• 제목/요약/키워드: peak carbon monoxide

검색결과 33건 처리시간 0.027초

인-질소 첨가제로 처리된 시험편의 연소 시에 발생하는 일산화탄소와 이산화탄소 생성 (Emission of Carbon Monoxide and Carbon Dioxide Gases during Fire Tests of Specimens Treated with Phosphorus-Nitrogen Additives)

  • 정영진
    • 공업화학
    • /
    • 제26권5호
    • /
    • pp.609-614
    • /
    • 2015
  • 이 연구에서는 피로인산/4암모늄이온, 메틸렌피페라지노메틸-비스-포스폰산, 메틸렌피페라지노메틸-비스-포스폰산/4암모늄이온의 화학 첨가제로 처리된 리기다 소나무의 연소독성가스의 생성을 고찰하였다. 15 wt%의 화학 첨가제 수용액으로 각각 리기다 소나무에 3회 붓칠하여 실온에서 건조시킨 후, 콘칼로리미터(ISO 5660-1)를 이용하여 연소독성가스의 생성을 시험하였다. 그 결과, 화학 첨가제로 처리한 시험편의 1차-최대질량감소율도달시간(1st-$TMLR_{peak}$)은 무처리 시험편에 비교하여 (66.7~250.0)%의 지체된 시간을 나타내었다. 반면에 첨가제로 처리한 시험편에 대한 최대일산화탄소 생성($CO_{peak}$), (0.0136~0.0178)% 및 최대이산화탄소 생성($CO_{2\;peak}$), (0.04432~0.3648)%은 공시험편보다 높게 나타났다. 특별히 $O_2$의 생성농도는 사람에게 치명적일 수 있는 수준인 15%보다는 훨씬 높으므로 그로 인한 위험성은 배제할 수 있었다. 그러나 화학 첨가제로 처리한 시험편은 처리하지 않은 시험편과 비교하여 연소-유독성을 부분적으로 증가시켰다.

알킬렌디아미노알킬-비스-포스폰산과 비스-디메틸아미노메틸 포스핀산으로 처리된 중질섬유판의 연소가스 발생 (Combustion Gas-emission of Medium Density Fibreboard (MDF) Treated with Alkylenediaminialkyl-bis-phosphonic Acids and Bis-(dimethylaminomethyl) Phosphinic Acid)

  • 박명호;정영진
    • 공업화학
    • /
    • 제28권1호
    • /
    • pp.112-117
    • /
    • 2017
  • 이 연구에서는 피페라지노메틸-비스-포스폰산(PIPEABP), 메틸피페라지노메틸-비스-포스폰산(MPIPEABP), N,N-디메틸렌디아미노메틸-비스-포스폰산(MDEDAP) 그리고 비스-디메틸아미노메틸 포스핀산(DMDAP)의 화학 첨가제로 처리된 중질섬유판(MDF)의 연소가스 발생을 시험하였다. 15 wt%의 인-질소산류 첨가제 수용액으로 중질섬유판에 붓으로 3회 칠하여 실온에서 건조시킨 후, 콘칼로리미터(Conecalorimeter, ISO 5660-1, 2)를 이용하여 연소가스의 발생을 시험하였다. 그 결과, 인-질소산류 첨가제로 처리한 시험편의 최대연기발생률($SPR_{peak}$)은 무처리 시험편에 비교하여 18.5~41.5%로 낮게 나타내었다. 그러나 인-질소산류 첨가제로 처리한 시험편에 대한 최대일산화탄소 생성($CO_{peak}$), (6.7~24.2)%은 공시험편보다 높게 나타났다. 또한 최대이산화탄소 발생($CO_{2peak}$), (4.2~24.4)%은 공시험편보다 낮게 나타났다. 반면에 $O_2$의 최대결핍률은 사람에게 치명적일 수 있는 수준인 15%보다 훨씬 높으므로 그로 인한 위험성은 피할 수 있었다. 결론적으로 MDF에 인-질소산류로 처리한 시험편은 부분적으로 연소성이 억제되었다. 그러나 일산화탄소의 감소에는 부정적인 영향을 미쳤다.

