• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.4
• /
• pp.240-249
• /
• 2016

In this study, we investigated wave force distribution at points on a vertical structure of semi-infinite breakwater considering diffraction. Wave forces of monochromatic and random waves on a vertical structure are studied considering diffractions in front and lee side of the breakwater for non-breaking wave condition. We selected width of breakwater are 0 for reference condition. In monochromatic wave case, relative wave force becomes 0 on the head of the breakwater by acting incident wave force and diffracting wave force simultaneously and oscillating patterns of relative wave force occurs based on 1.0 as distance from the head increases. Relative wave force of monochromatic waves decreases as incident wave angle increases. Relative wave force of random waves is defined by using ratio of root mean square and wave force spectrum in this study. The case considering random phase of each wave components are compared to the case which don't consider random phase and both results are almost similar. Relative wave force of random waves is also 0 near the head of the breakwater likewise monochromatic wave. Oscillating pattern of relative wave force of random waves becomes relatively weaker for composition of each wave components as distance from the head increases.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.165-182
• /
• 1997

The aim of this paper is to clarify geomorphic features on talus within ${\check{O}}rumkol$ and the origin of ${\check{O}}rumkol$. ${\check{O}}rumkol$ is located in Milyang of Kyungnam province, in South Korea. ${\check{O}}rumkol$ is good area to study talus. because it is characterized by following three geomorphic landscapes : free face surrounding ${\check{O}}rumkol$ ; ${\check{O}}rumkol$ with deep and wide valley floor ; lots of taluses typically developing within ${\check{O}}rumkol$. The main results can be summarized as follows: 1) The origin of ${\check{O}}rumkol$ may be suggested two assumptions : one is that its origin have been resulted from intrusion structure(intrusive rock might capture less resistant rock as tuff) ; the other is that its origin have been resulted from volcanic depression after intrusion or eruption. But these assumptions are not obvious. therefore more geological evidences will be supplemented after this 2) The characteristics of ${\check{O}}rumkol$ talus (1) Pattern ${\check{O}}rumkol$ taluses are tongue-shaped or cone-shaped in appearance. They are $50{\sim}200m$ in length and the range of the maximum width from 25 to 115m and one of their mean slope gradient from 32 to $36^{\circ}$ (2) Origin ${\check{O}}rumkol$ taluses have been formed under periglacial environment in the last glacial age and they are classified into rock fall talus type, considering in conjunction with the shape, hardness, sorting, weathering conditions of constituent debris. (3) The stage of landform development ${\check{O}}rumkol$ talus slope profiles are mainly concave slope. This concave slope type was eventually caused by talus creep at the lower end of the talus. That means new additions of debris from the free face have virtually ceased and there is no evidence of recent motion in the deposit. Now it is predominant that vegetation cover is gradually increasingly. Therefore ${\check{O}}rumkol$ taluses appear to be relict form stage. at present.

• Korean Journal of Materials Research
• /
• v.21 no.12
• /
• pp.697-702
• /
• 2011

Two-dimensional (2D) nano patterns including a two-dimensional Bravais lattice were fabricated by laser interference lithography using a two step exposure process. After the first exposure, the substrate itself was rotated by a certain angle, $90^{\circ}$ for a square or rectangular lattice, $75^{\circ}$ for an oblique lattice, and $60^{\circ}$ for a hexagonal lattice, and the $90^{\circ}$ and laser incident angle changed for rectangular and the $45^{\circ}$ and laser incident angle changed for a centered rectangular; we then carried out a second exposure process to form 2D bravais lattices. The band structure of five different 2D nano patterns was simulated by a beam propagation program. The presence of the band-gap effect was shown in an oblique and hexagonal structure. The oblique latticed ZnO nano-photonic crystal array had a pseudo-bandgap at a frequency of 0.337-0.375, 0.575-0.596 and 0.858-0.870. The hexagonal latticed ZnO nano-crystallite array had a pseudo-bandgap at a frequency of 0.335-0.384 and 0.585-0.645. The ZnO nano structure with an oblique and hexagonal structure was grown through the patterned opening window area by a hydrothermal method. The morphology of 2D nano patterns and ZnO nano structures were investigated by atomic force microscopy and scanning electron microscopy. The diameter of the opening window was approximately 250 nm. The height and width of ZnO nano-photonic crystals were 380 nm and 250 nm, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.1
• /
• pp.38-46
• /
• 1982

