• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1470-1477
• /
• 2008

In this paper, a new detection method of series arc-fault signals occurring at the wiring of home appliances is proposed. The discrete wavelet transform was used for the numerical analysis of the variation rate in peak, RMS, noise energy, shoulder of the arc-fault current wave. As a results, the arc distinction threshold value of these variation rates was about 0.1 in most cases. The arc-fault current of the loads with the active PFC circuit showed a high rate of variation in noise energy and shoulder, but arc-fault current of the loads without the active PFC circuit showed a high rate of variation in peak and RMS. The arc fault current in resistive loads showed a high rate of variation in shoulder.

• Analytical Science and Technology
• /
• v.15 no.4
• /
• pp.388-391
• /
• 2002

Rancidity of a soybean oil is investigated by an electrochmical method. The redox process of the soybean oil is totally irreversible and diffusion-controlled reaction. As scan rates are faster, the anodic peak potential of the soybean oil is shifted to the positive potential and the anodic current is increased. The anodic peak potentials of the soybean oil is not rarely changed up to open-42 days in the both atmosphere and room temperature. After the open times, the anodic peak potential is largely shifted to a negative direction. This indicates the oxidation of the soybean oil becomes easier. The anodic peak current of the soybean oil is decreased gradually up to open-42 days. But after the open times, the anodic peak current increases suddenly. It must be due to the formation of a carbonyl group owing to rancidity of the soybean oil.

• Journal of Surface Science and Engineering
• /
• v.43 no.3
• /
• pp.121-126
• /
• 2010

The PS(porous Si) were fabricated with different anodization time and current density. The structural and optical properties of PS were investigated by SEM(scanning electron microscopy), AFM(atomic force microscopy), and PL(photoluminescence). It is found that the pore size and surface roughness of PS are proportional to the current density. The PL spectra show that the PL peak position is red-shifted with increasing anodization time. This behavior corresponds to the change of pore size which is consistent with the quantum confinement model. The FWHM(full width at half maximum) of PL peak is decreased from 97 to 51 nm and the PL peak position is blue-shifted with increasing current density up to 10 mA/$cm^2$. The PL peak intensity of the PS fabricated under 1 mA/$cm^2$ is the highest among samples.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1729-1734
• /
• 2007

The electrochemical behaviors of estrone in the presence of various surfactants were examined with great details. It is found that a cationic surfactant, cetyltrimethylammonium bromide (CTAB), obviously facilitates the electro-oxidation of estrone at carbon paste electrode (CPE) from the significant peak current enhancement and the negative shift of peak potential. Additionally, chronocoulometry and electrochemical impedance spectroscopy (EIS) were also used for further investigation of the electrode process of estrone, indicating that low concentration of CTAB exhibits excellent enhancement effects on the electrochemical oxidation of estrone, greatly enhances the diffusion coefficient and the electron transfer rate. Based on this, an electrochemical method was proposed for the determination of estrone. The oxidation peak current is proportional to the concentration of estrone in the ranges over 9.0 × 10?8 - 8.0 × 10?6 mol/L, and a low detection limit of 4.0 × 10?8 mol/L was obtained for 180s accumulation at open circuit (S/N = 3). Finally, this proposed method was demonstrated using estrone tablets with good satisfaction.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.755-757
• /
• 1998

The thermally stimulated current (TSC) of PVDF thin film prepared by physical vapor deposition method was investigated. PVDF shows three TSC peaks designated $P_1$, $P_2$ and $P_3$ in ascending order of temperature. The $P_1$ peak is associated with water in the PVDF specimen. $P_2$ and $P_3$ Peaks are specific peaks of $\alpha$ and $\beta$ type PVDF, respectively. The peak temperature was shifted to higher temperature, and peak intensity was decreased with increasing substrate temperature under thin film preparation.

