• Journal of Magnetics
• /
• 제19권3호
• /
• pp.232-236
• /
• 2014

Anisotropy coupling in thin films with mixed induced and shape anisotropies is investigated. A 200-nm-thick Co-Fe-Pd-B thin film with a large induced anisotropy of 57 Oe is fabricated and then patterned into micron-sized cells to provide shape anisotropy, whose strength has a similar magnitude to that of the induced anisotropy for enhancing the anisotropy coupling. The angles between the two mixed anisotropies considered are $0^{\circ}$, $90^{\circ}$, and $110^{\circ}$. Hysteresis loops measured under in-plane magnetic fields along various directions indicate no anisotropy coupling behaviour for all the three angles examined in this study.

• 한국재료학회지
• /
• 제34권3호
• /
• pp.144-151
• /
• 2024

This work focuses on the fabrication of excellent magnetic structures for trapping breast cancer cells. Micromagnetic structures were patterned for trapping cancer cells by depositing 30 nm of permalloy on a silicon substrate. These structures were designed and fabricated using two fabrication techniques: electron beam lithography and laser direct writing. Two types of magnetic structures, rectangular wire and zig-zagged wire, were created on a silicon substrate. The length of each rectangular wire and each straight line of zig-zagged wire was 150 ㎛ with a range of widths from 1 to 15 ㎛ for rectangular and 1, 5, 10 and 15 ㎛ for zigzag, respectively. The magnetic structures showed good responses to the applied magnetic field despite adding layers of silicon nitride and polyethylene glycol. The results showed that Si + Si₃N₄ + PEG exhibited the best adhesion of cells to the surface, followed by Si + Py + Si₃N₄ + PEG. concentration of 5-6 with permalloy indicates that this layer affected silicon nitride in the presence of Polyethylene glycolPEG.

• 한국자기학회지
• /
• 제9권6호
• /
• pp.301-305
• /
• 1999

보자력의 차이는 나타내는 NiFe(60$\AA$)/Co(5$\AA$) 두 자성층으로 구성된 NiFe(60$\AA$)/Co(5$\AA$)/Cu(40~60$\AA$)/Co(30$\AA$) 스핀밸브 박막을 일반적인 사진식각 공정을 사용하여 $\mu\textrm{m}$크기의 자기저항 메모리 셀로 패턴하고, 형상자기이방성이 자기저항 메모리 셀의 스위칭 특성에 미치는 영향에 대해 연구하였다. 자기저항 메모리 셀의 출력 및 스위칭 특성은 셀의 크기에 따라 1mA의 일정한 전류와 30 Oe 이내의 스위칭 자장에서 수 ~ 수십 mV의 출력 전압을 나타내었다. 특히, NiFe/Co/Cu/Co 스핀밸브 박막의 증착시 기판에 의해 유도된 결정성에 의한 일축자기이방성과 스핀밸브 박막을 직사각형 형태의 셀로 패턴할 때 부가되는 형상자기이방성의 크기 및 방향을 적절히 조절함으로써, 메모리 셀을 구성하는 NiFe/Co 층의 스위칭 자장을 약 1/3로 감소시킬 수 있었으며, 이는 자기저항 메모리 셀의 크기가 서브마이크론 범위로 감소될 때 발생하는 스위칭 자장의 증가 문제를 해결하는 데 도움이 될 것으로 사료된다.

• Journal of Magnetics
• /
• 제13권1호
• /
• pp.30-33
• /
• 2008

A highly sensitive, giant magnetoresistance-spin valve (GMR-SV) biosensing device with high linearity and very low hysteresis was fabricated by photolithography. The detection of magnetic nanoparticles and Fe-hemoglobin inside red blood cells using the GMR-SV biosensing device was investigated. When a sensing current of 1 mA was applied to the current electrode in the patterned active devices with an area of $2{\times}6{\mu}m^2$, the output signals were about 13.35 mV. The signal from even one drop of human blood and nanoparticles in distilled water was sufficient for their detection and analysis.