파일럿 분사가 저온 디젤 연소에 미치는 영향 (Effects of Pilot Injection on Low Temperature Diesel Combustion)

  • 한상욱;배충식
    • 한국자동차공학회논문집
    • /
    • 제20권3호
    • /
    • pp.141-147
    • /
    • 2012
  • A direct injection diesel engine with large amount of exhaust gas recirculation was used to investigate low temperature diesel combustion. Pilot injection strategy was adopted in low temperature diesel combustion to reduce high carbon monoxide and hydrocarbon emissions. Combustion characteristics and exhaust emissions of low temperature diesel combustion under different pilot injection timings, pilot injection quantities and injection pressures were analyzed. Retarding pilot injection timing, increasing pilot injection quantity and higher injection pressure advanced main combustion timing and increased peak heat release rate of main combustion. As a result of these strategies, carbon monoxide and hydrocarbon emissions were reduced. Soot emission was slightly increased with retarded pilot injection timing while the effect of pilot injection on nitrogen oxides emission was negligible under low combustion temperature condition. Spatial distribution of fuel from the spray targeting visualization was also investigated to provide more insight into the reason for the reduction in carbon monoxide and hydrocarbon emissions.

Analysis of Tropospheric Carbon Monoxide using MOPITT data

  • Lee, Sang-Hee;Park, Gi-Hyuk;Lim, Hyo-Suk;Lee, Joo-Hee
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.373-377
    • /
    • 2002
  • The Measurement of Pollution in the Troposphere (MOPITT) instrument is an eight-channel gas correlation radiometer launched on the Earth Observing System (EOS) Terra spacecraft in 1999. Its main objectives are to measure carbon monoxide (CO) and methane (CH4) concentrations in the troposphere. This work analyzes tropospheric carbon monoxide distributions using MOPITT data in East Asia and compared ozone distributions. In general, seasonal CO variations are characterized by a spring peak and decreased in the summer. Also, this work revealed that the seasonal cycles of CO are spring maximum and summer minimum with averaged concentrations ranging from 118ppbv to 170ppbv. The CO monthly means show a similar profiles to those of O3. This fact clearly indicates that the high concentration of CO in spring is caused by two possible causes: the photochemical CO production in the troposphere, transport of the CO in the northeast Asia. The CO and O3 seasonal cycles in northeast Asia are influenced extensively by the seasonal exchange of the different types of air mass due to the Asian monsoon. The continental air masses contain high concentrations of O3 and CO due to higher continental background concentrations and sometimes due to the contribution of regional pollution. In summer the transport pattern is reversed. The Pacific marine air masses prevail over Korea, so that the marine air masses bring low concentrations of CO and O3, which tend to give the apparent minimum in summer.

  • PDF

연소 시험에서 발생하는 일산화탄소와 이산화탄소의 발생 (Production of Carbon Monoxide and Carbon Dioxide Gases in the Combustion Tests)

