• 치과방사선
• /
• 제29권1호
• /
• pp.175-189
• /
• 1999

The purpose of this study was to established the characteristic radiographic features in salivary gland diseases by means of sialography and scintigraphy. Sialograms and scintigrams with diseases of salivary gland were examined. In this group were 5 salivary stones, 14 sialadenitis, 17 Sjogren's syndromes and 8 benign tumors. The obtained results were as follows; 1. In the configuration of the shape of main duct, those revealed that modified curvilinear and curvilinear types were predominant in Sjogren's syndromes but reverse sigmoid and angular types were in sialolithiasis and sialadenitis combined with sialodochitis. 2. In the configuration of the course of main duct, those revealed that smooth types were predominant in sialadenitis and irregular types were predominant in Sjogren's syndromes and benign tumors and irregular types were seen in all salivary stones and sialadenitis combined with sialodochitis, 3. In the type of intraglandular pattern, those revealed that destructive changes of salivary duct system and parenchyma were severe in sialadenitis and salivary stones and predominantly severe in Sjogren's syndromes. 4. The function of salivary gland was decreased severely in Sjogren's syndrome. and also decrease in salivary stone and sialadenitis. In benign tumor, the uptake of radioisotope was not seen in lesion and the function of salivary gland decreased in its remaining normal parenchyma.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권10호
• /
• pp.458-463
• /
• 2003

In order to develope piezoelectric transformer for the ballast of fluorescent lamp, a new shape and electrode pattern of piezoelectric transformer has been investigated in this work. The composition of piezoelectric ceramics was 0.95Pb(Zr$_{0.51}$Ti$_{0.49}$)O$_3$+0.03Pb(Mn$_{1}$3/Nb$_{2}$3/)O$_3$+0.02Pb(Sb$_{1}$2/Nb$_{1}$2/)O$_3$. The sample prepared by this composition system showed the characteristics which has about 1200 of relative dielecric constant, 1100 of the mechanical quality factor, 0.53 of the electromechanical coupling coefficient, 320 pC/N of the piezoelectric constant d$_{33}$, 0.3 % of the dissipation factor. Diameter and thickness of disk-type piezoelectric transformer was 45 mm and 4 mm, respectively. The driving and generating electrode with their gap of 1mm were fabricated on the top surface. But the common electrode was fabricated on the whole bottom surface. The electrode surface ratio of driving and generating part on the top surface ranges from 1.4:1 to 3:1. We investigated the electrical characteristics with the variation of the electrode surface ratio of driving and generating part in the range of load resistance of 100 $\Omega$～70 k$\Omega$. The set-up voltage ratio of this piezoelectric transformer increases with increasing both the electrode surface of driving part and the load resistance. The set-up voltage ratio at no load resistance was more than 60 times. On the other hand, the efficiency decreases with increasing the electrode surface of driving part. In the case of the electrode surface of both 1.4:1 and 2:1, maximum efficiency showed above 97 % at load resistance of 2 k$\Omega$. However, in the case of the electrode surface of 3:1, maximum efficiency showed about 94 % at load resistance of 3 k$\Omega$.>.>.>.

• Geomechanics and Engineering
• /
• 제14권4호
• /
• pp.337-344
• /
• 2018

The study of the mining effect influenced by a normal fault has great significance concerning the prediction and prevention of fault rock burst. According to the occurrence condition of a normal fault, the stress evolution of the working face and fault plane, the movement characteristics of overlying strata, and the law of fault slipping when the working face advances from footwall to hanging wall are studied utilizing UDEC numerical simulation. Then the inducing-mechanism of fault rock burst is revealed. Results show that in pre-mining, the in situ stress distribution of two fault walls in the fault-affected zone is notably different. When the working face mines in the footwall, the abutment stress distributes in a "double peak" pattern. The ratio of shear stress to normal stress and the fault slipping have the obvious spatial and temporal characteristics because they vary gradually from the higher layer to the lower one orderly. The variation of roof subsidence is in S-shape which includes slow deformation, violent slipping, deformation induced by the hanging wall strata rotation, and movement stability. The simulation results are verified via several engineering cases of fault rock burst. Moreover, it can provide a reference for prevention and control of rock burst in a fault-affected zone under similar conditions.