The research was carried out to determine the division of juvenile and adult wood from the pattern of variables of wood quality indicators, to investigate general low of the size of juwenile wood and to study the characteristics of juvenile and adult wood. For this study some trees of Pinus koraiensis were selected and several wood quality indicators such as annual ring width. late wood percentage, tracheid length tracheid diameter, wall thicknes, and microfibril angles were measured. The results of this study were summaried as follows. 1) Juvenile and adult wood can be divided into radial variations of wood quality indicators. In this study juvenile wood might be classified as a large fluctuated region of radial wood quality variations in the nearest part to pith. 2) Juvenile wood was indicated as a part of nearly cylinderical shape, averaging 6-11cm in radius, near pith. 3) Number of rings from pith of juvenile wood was about 12-20 and was nearly constant in uniform growth trees among the forest stands. 4) Usually adult wood was formed within the about 5-10m above ground.

• Journal of Gifted/Talented Education
• /
• v.20 no.3
• /
• pp.921-946
• /
• 2010

The purpose of this study is to devise a model of career decision in the science-gifted by exploring factors of having influence upon career decision in the science-gifted undergraduates of our country, and by examining pattern and path of career decision. By suggesting a model of structure, which synthetically considered factors of parents (parental social support), school (stress of college life, adjustment to college life), and individual characteristics(problem solving ability, career decision-making self-efficacy, conviction for major selection)as for career decision in the science-gifted undergraduates through this study, the aim was to arrange the theoretical frame for career in the science-gifted undergraduates. The research subjects were 93(class of 2007~2009) students who completed education in 2002 and 2003 at the gifted education center affiliated with University, and 264 scholarship students(class of 2005-2008) by the President at home and abroad, who are receiving scholarship by being selected as a science scholarship student by the incumbent President. The measurement tools, which were used in this study for collecting data, are test of parental social support, test of problem-solving ability, test of stress in college life, test of adjustment to college life, test of efficacy in career decision, and test of having confidence in selecting a major. For statistical analysis of the collected data, SPSS Program and AMOS Program were used. As a result, the model showed a good fit to the present data in the science-gifted undergraduates, TLI=.928, CFI=.941, RMSEA=.059. It was confirmed to be a model that is accepted in the group of the science-gifted undergraduates. Also, hypotheses, which were established on the basis of a theoretical quest, could be known to have been all adopted except one path. The results of this study can be offered as basic data for developing program and implementing a system in order to broaden the width of understanding about career and to help the career decision in the science-gifted.

• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.124-132
• /
• 2001

This study was conducted to reveal the relationship between physiological characteristics and growth by family for open-pollinated progeny stand of Korean white pine in Gapyung site. Average growth performance of total 25 families for 18 years old progeny stand in this study site showed 5.9m in mean height, 8.9cm in mean DBH, $12.0m^2$ in basal area per hectare and $46.5m^3$ in volume per hectare, respectively. By the analysis result of growth performance for all 25 families, family No. 20 showed the most excellent growth and middle in family No. 10. On the other hand, family No. 3 represented the worst growth among the 25 families. The change of seasonal photosynthesis rate by increasing luminous intensity was the same tendency as the growth pattern of all 25 families and showed the same results in all four seasons. In the seasonal analysis, the photosynthesis rate was increased as the season has changed from winter to summer. Chlorophyll contents was also increased from winter to summer. Especially, family No. 20 which is the best in growth performance has more chlorophyll contents than the others. In addition, family No. 20 was also better than other families in the weight of assimilation tissue(g), length of needle(cm), width of needle(cm), and number of Stoma. However, in water utilization rate, family No. 3 which is the worst in the growth performance showed the best result that is reverse tendency compared with the photosynthesis rate. The changes of water utilization rate represented to be increased as the season has changed from winter to summer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.2
• /
• pp.131-135
• /
• 2007

This study was performed as an effort to reduce soil loss by investigating the phase of water flow according to soil texture and rainfall pattern and by determining the canopy cover subfactor in the RUSLE (revised universal soil loss equation). Red pepper was planted at the 15% sloped lysimeter of $2m{\times}5m{\times}0.5m$ ($width{\times}length{\times}depth$) with three different textured soils (loam, clay loam and sandy loam) and the relationship between amount and intensity of rainfall; soil loss and the amount of runoff; and amount of rainfall and runoff at different soil texture were measured at the experiment station of the National Institute of Agricultural Science and Technology (NIAST) during May to October of 2005. The amount of runoff increased with increasing amount of rainfall, showing difference in the relative increase rate of runoff at different soil texture. The increase rate of runoff with unit increase of rainfall for the lysimeter with red pepper was 0.44, 0.41 and 0.13 for loam, clayey loam and sandy loam, respectively. The minimum amount of rainfall for runoff was 23.53 mm for sandy loam, 10.35 mm for loam and 5.46 mm for clayey loam, respectively. The canopy cover subfactors of red pepper were 0.425, 0.459, and 0.478 for sandy loam, loam and clayey loam, respectively.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.1
• /
• pp.21-32
• /
• 2007