  • 정영진
    • 한국화재소방학회논문지
    • /
    • 제29권5호
    • /
    • pp.7-13
    • /
    • 2015
  • 본 연구에서는 메틸렌피페라지노메틸-비스-포스폰산 금속염($PIPEABPM^{n+}$)과 메틸렌피페라지노메틸-비스-포스폰산(PIPEABP)으로 처리된 리기다 소나무의 연소독성가스의 생성을 시험하였다. 15 wt%의 메틸렌피페라지노메틸-비스-포스폰산 금속염과 메틸렌피페라지노메틸-비스-포스폰산 수용액으로 각각 리기다 소나무에 3회 붓칠하여 실온에서 건조시킨 후, 콘칼로리미터(ISO 5660-1)를 이용하여 연소독성가스의 생성을 시험하였다. 그 결과, 메틸렌피페라지노메틸-비스-포스폰산 금속염으로 처리한 시험편은 메틸렌피페라지노메틸-비스-포스폰산 철염($PIPEABPFe^{2+}$)으로 처리한 시험편을 제외하고, 메틸렌피페라지노메틸-비스-포스폰산을 처리한 시험편과 비교하여 최대일산화탄소의 생성($CO_{peak}$ production)이 (0.0136~0.0178% at 532~678 s)으로 낮게 나타났다. 그리고 금속염으로 처리한 시험편($PIPEABPM^{n+}$)은 금속염으로 처리하지 않은 시험편(PIPEABP)보다 낮은 최대이산화탄소의 생성($CO_{2\;peak}$ production)이 (0.0537~0.0628% at 532~678 s)임을 보였다. $O_2$의 생성농도는 사람에게 치명적일 수 있는 수준인 15%보다는 훨씬 높으므로 그로 인한 위험성은 배제할 수 있었다. 따라서 메틸렌피페라지노메틸-비스-포스폰산 금속염으로 처리한 시험편은 처리 하지 않은 시험편과 비교하여 연소-유독성을 부분적으로 감소시켰다.

Evaluation of Combustion Gas for Carbon Oxide of Wood Coated with Bis-(dialkylaminoalkyl) Phosphinic Acids Additives

  • Jin, Eui;Chung, Yeong-Jin
    • 한국화재소방학회논문지
    • /
    • 제30권4호
    • /
    • pp.65-72
    • /
    • 2016
  • 이 연구는 비스-(디메틸아미노메틸) 포스핀산(DMDAP), 비스-(디에틸아미노메틸) 포스핀산(DEDAP) 과 비스-(디부틸아미노메틸) 포스핀산(DBDAP)으로 처리된 리기다소나무의 연소 독성 가스의 생성에 관하여 조사하였다. 리기다소나무는 15 wt.% 방염제 수용액으로 3번 붓칠 한 후 상온에서 건조하였다. 연소 독성 기체의 생성물은 콘칼로리미터(ISO 5660-1)를 사용하여 조사하였다. 화학 첨가제로 처리된 첫 번째 피크 질량손실속도($1^{st}-TMLR_{peak}$) 시간은 처리하지 않은 시편과 비교하여 5.9%와 41.2% 범위에서 감소되었다. 두 번째 피크 질량손실속도($2^{nd}-TMLR_{peak}$) 시간은 DMDAP에 대해서 1.8%, DBDAP에 대해서 5.3% 감소하였고 DEDAP에 대하여 1.8% 증가하였다. 피크 일산화탄소 생성농도($CO_{peak}$)는 처리되지 않은 시편보다 1.5~2.0배 더 높았다. 피크 이산화탄소 생성 농도($CO_{2peak}$)는 처리되지 않은 시편과 비교하여 DMDAP에 대해 0.01배 감소되었고 DEDAP에 대해 1.15배, DBDAP에 대해 1.19배 증가하였다. 특히 산소농도는 사람에게 치명적인 15%보다 매우 높게 측정되었다. 전반적으로 가연성 기체의 연소 독성은 처리하지 않은 시편과 비교하여 화학 첨가제에 의해 부분적으로 증가하였다.

일산화탄소중독(一酸化炭素中毒)의 진료대책(診療對策) 수립(樹立)을 위한 추계학적(推計學的) 연구(硏究) (A Stochastic Study for the Emergency Treatment of Carbon Monoxide Poisoning in Korea)