• 복식
• /
• 제56권9호
• /
• pp.83-97
• /
• 2006

This Study is a thesis presenting handicrafty and decorative textile design as well as sensual fashion design through the works of Gustav Klimt. The result is as below; The formative qualities in the works of Klimt could be featured as decorativeness, sensuality and symbolism. First, the decorative inclination is prominent in the portrait and the effect is maximized with the golden mosaic shape expressed on the dress and the background influenced by the Byzantine. Second, the sensuality could be recognized directly from the women's pose or facial expression in the works of Klimt, otherwise appeared on the refined expression showed on the portraits of noble lady Third, to surpass the reality, Klimt preferred the symbolic expression, which can be shown on the patterns in the works addressing the themes such as the legends and myths, or figures of men and women expressed with the image of an abstract features of membrum. The development of the textile design is as fellowed. First, it analyzes and reconstitutes the formativeness and the element of design in the works of Klimt by the flow of the form factor. Second. it makes a pattern of a single nature through perception, analysis, description and drawing and expresses with realization of the characteristics of Klimt. Focusing on the handicrafts and decorativeness out of the latest trends and making the most use of the sensuality, the designed textiles were completed by the handicrafty techniques, used in the fashion design and completed as the design of sensual images. The textile development aims at minimizing the limit of design that can be caused by the absence of silhouette and detail, expanding the range of its creativity of fashion designs and creating fashion design high value-added.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1561-1580
• /
• 2015

No significant improvement has been observed on the seismic performance of the ordinary steel reinforced concrete (SRC) columns compared with the reinforced concrete (RC) columns mainly because I, H or core cross-shaped steel cannot provide sufficient confinement for core concrete. Two improved SRC columns by constructing with new-type section steel were put forward on this background: a cross-shaped steel whose flanges are in contact with concrete cover by extending the geometry of webs, and a rotated cross-shaped steel whose webs coincide with diagonal line of the column's section. The advantages of new-type SRC columns have been proved theoretically and experimentally, while construction measures and seismic behavior remain unclear when the new-type columns are joined onto SRC beams. Seismic behavior of SRC joints with new-type section steel were experimentally investigated by testing 5 specimens subjected to low reversed cyclic loading, mainly including the failure patterns, hysteretic loops, skeleton curves, energy dissipation capacity, strength and stiffness degradation and ductility. Effects of steel shape, load angel and construction measures on seismic behavior of joints were also analyzed. The test results indicate that the new-type joints display shear failure pattern under seismic loading, and steel and concrete of core region could bear larger load and tend to be stable although the specimens are close to failure. The hysteretic curves of new-type joints are plumper whose equivalent viscous damping coefficients and ductility factors are over 0.38 and 3.2 respectively, and this illustrates the energy dissipation capacity and deformation ability of new-type SRC joints are better than that of ordinary ones with shear failure. Bearing capacity and ductility of new-type joints are superior when the diagonal cross-shaped steel is contained and beams are orthogonal to columns, and the two construction measures proposed have little effect on the seismic behavior of joints.

• 대한조선학회논문집
• /
• 제30권1호
• /
• pp.94-103
• /
• 1993

NACA0020 단면을 갖는 타원형 날개끝에서 발생되어 전개되는 Tip Vortex를 연구하기 위하여 날개표면과 후류에서의 유동특성을 조사하였다. 날개표면 유동은 Tufts법과 캐비테이션 관찰로 분석되었으며 날개표면 압력계측으로 유동가시화 결과를 보완하였다. 연구결과 강력한 스팬방향 압력구배가 Tip Vortex 생성에 결정적 영향을 줌과 아울러 날개 양쪽면에서의 유동이 공히 보오텍스의 생성에 기여함을 알 수 있었다. 한편, 자세한 Tip Vortex의 구조를 보기위하여 캐비테이션 관찰, Laser Sheet 기법에 의한 보오텍스 단면가시화 및 유속계측이 실시되었는데 보오텍스의 형상과 강도는 날개의 받음각에 지배되어 나타났다. 날개끝 유동의 전반적인 특성은 비점성유동 가정하에서 사용되는 보오텍스 모델링을 보완할 목적으로 분석되었다.

