• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.281-282
• /
• 2006

This paper proposed a method of the camera calibration for noncontact measure of badly illumination. The method with a semi-automation camera calibration, The user designates minimum 4 points in calibration pattern. The Perspective transformation predicts the remaining point calibration pattern. It uses at input value of the Tsai and it searches a better point, When being smaller allowable error than until, it repeats and it puts out a good calibration result.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.160-163
• /
• 2008

In this paper, an auto-diagnosis method of the stator winding fault for small induction motor is suggested. 3-phase stator currents are sampled, filtered, and transformed with Park's vector transformation. After then Park's vector patterns are obtained. To detect the stator winding fault automatically, a distortion ratio is newly defined and compared with the one of healthy motor, and the threshold levels of distortion ratio are suggested. The 2-turn, 4-turn, 8-turn winding fault are tested with no load, 25%, 50%, 75%, and 100% rated load. The distortion ratio of the Park's vector patterns are increased as the increase of the faulted turns, but are same as the increase of the load.

• Food Science and Industry
• /
• v.51 no.1
• /
• pp.61-71
• /
• 2018

The evaluation of food taste is one of the important activities of human consciousness and it is practiced by sensory analysis using 5 terminal sensorial consciousness among many other functions. These consciousness activities may be conducted by 3 way branching transformation (3-WBT) logic, which choose one out of 3 options under the multi-layered consciousness decision making system. On the basis of this logic, cognitive sensory evaluation (CSE) method was developed to carry out questionnaire survey covering objective and subjective issues during consumption of food for pregnant women. The results of the CSE for several food items was presented with the Table-pattern called CSET covering consciousness factors and their effects on the food consumers.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.3
• /
• pp.269-281
• /
• 2001

This thesis deals with a novel font-dependent Hangul recognition algorithm invariant to position translation, scaling, and rotation using circular pattern vectors. The proposed algorithm removes noise from input letters using binary morphology and generates the circular pattern vectors. The generated circular pattern vectors represent spatial distributions on several concentric circles from the center of gravity in a given letter. Then the algorithm selects the letter minimizing the distance between the reference vectors and the generated circular pattern vectors. In order to estimate performances of the proposed algorithm, the completed Batang Hangul 2,350 letters were used as test images with scaling and rotational transformations. Experimental results show that the proposed algorithm are better than conventional algorithm using the ring projection in the recognition rates of Hangul letters with scaling and rotational transformation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.5
• /
• pp.343-348
• /
• 2022

The STAP system suppresses clutter and jamming of the radar signal, but required a large number of samples for optimal performance. A large number of samples increases the signal processing computation. Therefore, there is need for a transformation method for reducing the signal rank. The LCMV beamforming method can easily set the distortion-free-constraint in the direction of arrival, and the beamforming scaling is excellent, so that overall rank can be reduced. In this study, the information of target is estimated using the proposed quadratic pattern constraints(QPC) and LCMV beamforming methods. The proposed method can perform beam pattern control in a desired direction according to the number of constraint conditions as a secondary pattern constraint condition. Through simulation, the performance of the propose method is verified. As a result on th simulation, the desired target was estimated when the proposed method had an angular resolution of 10 degrees or more, but it was not possible to accurately estimate the desired target when the angular resolution was less than 10 degrees.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.789-792
• /
• 2003

Pipe inspection has a great importance to ensure safety for the nuclear power plant. In this paper, we designed visual inspection module for the tube internal, which diameter is 15${\sim}$20mm. And we made inspection module which consisted of CCD camera and light. And the relation between image and real world coordinate is established. Image processing is performed to calculate mapping parameter and analyze the size of defect. For the calculation of mapping parameter, experiment is performed using grid type test pattern. Acquired image is processed to extract image coordinate. Edge detection, thresholding, median filtering and morphology filtering is applied to extract grid pattern. Extracted image coordinate is used to calculate image to real world mapping. Lens distortion was considered and corrected to get exact data. Coordinate transformation data is provided for the users to recognize easily. Experiment was performed using grid type test pattern, we extracted lens distortion parameter and real coordinate of defect point. Radial distortion of lens was corrected but tangential distortion was not considered. As continuum to this study, the tangential distortion of lens is considered and improvement of analy zing technique for the tube internal be explored continuously.