  • 김용익;윤덕로;신영수
    • Journal of Preventive Medicine and Public Health
    • /
    • 제16권1호
    • /
    • pp.135-152
    • /
    • 1983
  • Emergency medical service is an important part of the health care delivery system, and the optimal allocation of resources and their efficient utilization are essentially demanded. Since these conditions are the prerequisite to prompt treatment which, in turn, will be crucial for life saving and in reducing the undesirable sequelae of the event. This study, taking the hyperbaric chamber for carbon monoxide poisoning as an example, is to develop a stochastic approach for solving the problems of optimal allocation of such emergency medical facility in Korea. The hyperbaric chamber, in Korea, is used almost exclusively for the treatment of acute carbon monoxide poisoning, most of which occur at home, since the coal briquette is used as domestic fuel by 69.6 per cent of the Korean population. The annual incidence rate of the comatous and fatal carbon monoxide poisoning is estimated at 45.5 per 10,000 of coal briquette-using population. It offers a serious public health problem and occupies a large portion of the emergency outpatients, especially in the winter season. The requirement of hyperbaric chambers can be calculated by setting the level of the annual queueing rate, which is here defined as the proportion of the annual number of the queued patients among the annual number of the total patients. The rate is determined by the size of the coal briquette-using population which generate a certain number of carbon monoxide poisoning patients in terms of the annual incidence rate, and the number of hyperbaric chambers per hospital to which the patients are sent, assuming that there is no referral of the patients among hospitals. The queueing occurs due to the conflicting events of the 'arrival' of the patients and the 'service' of the hyperbaric chambers. Here, we can assume that the length of the service time of hyperbaric chambers is fixed at sixty minutes, and the service discipline is based on 'first come, first served'. The arrival pattern of the carbon monoxide poisoning is relatively unique, because it usually occurs while the people are in bed. Diurnal variation of the carbon monoxide poisoning can hardly be formulated mathematically, so empirical cumulative distribution of the probability of the hourly arrival of the patients was used for Monte Carlo simulation to calculate the probability of queueing by the number of the patients per day, for the cases of one, two or three hyperbaric chambers assumed to be available per hospital. Incidence of the carbon monoxide poisoning also has strong seasonal variation, because of the four distinctive seasons in Korea. So the number of the patients per day could not be assumed to be distributed according to the Poisson distribution. Testing the fitness of various distributions of rare event, it turned out to be that the daily distribution of the carbon monoxide poisoning fits well to the Polya-Eggenberger distribution. With this model, we could forecast the number of the poisonings per day by the size of the coal-briquette using population. By combining the probability of queueing by the number of patients per day, and the probability of the number of patients per day in a year, we can estimate the number of the queued patients and the number of the patients in a year by the number of hyperbaric chamber per hospital and by the size of coal briquette-using population. Setting 5 per cent as the annual queueing rate, the required number of hyperbaric chambers was calculated for each province and for the whole country, in the cases of 25, 50, 75 and 100 per cent of the treatment rate which stand for the rate of the patients treated by hyperbaric chamber among the patients who are to be treated. Findings of the study were as follows. 1. Probability of the number of patients per day follows Polya-Eggenberger distribution. $$P(X=\gamma)=\frac{\Pi\limits_{k=1}^\gamma[m+(K-1)\times10.86]}{\gamma!}\times11.86^{-{(\frac{m}{10.86}+\gamma)}}$$ when$${\gamma}=1,2,...,n$$$$P(X=0)=11.86^{-(m/10.86)}$$ when $${\gamma}=0$$ Hourly arrival pattern of the patients turned out to be bimodal, the large peak was observed in $7 : 00{\sim}8 : 00$ a.m., and the small peak in $11 : 00{\sim}12 : 00$ p.m. 2. In the cases of only one or two hyperbaric chambers installed per hospital, the annual queueing rate will be at the level of more than 5 per cent. Only in case of three chambers, however, the rate will reach 5 per cent when the average number of the patients per day is 0.481. 3. According to the results above, a hospital equipped with three hyperbaric chambers will be able to serve 166,485, 83,242, 55,495 and 41,620 of population, when the treatmet rate are 25, 50, 75 and 100 per cent. 4. The required number of hyperbaric chambers are estimated at 483, 963, 1,441 and 1,923 when the treatment rate are taken as 25, 50, 75 and 100 per cent. Therefore, the shortage are respectively turned out to be 312, 791. 1,270 and 1,752. The author believes that the methodology developed in this study will also be applicable to the problems of resource allocation for the other kinds of the emergency medical facilities.

