• 한국산업융합학회 논문집
• /
• 제7권2호
• /
• pp.161-166
• /
• 2004

The impact factor of bridges is analyzed based on experimental data to examine the characteristics of the dynamic responses of bridges. The experimental impact factors are compared with the impact factor of Korean Highway Design Specification and Japan T-load in terms of the span length. According to the superstructural types of bridges, the variation of the impact factor is analyzed. When vehicles are passing on a bridge, the dynamic effect acts on the bridge impact factor more than at the time of design because of the velocity of vehicles, the surface roughness reduction due to the deterioration of the bridge deck pavement, and the disconnection of the bridge entrance and the expansion joint. Because the actual value is greater than the expected value at the time of design, the dynamic response of the bridge accelerates the deterioration of the bridge due to the accumulation of fatigue, and the bridge's life-time is shortened and can have an influence on the serviceability and safety of the bridge.

• Smart Structures and Systems
• /
• 제13권5호
• /
• pp.821-848
• /
• 2014

This paper presents a novel method to carry out monitoring of transport infrastructure such as pavements and bridges through the analysis of vehicle accelerations. An algorithm is developed for the identification of dynamic vehicle-bridge interaction forces using the vehicle response. Moving force identification theory is applied to a vehicle model in order to identify these dynamic forces between the vehicle and the road and/or bridge. A coupled half-car vehicle-bridge interaction model is used in theoretical simulations to test the effectiveness of the approach in identifying the forces. The potential of the method to identify the global bending stiffness of the bridge and to predict the pavement roughness is presented. The method is tested for a range of bridge spans using theoretical simulations and the influences of road roughness and signal noise on the accuracy of the results are investigated.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.39-46
• /
• 2010

2007년부터 아이오와 주 교통국에서는 고속도로와 국도에서 FWD 장비를 이용하여 네트워크 레벨에 필요한 조사를 실시하였고 처짐 자료와 포장 구조분석 결과를 데이터베이스로 구축하는 작업을 시작하였다. 축적된 데이터베이스에 정보는 포장에 구조적 문제점을 발견하고 포장에 잔류 공용수명을 예측하여 포장에 유지보수 시점을 결정하는데 사용한다. 현재 아이오와 주 교통국에서 사용하고 있는 FWD 네트워크 레벨 조사 프로토콜은 포장 표면에 3번에 하중을 각각 재하하여 8개에 지오폰으로부터 측정한 처짐량을 이용, 역 계산을 통해 포장구조 해석을 수행하고 있으며 조사지점 수는 조사하는 도로의 구간 길이에 따라 결정하고 있다. 그러나, 현재 사용하고 있은 FWD 네트워크 레벨 조사 프로토콜은 1년 동안 아이오와 주 전체 도로 네트워크에 약 20%만을 조사할 수 있는 것으로 나타났다. 따라서, 해마다 아이오와 주 도로 네트워크에 20% 이상을 조사하기 위해서는 현재 사용하고 있는 FWD 네트워크 레벨 조사 프로토콜을 간소화해야 할 필요가 있다. 본 연구에 목적은 현재 사용하고 있는 FWD 네트워크 레벨 조사 프로토콜에서 FWD 측정 데이터에 영향을 미치지 않는 범위내에서 최소 하중 재하 수와 조사지점 수를 결정하기 위한 것이다. 83개에 합성포장 구간을 대상으로 측정한 FWD 네트워크 레벨 조사에서는 FWD 네트워크 레벨 조사 프로토콜에서 하중 재하 수와 조사지점 수를 줄여도 포장 구조해석 결과에는 크게 영향을 미치지 않는 것으로 나타났다. 간소화된 FWD 네트워크 레벨 조사 프로토콜은 FWD 측정 결과에 영향을 미치지 않으면서 측정 조사율을 높일 수 있을 뿐만 아니라 교통 통제로 인한 간접비용도 절감시킬 수 있을 것으로 기대하고 있다.

