• The Journal of the Acoustical Society of Korea
• /
• v.39 no.3
• /
• pp.200-206
• /
• 2020

In this paper, we propose a broadband beamforming method using the Spatial Response Variation (SRV) which is defined to measure the fluctuation of the array spatial response within the desired frequency band. By applying the SRV to regularization term, we achieve a good quality main beam width variation less than 1 degree within the desired frequency band. In design experiments, we show that the proposed method is better than the existing method.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.977-980
• /
• 1998

A real-time holography system using LCD with CCD camera is proposed. In this system, the rainbow hologram is used since it can be reconstructed by white light source. And to record on CCD camera, a kind of in-line holography method is used to widen the width of the fringe pattern. The interference fringe pattern by proposed system is detected with CCD camera and transferred to the LCD A 3-dimensional image is reconstructed when a white light source illuminates the LCD. So it can represent 3 dimensional moving images at real-time. In this paper, to confirm the usefulness of the proposed method, the reconstructed image by holographic film is compared to the same reconstruct image by LCD. In the recording of the interferenced processing, the optimal ratio of the reference and object beam intenstiy is also investigated.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.1
• /
• pp.1-7
• /
• 1999

This study deals with linear flow pattern in steady-state or transient dual-porosity media with a vertical geologic structure such as fault, fracture zone, etc. A pumping well is located in the vertical structure of infinitesimal or finite width with high hydraulic conductivity and negligible specific storage. Selected type curves on a pumping well and observation wells in the fractured system and the matrix block are provided. The type curves on the pumping well considers both wellhole and well-loss effects.

• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.362-368
• /
• 2014

This paper proposes a harmonic reduction approach for a pulse width modulation (PWM) AC-AC converters using Bee Colony Optimization (BCO). The optimal switching angles are provided by BCO to minimize harmonic distortions. The sequences of the PWM switching angles are considered as a technical constraint. In this paper, simulation results from various optimization techniques including BCO, Genetic Algorithm (GA), and Particle Swarm Optimization (PSO) are compared. The test results indicate that BCO can provide a better solution than the others in terms of power quality and power factor improvement. Lastly, experiments on a 200W AC-AC converter confirm the performance of the proposed switching pattern in reducing harmonic distortions of the output waveform.

• Fashion & Textile Research Journal
• /
• v.8 no.4
• /
• pp.433-440
• /
• 2006

This research was made to suggest a functional and fitted prototype of swallow-tailed coat for sports dance. We established the basic posture of standard dance from literature investigations, and grasped the changes of the body side-surface by motions through the gypsum-experiments with a man in twenty. The unfolded gypsum shells were overlapped on the basic swallow-tailed coats pattern drafted by their size of experimenter. From our results through analysis, our pattern of the swallow-tailed coats for sports dance was designed considering their functional and structural character. In case of upper body with the greatly increased shoulder width of garment and with the decreased front. When moving, owing to the rising of the armpit point, the side-line becomes longer with the shoulder length decreased greatly. In case of sleeves, the length of sleeves back increased greatly by the arm-bending motions while sleeve height becomes lowered.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2001.11a
• /
• pp.25-29
• /
• 2001

소비자 감성 분석에 근거한 블록 스트라이프 패턴(block stripe pattern)의 디자인 방법을 제안하고자 남녀 30명을 대상으로 명도, 폭, 간격이 조작된 서로 다른 27개의 블록 스트라이프 패턴의 자극물을 제시하여 감성평가를 실시하였다. Likert 척도에 의해 명도, 배열, 폭, 간격의 4가지 디자인 요소가 요인분석을 통해 도출된 12개의 감성차원에 미치는 영향을 측정하고, 물리량에 근거한 정량적 분석을 통해 감성과의 관계를 파악하였다. 이를 근거로 각각의 감성에 부합하는 명도, 배열, 폭과 간격의 디자인 요소별 물리량과 함께 디자인 요소의 물리적 변화에 따른 감성예측 회귀모형을 도출하였다. 디자인 요소 중 명도차, 간격, 폭의 순으로 디자인 요소의 물리량 변화가 유의적인 감성차를 유발하는 것으로 나타났다. 이 중 명도차는 "캐주얼한"을 제외한 모든 감성에서 감성차에 영향을 미치는 가장 설명력 높은 디자인 요소로 분석되었다. 이 결과를 토대로 각각의 감성에 부합하는 디자인 요소별 물리량과 함께 디자인 프로토타입을 제시하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.2
• /
• pp.201-206
• /
• 2007

In this paper, we propose the efficient low power test methodology of NoC(Network-on chip) for the test of core-based systems that use this platform. To reduce the power consumption of transferring data through router channel, the scan vectors are partitioned into flits by channel width. The don't cares in unspecified scan vectors are mapped to binary values to minimize the switching rate between flits. Experimental results for full-scanned versions of ISCAS 89 benchmark circuits show that the proposed method leads to about 35% reduction in test power.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.34-37
• /
• 2001

This research suggested the new algorithm controlled by micro processor which is already stored by various PWM form of output voltage by using fundamental data of the carrier and signal. The determined PWM pattern is not concerned with the signal wave form and the new algorithm can obtain the desired pulse width by synchronous of carrier. The PWM wave can be controlled with real time by using extra hardware and digital software and to speed up program processing, the control signals to switch the power semi-conductor of three phase PWM inverter, simultaneously use the output signal by microprocessor and extra hardware, and control signal by software. In the end, this method was proved by applying to Three phase voltage source inverter.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.935-938
• /
• 1997

Recently, the minimum line width shows a tendency to decrease and the multi-level increase in semiconductor. Therefore, a planarization technique is needed and chemical mechanical polishing(CMP) is considered as one of the most suitable process. CMP accomplishes a high polishing performance and a global planarization of high quality. But there are several defects in CMP such as micro-scratches, abrasive contaminations, and non-uniformity of polished wafer edges. Wet etching include of Spin-etching can improve he defects of CMP. It uses abrasive-free chemical solution instead of slurry. On this study, ILD(INterlayer-Dielectric) was removed by CMP and wet-etching methods in order to investigate the superiority of wet etching mechanism. In the thin film wafer, the results were evaluated at a viewpoint of material removal rate(MRR) and within wafer non-uniformity(WIWNU). And pattern step height was also compared for planarization characteristics of the patterned wafer.

• International journal of advanced smart convergence
• /
• v.2 no.1
• /
• pp.21-23
• /
• 2013

The antenna pattern in this case has a main beam pointed in the desired signal direction, and has a null in the direction of the interference.The conventional antenna pattern concepts of beam width, side lobes, and main beams are not used, as the antenna weights are designed to achieve a set performance criterion such as maximization of the output SNR.A new direction of arrival estimation method using effects of model errors and sensitivity analysis is proposed. Two subspaces are used to form a signal space whose phase shift between the reference signal and its effects of model error signal. Through simulation, the performance showed that the proposed method leads to increased resolution and improved accuracy of DOA estimation relative to those achieved with existing method. Since a desired signal is obtained after interference rejection through correction effects of model error, the effect of channel interference on the estimation is significantly reduced.