanced finite element (FE) model for the design of air cushion was developed. Since the interface pressure and shear force behavior, as well as stress analyses were primary concern, a FE air cell model was developed and verified by the experiments. Then, the interactions of two cells were checked. Also, the human part of the developed numerical model includes every material property and geometry related to buttock and femoral parts. For construction of dimension data of buttock and femoral parts, CT scans were performed. A commercial FE program was employed for the simulation representing the seating process on the orthosis. Then, sensitive analyses were performed with varying design parameters. A set of optimal design parameters was found satisfying the design criteria of the orthosis. The results were utilized to produce a prototype of the orthosis. Experimentally, the buttock interface pressure distributions from the optimized and previous ones were compared. The new seat orthosis showed a significantly improved interface pressure characteristics compared to the most popular one in the market. The new orthosis will be used for the development of the AI(artificial intelligent) controlled seat orthosis fur prevention of decubitus ulcer fur various plegic patients and the elderly.

• 한국운동역학회지
• /
• 제21권3호
• /
• pp.369-382
• /
• 2011

The purpose of this study was to verify the validation of exercise effect with loading deviation during rowing exercise. We performed evaluation of based physical fitness and joint torque before the experiment for finding muscle unbalance. So we recruited twenty four subjects who have bigger muscle strength in more 20% than average one. Subjects divided two groups. One is dominant upper limbs(DU) and the other was dominant lower limbs(DL). Subjects performed rowing exercise using electric equipment (Robo.gym.Humonic.korea). Exercise is performed four sets a day including 25 times a set, and three days a week. Measurement consist of evaluation of based physical fitness and joint torque using biodex(biodex system3.USA). Evaluation of exercise effect performed each week in joint torque of shoulder, lumbar and knee joint and each month in based physical fitness. Also we adapted 30% of 1RM for muscular endurance and 70% of 1RM for muscle strength as exercise load. The results showed that the difference of maximal peak torque were getting increase significantly during exercise. Also difference of various factor in based physical fitness were getting increase significantly except flexibility and agility. This interpreted that rowing exercise with loading deviation types could provide muscle strength and muscular endurance exercise in same time. These results could be interpret to two ways. One is effect of improving physical fitness for rowing exercise and the other meaned validation of loading deviation in rowing exercise. Our study is going to verify the validation of loading deviation during rowing and we found out that loading deviation could provide muscle strength and muscular endurance exercise for improving muscle unbalance. Our study can be used development of exercise equipment and program for normal people with muscle unbalance. Also that provide effect of whole body exercise to anybody.