• 한국지반공학회논문집
• /
• 제33권3호
• /
• pp.49-62
• /
• 2017

지반의 동결-융해 과정에 의한 지반구조물의 거동 특성을 이해하기 위해서는 지반내 간극수의 상변화와 지반과 구조물의 상호작용에 대한 이해가 필요하다. 본 연구에서는 모듈러 도로시스템의 동결융해의 영향에 대한 수치해석적 연구를 수행하였다. Neumann의 동결-융해 이론식을 이용하여 기본 지반 물성치와 지중과 지표면의 온도조건에 대한 동결심도와 히빙량을 예측할 수 있으나, 지반의 완전포화 및 완전동결의 제한된 경우에만 적용할 수 있다. 동결지수에 따른 모듈러 도로시스템의 수치해석은 다양한 지반조건과 지하수위에 대하여 수행되었다. 동결 히빙량은 화강풍화토이나 모래지반에 비하여 실트질 지반에서 매우 크게 발생하였으며, 지하수위의 저하는 동결 히빙량을 감소시켰다. 실트질 지반에 설치된 도로시스템의 온도이력에 대한 수치해석은 지표면의 동결-융해 과정을 거치면서 지표면에 잔류히빙을 예측하였다. 이는 지반의 강성과 지지력을 급격하게 감소시켜 모듈화 도로시스템의 안정성과 사용성을 저해할 수 있다. 다만, 화강풍화토와 모래지반의 경우는 잔류 히빙량은 미비한 것으로 나타났다. 모듈러 도로시스템은 기존 도로포장 시스템과 달리 지지구조 상부에 설치된 포장 구조물이므로, 포장 구조물의 균등 연직변위와 부등 변형에 대한 엄격한 기준이 적용되어야 할 것으로 사료된다.

• Structural Engineering and Mechanics
• /
• 제63권6호
• /
• pp.761-769
• /
• 2017

Accurately extracting the axle distribution information of a passing vehicle from bridge dynamic responses experiences a key and challenging step in non-pavement bridge weigh-in-motion (BWIM). In this article, the wavelet transformation is adopted and the wavelet coefficient curve is used as a substitute for dynamic response. The driving frequency is introduced and expanded to multi-axle vehicle, and the wavelet coefficient curve on specific scale corresponding to the driving frequency is confirmed to contain obvious axle information. On this basis, an automatic method for axle distribution information identification is proposed. The specific wavelet scale can be obtained through iterative computing, and the false peaks due to bridge vibration can be eliminated through cross-correlation analysis of the wavelet coefficients of two measure points. The integrand function that corresponds to the maximum value of the cross-correlation function is used to identify the peaks caused by axles. A numerical application of the proposed axle information identification method is carried out. Numerical results demonstrate that this method acquires precise axle information from the responses of an axle-insensitive structure (e.g., girder) and decreases the requirement of sensitivity structure of BWIM. Finally, an experimental study on a full-scale simply supported bridge is also conducted to verify the effectiveness of this method.

• 한국물환경학회지
• /
• 제24권2호
• /
• pp.180-184
• /
• 2008

A distributed hydrologic model of an urban drainage area on Bugok drainage area in Oncheon stream was developed and combined with a optimization method to determine the optimal location and number of best management practices (BMPs) for storm water runoff reduction. This model is based on the SCS-CN method and integrated with a distributed hydrologic network model of the drainage area using system of 4,211 hydrologic response units (HRUs). Optimal location is found by locating HRU combination that leads to a maximum reduction in peak flow at the drainage outlet in this model. The results of this study indicate the optimal locations and numbers of BMPs, however, for more exact application of this model, project cost and SCS-CN reduction rate of structural facilities such infiltration trench and pervious pavement will have to be considered.

• KIEAE Journal
• /
• 제15권5호
• /
• pp.5-12
• /
• 2015

Purpose: Retention and infiltration of small and frequently-occurring rainfall by LID facilities account for a large proportion of the annual precipitation volume. Based on 4 standard facilities such as Porous Pavement, Infiltration Trench, Cylindrical Infiltration Well, Rectangular Infiltration Well by Seoul Metropolitan Handbook of the Prior Consultation for LID. The total retention volume of each facility was calculated according to the type and size. The Purpose of this study is to find out the quantitative relationship between Percentile Rainfall Event and Design Volume of Infiltration Facilities. Methode: For the estimation of Percentile Rainfall Event, Daily Precipitation of Seoul from 2005 to 2014 was sorted ascending and the distribution of percentile was estimated by PERCENTILE spreadsheet function. The managed Rainfall Depth and Percentile of each facility was calculated at the several sizes. In response to the rainwater charge volume of 5.5mm/hr by the Category "Private large site", the 3 types of facilities were planned for example. The calculated Rainfall Depth and Percentile were 54.4mm and 90% by the use of developed Calculation-Module based on the Spreadsheet program. Result: With this Module the existing Designed Infiltration volume which was introduced from Japan was simply converted to the Percentile-Rainfall-Event used in USA.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.576-582
• /
• 2013