Vuillaume-Okeya presented unsigned receding methods for protecting modular exponentiations against side channel attacks, which are suitable for tamper-resistant implementations of RSA or DSA which does not benefit from cheap inversions. The proposed method was using a signed representation with digits set ${1,2,{\cdots},2^{\omega}-1}$, where 0 is absent. This receding method was designed to be computed only from the right-to-left, i.e., it is necessary to finish the receding and to store the receded string before starting the left-to-right evaluation stage. This paper describes new receding methods for producing SPA-resistant unsigned representations which are scanned from left to right contrary to the previous ones. Our contributions are as follows; (1) SPA-resistant unsigned left-to-right receding with general width-${\omega}$, (2) special case when ${\omega}=1$, i.e., unsigned binary representation using the digit set {1,2}, (3) SPA-resistant unsigned left-to-right Comb receding, (4) extension to unsigned radix-${\gamma}$ left-to-right receding secure against SPA. Hence, these left-to-right methods are suitable for implementing on memory limited devices such as smartcards and sensor nodes

• Journal of the Korean Geotechnical Society
• /
• v.23 no.4
• /
• pp.25-32
• /
• 2007

Because of the increasing use of clayey soil as the backfill in reinfurced soil structures and embankments, nonwoven geotextiles of drain capability have been receiving much attention. However, there are few studies on the deformation behavior analysis of nonwoven geotextiles in reinforced soil structures in the site because nonwoven geotextiles which have low tensile stiffness and higher deformability than geogrids and woven geotextiles, are difficult to measure their deformation by using strain gauges. In this study, it was suggested that a new and more convenient method could measure the deformation behaviour of nonwoven geotextile using a strain gauge and examine the availability of the method by conducting laboratory tests and applying to two geosynthetics reinforced soil (GRS) walls in the site. The result of wide-width tensile test conducted under confining pressure of 70 kPa shows that the local deformation of nonwoven geotextile to be measured with strain gauges has a similar pattern to the total deformation measured with LVDT. In the GRS walls, nonwoven geotextile shows a larger deformation range than the woven geotextile and geogrid. However, the deformation patterns of these three reinforcement materials are similar. The function of strain gauges attached to nonwoven geotextile in the walls works normally for 16 months. Therefore, the method proposed in this study for measuring nonwoven geotextile deformation using a strain gauge has proved useful.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.318-318
• /
• 2022

Basil(Ocimum basilicum L.) is an annual herb that grows wild in hot and humid regions such as tropical Asia and Africa. This study was carried out for resource discovery, propagation, and DB construction of aromatic plants. In order to evaluate the genetic characteristics, 28 kinds of basil seeds were supplied from the Center for Genetic Resources. For basil characteristics, planting date, plant height, growth shape, leaf length, leaf shape, petiole color, petiole, stem color, flower color, after harvest, Ml length including roots, flower length, stem thickness and biological weight were measured. For anthocyanin analysis, only basil with purple color was selected, anthocyanins were extracted with 60% ethanol containing 1% citric acid, a standard quantitative curve was prepared with cyanidin-3-glucoside, and absorbance was measured at 525 nm. Basil planting started around June 16, and the flowering period lasted for a total of 18 days from July 19 to August 5. On August 6, when flowering was completed, morphological characteristics including flower color were measured at the site by an object. The measured basil plant length was 26.6-59.6 cm, leaf length 2.0-7.9 cm, leaf width 0.7-5.2 cm, and petiole 1.3-3.9 cm. The growth pattern of basil was generally straight, medium in shape. The color of the leaves was observed evenly by mixed green, purple, purple and green, and the recesses in the shape of the leaf were also conspicuously observed. A total of three basil flower colors were observed: white, light pink(149P 10P/84), and purple(37V 2.5RP 4/12). During the second growth survey after harvest, the total length including the basil roots is 26.7-52.0 cm, the flower length is 8.2-29.3cm, the stem thickness is 7.1-15.9mm, the number of stem nodes is 3-12 nodes, and the total weight of the basil was measured to be about 218-1540 g. There are a total of 16 types of basil expressed in purple, and the anthocyanin content was measured to be 73.74 ~ 380.72 mg/100g.