• 동아시아식생활학회지
• /
• 제21권3호
• /
• pp.429-437
• /
• 2011

This study evaluated on the purchasing patterns for bakery products and the effects of brand image on consumers' purchasing power while living in the Seoul area. The questionnaires developed for this study were distributed to 400 males and females aged 20 and older. A total of 385 questionnaires were used for analysis (96.0%) and the statistical analysis, descriptive analysis, and $x^2$-test were completed using SPSS (version 14.0) software. When purchasing bakery products, 'taste' (59.7%) was most important followed by 'shape and size' (13.2%), 'ingredients' (11.7%), 'price' (7.5%), 'expiration date' (5.2%). 'origin of ingredients' (2.1%), and 'packaging' (0.5%). Subject showed significant differences in their purchase of bakery products based on characteristics including 'age' (p<0.05), 'occupation' (p<0.01), 'type of family' (p<0.01), and 'income' (p<0.1) The most influential factor in purchasing bakery products was 'material' (score=3.73), followed by 'name value' (score=3.56). Brand image of bakery had an effect on bakery products as 'present' (score=3.83), 'sanitation' (score=3.58). And, the most high respondent in basis of deciding brand image consumer's was 'clean and nice interior'(53.1%), followed by 'high quality ingredients and packaging'(23.7%).

• 암석학회지
• /
• 제27권1호
• /
• pp.17-24
• /
• 2018

백두산 화산으로부터 폭발성 분화에 의한 것으로 추정되는 1654년의 조선왕조실록에 기록된 화산재 구름 이동의 역사기록을 화산학적 견지에서 고찰하였다. 1654년 10월 21일에 백두산에서 분화된 화산재와 화산가스가 북풍~북동풍의 바람을 타고 낮은 고도로 운반되어 재구름과 함께 한반도 남쪽으로 내려온 화산재로 해석할 수 있다. 그 영향 지역이 북쪽으로 함경도 남쪽 경계부에도 출현하였다는 것은 그 북쪽 즉 백두산에서 한반도 남쪽으로 남하한 것으로 평가된다. 분화지점인 백두산으로부터 약 500 km 이상 떨어진 경기도 적성과 장단 지역에 재구름이 통과한 것은 당시 백두산에서 중규모의 플리니식 분화로 형성된 분연주가 탁월풍의 영향으로 굽어진 형태로 지면을 따라 재구름을 형성하여 이동한 결과로 해석된다. 이를 유사 기상 장에서 수치 모의하여 재현하였다.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.44-49
• /
• 2020

One of display trends today is development of high pixel density. To get high PPI, a small size of pixel must be developed. RGB pixel is arranged by evaporation process which determines pixel size. Normally, a fine metal mask (FMM; Invar alloy) has been used for evaporation process and it has advantages such as good strength, and low thermal expansion coefficient at low temperature. A FMM has been manufactured by chemical etching which has limitation to controlling the pattern shape and size. One of alternative method for patterning FMM is laser micromachining. Femtosecond laser is normally considered to improve those disadvantages for laser micromachining process due to such short pulse duration. In this paper, a femtosecond laser drilling for thickness of 16 ㎛ FMM is examined. Additionally, we introduce experimental results for controlling taper angle of hole by vibration module adapted in laser system. We used Ti:Sapphire based femtosecond laser with attenuating optics, co-axial illumination, vision system, 3-axis linear stage and vibration module. By controlling vibration amplitude, entrance and exit diameters are controllable. Using vibrating objective lens, we can control taper angle when femtosecond laser hole drilling by moving focusing point. The larger amplitude of vibration we control, the smaller taper angle will be carried out.

• 대한의용생체공학회:의공학회지
• /
• 제17권1호
• /
• pp.61-70
• /
• 1996

In cementless total hip arthroplasty(THA), an initial stability of the femoral component is mandatory to achieve bony inyowth and secondary long term fixation. Primary stability of the femoral component can be obtained by minimizing the magnitude of relative micromotions at bone stem interface. An accurate evaluation of interf'ace micromotion and stress/strain fields in the bone-implant system may be relevant for better understanding of clinical situations and improving THA design. Recently finite element method(FEM) was introduced in'orthopaedic research field due to its unique capacity to evaluate stress in structure of complex shape, loading and material behavior. The authors developed the 3-dimensional finite element model of proximal femur with $Multilock^{TM}$ stem of 1179 blick elements to analyse the micromotions and mechanical behaviors at the bone-stem inteface in early post-operative period for the load simulating single leg stance. The results indicates that the values of relative motion for this well fit stem were $150{\mu}m$ in maximum $82{\mu}m$ in minimum and the largest relative motion was developed in medial region of Proximal femur and in anterior-posterior direction. The motion in the proximal bone was much greater than in the distal bone and the stress pattern showed high stress concentration on the cortex near the tip of the stem. These findings indicate that the loading on the hip joint in the early postoperative situation before achieving bony ingrowth could produce large micromotion of $150{\mu}m$ and clinicaly non-cemented THA patient should not be allowed weight bearing strictly early in the postoperative period.