Typical highway infrastructure systems include roadway pavement, drainage systems, tunneling, and other hardware components such as guardrails, traffic signs, and lighting. Tunnels in a highway system have provided significant advantages to overcoming various natural challenges including crossing underneath bodies of water or through mountainous areas. While only a few tunnel failure cases have been reported, the failure rate is likely to increase as these assets age and because agencies have not emphasized tunneling asset management. A tunnel system undergoes a deterioration life cycle pattern that is similar to other infrastructure systems. There are very few agencies in the United States implementing comprehensive tunnel asset management programs. While current tunnel asset management programs focus on inspection, maintenance, and operation safety, there is an increasing need for the development of a comprehensive life cycle tunnel asset management program. This paper describes a conceptual framework for a comprehensive tunnel asset management program. The framework consists of three basic phases including a strategic plan, a tactical plan, and an operational plan to provide better information to the decision makers. The strategic plan is a basic long term approach of tunnel asset management. The tactical plan determines specific objectives and the operational plan actually applies asset management objectives in practice. The information includes operational condition, structural condition, efficiency of the system, emergency response, and life cycle cost analysis for tunnel capital improvement project planning.

• 대한토목학회논문집
• /
• 제14권4호
• /
• pp.827-838
• /
• 1994

많은 포장구조 거동 모델은 입상재료의 거동을 묘사하는 구성방정식에 의존하고 있다. 본 연구에서는 비행장 포장의 입상재료 기층의 거동 예측을 위하여, 체적응력(bulk stress)과 팔면체 전단응력(octahedral shear stress)의 함수로 표시된 구성모델이 제안되었다. 이 모델의 특징은 비선형거동을 정확히 예측할 수 있고, 모델상수를 간단히 구할 수 있으며 전단효과에 의한 회복탄성계수의 감소현상을 나타낼 수 있다. 실내시험을 통하여 입상재료의 비선행 회복탄성거동을 관찰하였으며, 제안된 모델을 입증하기 위해 회복탄성계수를 측정하였다. 체적응력과 축차응력이 회복탄성계수의 변화에 가장 주요한 변수임이 관찰되었으며, 실내시험 결과 제안된 모델식에 의한 회복탄성계수의 예측치가 실측치와 잘 일치함을 알 수 있었다. 따라서 제안된 모델식은 비행장 포장에서 일어날 수 있는 광범위한 응력조건하의 입상재료의 회복탄성거동을 잘 묘사할 수 있음을 알 수 있다.

• 한국농공학회논문집
• /
• 제61권2호
• /
• pp.41-50
• /
• 2019

Stiffness characteristic of subgrade is one of the most important aspects for the design and evaluation of pavement and railway. However, adequate field testing methods for evaluating the stiffness characteristics of the subgrade have not been developed yet. In this study, an in-situ dynamic stiffness analyzer (IDSA) is developed to evaluate the characteristics of subgrade stiffness along the depth, and its performance is evaluated in elastic materials and a compacted soil. The IDSA consists of a falling hammer system, a connecting rod, and a tip module. Four strain gauges and an accelerometer are installed at the tip of the rod to analyze the dynamic response of the tip generated by the drop of hammer. Based on the Boussinesq's method, the stiffness and Young's modulus of the specimens can be calculated. The performance of IDSA was tested on three elastic materials with different hardness and a compacted soil. For the repeatability of test performance, the dynamic signals for force and displacement of the tip are averaged from the hammer impact tests performed five times at the same drop height. The experimental results show that the peak force, peak displacement, and the duration depend on the hardness of the elastic materials. After calculating the stiffness and elastic modulus, it is revealed that as the drop height of hammer increases, the stiffness and elastic moduli of MC nylon and the compacted soil rapidly increase, while those of urethanes less increase.