  • PDF

Analysis of Tropospheric Carbon Monoxide in the Northeast Asia from MOPITT

  • Lee, Sang-Hee;Choi, Gi-Hyuk;Lim, Hyo-Suk;Lee, Joo-Hee
    • 대한원격탐사학회지
    • /
    • 제19권3호
    • /
    • pp.217-221
    • /
    • 2003
  • The Measurement of Pollution in the Troposphere (MOPITT) instrument is an eight-channel gas correlation radiometer that launched on the Earth Observing System (EOS) Terra spacecraft in 1999. Its main objectives are to measure carbon monoxide (CO) and methane (CH4) concentrations in the troposphere. This study analyzes tropospheric carbon monoxide distributions using MOPITT data and compare with ozone distributions in Northeast Asia. In general, seasonal CO variations are characterized by a peak in spring and decrease in summer. Also, this study revealed that the seasonal cycles of CO are maximum in spring and minimum in summer with average concentrations ranging from 118ppbv to 170ppbv. The monthly average of CO shows a similar profile to those of O3. This fact clearly indicates that the high concentration of CO in spring is caused by two possible causes: the photochemical CO production in the troposphere, or the transport of the CO in the northeast Asia. The CO and $O_3$ seasonal cycles in the Northeast Asia are influenced extensively by the seasonal exchange of the different types of air mass due to the Asian monsoon. The continental air masses contain high concentrations of $O_3$ and CO due to higher continental background concentrations and sometimes due to the contribution of regional pollution. In summer the transport pattern is reversed. The Pacific marine air masses prevail over Korea, so that the marine air masses bring low concentrations of CO and $O_3$, which tend to give the apparent minimum in summer.

$CO-H_2$ 혼합 기체의 MPECVD 에 의한 다이아몬드 합성에 관한 연구 (A Study on the Diamond Synthesis by MPECVD using $CO-H_2$ Mixture)

  • 구자춘;오정섭;황기웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1989년도 하계종합학술대회 논문집
    • /
    • pp.390-393
    • /
    • 1989
  • Diamond is synthesized from the gaseous mixture of carbon monoxide and hydrogen by microwave PECVD. $10{\times}10mm^2$ silicon wafers are used as the substrate,and it can be raised more than $900^{\circ}C$ by microwave absorption, radiation by plasma and bombardment of ions. The changes of the morphology and the growth rates of the deposits with the experimental conditions are examined by Scanning Electron Microscopy. The d values of all the deposited films concide with those of powder diffraction data in XRD. In Raman spectra, the peak of the deposit coincides with that of the natural diamond which has a value of 1332.5 $cm^{-1}$, and the broad peak from 1360 $cm^{-1}$to 1600 $cm^{-1}$which represents the amorphous graphite was observed in the higher concentration of carbon monoxide.

  • PDF

Microplate Assay Measurement of Cytochrome P450-Carbon Monoxide Complexes

  • Choi, Suk-Jung;Kim, Mi-Ra;Kim, Sung-Il;Jeon, Joong-Kyun
    • BMB Reports
    • /
    • 제36권3호
    • /
    • pp.332-335
    • /
    • 2003
  • Cytochrome P450 in microsomes can be quantitated using the characteristic 450 nm absorption peak of the CO adduct of reduced cytochrome P450. We developed a simple microplate assay method that is superior to previous methods. Our method is less laborious, suitable for analyzing many samples, and less sensitive to sample aggregation. Microsome samples in microplate wells were incubated in a CO chamber rather than bubbled with CO gas, and then reduced with sodium hydrosulfite solution. This modification allowed a reliable and reproducible assay by effectively eliminating variations between estimations.