• Korean Institute of Interior Design Journal
• /
• v.19 no.5
• /
• pp.83-94
• /
• 2010

Conventionally, ornament has developed around linear thinking based on Euclidean geometry, and been explained as simple and lucid natural Euclidean geometrical phenomena. The modular arrangement with vertical, horizontal and diagonal grids has been an organizing principle of classical ornament, but in digital era ornament is found not to be explained only with the principle of traditional arrangement due to the seemingly irregular complex forms. In that sense, this study presents the concept of digital ornament and examined the backgrounds of ornament in digital age, that are complex system and non-Euclidean geometry. Accordingly, the present study takes an approach by dividing new formal types of ornament into algorithmic form, hybrid form and dynamic form to find out a principle of pattern organization. Lately, architects who actively use computer for their architectural designs take the algorithmic strategies in nature and create various and complex patterns by simple rules. The patterns are not the repetition of the same, but the production of singularities. In addition, hybrid form by morphing shows a topologically flexible evolutionary transformation, and is used to create in-between transitional shapes from the source to target. Finally, the patterns by the interaction between the system components which are corresponded to the embedded forces emerge from dynamic simulation of the natural environment. Rather than objects itself, focus is given to the process of generating forms, and the ornamental patterns as the revelation of such implicit order provide not just the formal beauty but also spatial pathways for lights and air, maximizing the effects of lights.

• Journal of Nutrition and Health
• /
• v.10 no.4
• /
• pp.19-23
• /
• 1977

It is said that a mode of dietary behavior changes together with socioeconomic and cultural transformation. Formation of dietary habit of pre-school children influences upon direction of this changes, specially. So, this study was planned to analyst the dietary pattern of pre-school children. A survey was carried out for 3 days of 28 pre-school children with a mean age of 4 years and 3 months. Each child's matter wrote dietary pattern and kinds of food as staple, subsidiary and snack. The results showed that; (1) the average meal frequency a day was 3.1 and interval between meal was 5.1 hours (for breakfast to lunch & lunch to supper) and 12.6 hours (for supper to breakfast), (2) there were 27 different kinds of foods as staple and cereal products consumed the most among those, and 82 different kinds of foods as subsidiary and KIMCHI products were eaten the most rating, (3) the average snack frequency a day was 5.0. There were 76 different kinds of foods as snack, among them cold drink was the best. The present observation suggested that pre-school children had a tendency to take meat regularly, but snack very irregularly, and kinds of foods taken as staple, subsidiary and snack didn't keep the nutritional balance. Parent's concern about dietary behavior of their children is demanded more than ever.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.1
• /
• pp.98-103
• /
• 1989

A new system for logic optimization at gate-level is proposed in this paper. Ths system is rule-based, i which the rules represent the local trnsformation replacing a portion of circuits with the simplified equivalent circuits. In this system, 'rule generalization' and 'local optimization' are proposed for effective pattern matching. Rule generalization is used to reduce the circuit-search for pattern matching, and local optimization, to exclude unnecessary circuit-search. In additionk, in order to reduce unnecessary trial of pattern matching, the matching order of circuit patern is included in the rule descriptions. The effectiveness of this system is shown by its application ot the circuits which are generated by a hardware compiler.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.512-519
• /
• 2012

This paper proposes a 3-D pose (positions and orientations) estimation system based on the recognition of circular ring patterns. To deal with monocular vision-based pose estimation problem, we specially design a circular ring pattern that has a simplicity merit in view of object recognition. A pose estimation procedure is described in detail, which utilizes the geometric transformation of a circular ring pattern in 2-D perspective projection space. The proposed method is evaluated through the analysis of accuracy and precision with respect to 3-D pose estimation of a quadrotor-type vehicle in 3-D space.