• Elastomers and Composites
• /
• v.21 no.2
• /
• pp.121-128
• /
• 1986

Studies has been carried out on the characteristics of thermally stimulated current for polypropylene in the temperature range of $293[^{\circ}K]{\sim}403[^{\circ}K]$. The main peak observed at $366[^{\circ}K]$, as may be $\beta$ peak in conventional nomination, is believed to be depolarization current originated from the relaxation of "CO" group in monomer structure. The activation energy for the observed peak has been concluded to be in the range of $0.6{\sim}0.7[(eV]$ at $360[^{\circ}K]$ by the initial rise method. Furthermore, the initial density of carriers were calculated about $10^{22}/m^3$

• Bulletin of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.543-546
• /
• 2007

Herein, a new electrochemical method was described for the determination of ciprofloxacin based on the enhancement effect of an anionic surfactant: sodium dodecyl benzene sulfonate (SDBS). In pH 4.0 phosphate buffer and in the presence of 1.0 × 10-4 mol/L SDBS, ciprofloxacin yields a well-defined and sensitive oxidation peak at the carbon paste electrode (CPE). Compared with that in the absence of SDBS, the oxidation peak current of ciprofloxacin remarkably increases in the presence of SDBS. The experimental parameters, such as supporting electrolyte, concentration of SDBS, and accumulation time, were optimized for ciprofloxacin determination. The oxidation peak current is proportional to the concentration of ciprofloxacin over the range from 8.0 × 10-8 to 5.0 × 10-6 mol L-1. The detection limit is 2.0 × 10-8 mol L-1 after 2 min of accumulation. This new voltammetric method was successfully used to detect ciprofloxacin in drugs.

• Journal of Korean Vacuum Science & Technology
• /
• v.7 no.2
• /
• pp.45-56
• /
• 2003

A high flux metal plasma pulse ion source, which can simultaneously perform ion implantation and deposition, was developed and tested to evaluate its performance using the prototype. Flux of ion source was measured to be 5 A and bi-polar pulse power supply with a peak voltage of 250 V, repetition of 20 Hz and width of 100 ${\mu}\textrm{s}$ has an output current of 2 kA and average power of 2 kW. Trigger power supply is a high voltage pulse generator producing a peak voltage of 12 kV, peak current of 50 A and repetition rate of 20 Hz. The acceleration column for providing target energy up to ion implantation is carefully designed and compatible with UHV (ultra high vacuum) application. Prototype systems including various ion sources are fabricated for the performance test in the vacuum and evaluated to be more competitive than the existing equipments through repeated deposition experiments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.236-236
• /
• 2011

본 연구 축전 결합형 고주파 플라즈마(CCP) 식각장비에 펄스 직류(Pulse DC) 전원을 인가하여 오실로스코프(oscilloscope)를 분석하여 전기적 특성을 평가하는 것이다. 펄스 직류전원 플라즈마 시스템에서는 다양한 변수를 이해하여야 한다. 본 실험에서 사용한 공정 변수는 Pulsed DC Voltage 300~500 V, Pulsed DC reverse time $0.5{\sim}2.0{\mu}s$, Pulsed DC Frequency 100~250 kHz 이었다. 실험 결과를 정리하면 1) Pulsed DC Voltage 가 증가할수록 Input voltage의 최대값은 336~520 V, 최소값은 -544~-920 V로 변하여 피크 투 피크 (peak to peak)값은 880~1460 V로 증가였다. Input current 또한 최대값은 1.88~2.88 A, 최소값은 -0.84~-1.28 A로 변하여 피크 투피크 값은 2.88~4.24 A로 증가하였다. 이는 척에 인가되는 전류와 파워의 증가를 의미한다. 2) Pulsed DC reverse time이 증가하면 Input voltage와 Input current값이 증가했다 (Input voltage의 피크 투 피크 값은 1200~1440 V, Input current의 피크 투 피크 값은 3.56~4.56 A). 3) Pulsed DC frequency가 증가하면 주기가 짧아져 Input voltage와 Input current값이 증가 한다 (Input voltage의 피크 투 피크 값은 900~1320 V, Input current의 피크 투 피크 값은 2.36~3.64 A). 결론적으로 펄스 직류 플라즈마의 다양한 전기적 변수들은 반응기 내부에 인가되는 Input voltage와 Input current의 값에 큰 영향을 준다는 것을 알 수 있었다.

• Journal of the Korean Magnetics Society
• /
• v.14 no.4
• /
• pp.138-142
• /
• 2004

Uncertainty and characteristics of the developed current sensor by means of two identically wound magnetic cores forming a ring like for measurement of a low DC current such as leakage current was described in this paper. This transducer consists of a sensor type of a current transformer, peak value detectors, a reference alternating low frequency voltage oscillator, precision measuring circuits to measure the output signals of sensor with harmonics, and can be measured up to 2 A at DC current. The resolution and sensitivity of the sensor were 0.1㎃ and 10㎷/㎃, respectively.